0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

Etekcity aggiornamento termometro a infrarossi 774, pistola termica per temperatura di cottura, strumento di superficie IR laser per pizza, piastra, grill, HVAC, motore, accessori, da -58 ° F a 842 ° F, aggiornamento giallo medio giallo

Brand:Etekcity

3.7/5

€
45.90

Non utilizzare su esseri umani: il Lasergrip è destinato esclusivamente all'uso su oggetti inanimati. Misurare la temperatura di un essere umano o di un animale non è sicuro. 2 batterie AAA incluse: Lasergrip è stato aggiornato per funzionare con 2 batterie AAA preinstallate, che sono più convenienti da sostituire rispetto alle batterie da 9 V. Funzionalità aggiuntive: il nuovo Lasergrip è dotato di una modalità di temperatura massima e di un display LCD retroilluminato. Inoltre, la funzione di spegnimento automatico prolunga la durata della batteria, mentre l'indicatore di batteria scarica ti consente di sapere quando è il momento di cambiarne un paio. Design versatile: la tecnologia a infrarossi consente di misurare vari oggetti a casa e all'aperto; Usalo per grill, piastra, cucina, motore del veicolo, uso automobilistico, forni, aria condizionata, frigoriferi, lavori fai-da-te, ambiente per animali domestici, ecc. Ampia gamma: scegli la tua unità preferita e misura le temperature ovunque all'interno della gamma aggiornata di -58°–842°F / -50°–450°C. Quindi guarda come il tuo risultato appare sul luminoso display LCD in meno di mezzo secondo. Emissività regolabile: il Lasergrip aggiornato consente di modificare rapidamente l'emissività da 0,1 a 1,0 tenendo premuti i pulsanti Su e Giù. Sia che tu stia lavorando sulla tua auto o testando la temperatura della tua griglia, il Lasergrip può aiutarti a portare a termine il lavoro. Migliore precisione: il rapporto distanza-punto di 12:1 del Lasergrip consente di misurare con precisione i bersagli da una distanza confortevole. Per ottenere i migliori risultati, posizionare il termometro a circa 14,17 pollici/36 centimetri dal bersaglio.

Quantity
Aggiungi al carrelloCompra subito

EAN: 0810043378093

Categories: Prodotti industriali e scientifici, Testare, misurare e ispezionare, Temperatura e umidità, Termometri, Termometri a infrarossi,

Non utilizzare su esseri umani: il Lasergrip è destinato esclusivamente all'uso su oggetti inanimati. Misurare la temperatura di un essere umano o di un animale non è sicuro. 2 batterie AAA incluse: Lasergrip è stato aggiornato per funzionare con 2 batterie AAA preinstallate, che sono più convenienti da sostituire rispetto alle batterie da 9 V. Funzionalità aggiuntive: il nuovo Lasergrip è dotato di una modalità di temperatura massima e di un display LCD retroilluminato. Inoltre, la funzione di spegnimento automatico prolunga la durata della batteria, mentre l'indicatore di batteria scarica ti consente di sapere quando è il momento di cambiarne un paio. Design versatile: la tecnologia a infrarossi consente di misurare vari oggetti a casa e all'aperto; Usalo per grill, piastra, cucina, motore del veicolo, uso automobilistico, forni, aria condizionata, frigoriferi, lavori fai-da-te, ambiente per animali domestici, ecc. Ampia gamma: scegli la tua unità preferita e misura le temperature ovunque all'interno della gamma aggiornata di -58°–842°F / -50°–450°C. Quindi guarda come il tuo risultato appare sul luminoso display LCD in meno di mezzo secondo. Emissività regolabile: il Lasergrip aggiornato consente di modificare rapidamente l'emissività da 0,1 a 1,0 tenendo premuti i pulsanti Su e Giù. Sia che tu stia lavorando sulla tua auto o testando la temperatura della tua griglia, il Lasergrip può aiutarti a portare a termine il lavoro. Migliore precisione: il rapporto distanza-punto di 12:1 del Lasergrip consente di misurare con precisione i bersagli da una distanza confortevole. Per ottenere i migliori risultati, posizionare il termometro a circa 14,17 pollici/36 centimetri dal bersaglio.
Age Range (Description) Adult
Batteries 2 AAA batteries required.
Brand Etekcity
Color Medium Yellow
Connectivity Technology Infrared
Country of Origin China
Customer Reviews 4.6 4.6 out of 5 stars 41,921 ratings 4.6 out of 5 stars
Display Type LCD
Included Components Battery Pack
Item model number Lasergrip 774
Item Weight 5.6 ounces
Manufacturer Etekcity
Model Name Lasergrip 774 Upgrade
Number of Batteries 2 AAA batteries required.
Package Dimensions 7.11 x 3.82 x 1.57 inches
Power Source Battery Powered
Response Time 500 Milliseconds
Reusability Reusable
Special Feature Non Contact
Style Upgrade
Unit Count 1.0 Count

3.7

13 Review
5 Star
77
4 Star
14
3 Star
5
2 Star
2
1 Star
3

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Joel
As good as can be expected
I originally bought this thermostat temperature reading laser gun to keep an eye on what the temperature is going into the supply and coming out of the return because Summer is here and I want to make sure that my air conditioner is running efficiently in the way that it should be and performing my due diligence even though I'm not an HVAC technician I know how to do basic things and I know a little about a lot of things, so I cleaned the coils on my outside unit because they were absolutely filthy after going through the very windy winter months and every year about this time I take off the cover to expose the coils and I gently and carefully with a hose using my thumb as the sprayer clean each layer very slowly and carefully without damaging the coils and removing as much dirt as I possibly can and I usually take about an hour and a half to two hours doing that to make sure that I have cleaned it as good as I possibly can so that way I know it will have no problem sucking in air and it won't be struggling to do so and also checking my filter which I use the cheap filters so that way there are no air restrictions instead of the pleated cloth filters which causes more problems than most people realize, I use the cheap fiberglass filters which do exactly the same thing except they allow for easy air flow which is exactly what you want and then I check my evaporator to make sure that was clean and I just had to clean that off a little bit and maybe the only thing I have it done is taking a vacuum and stuck it inside of each register to clean whatever little bit of junk gets in there every now and then but I'm not too worried about that because there's never really anything in there, I don't have kids so there's no one to throw toys or trash or whatever in there and I also got myself a brand new thermostat because I believe my other one was on the fritz and it was giving me questionable temperature readings and my unit seem to be running longer than it should be and not cutting off when it should be so I did away with the seven day programmable bullcrap thermostat and got a simple single stage non-programmable thermostat with a cool off and heat button and that's that with a big digital display and a bright light up screen in the background and I've had that for about a week so I have been monitoring that quite often on a daily basis as well as making sure the temperatures are where they should be as far as going into the return and coming out of the supply and I have my thermostat set right around 68° and using this thermostat gun after letting my air conditioner run for a good 20 to 25 minutes to get a consistent temperature I then start measuring the temperature of the air coming out of each event which should be anywhere between a 15° and 20° difference than the temperature I have my thermometer set at and right now I have it set at 67° and as you can see by the picture I posted after I just took the temperature coming out of my vent in the kitchen it read 51° which is exactly right around where I want it and I went around to each vent in my house and check the temperature from each one and I have a basement so of course it's going to very because it's cooler in the basement so it rained anywhere from 48° to 52° and it just gives me more confirmation and knowing that my air conditioning unit is running efficiently and working as it should be and these are all simple things that any homeowner can do if they think that they're having any kind of issues, check the easy things first at any homeowner can check before freaking out and calling an AC repairman to come over and spending a whole lot of money that you didn't need to spend which usually happens 9 times out of 10... As far as I can tell this thermostat gun is about as accurate as I would expect it to be, I can't say that it's 100% accurate but I don't think I would be able to say that about any different kind of thermostat, but I tested it on several different things and it is about as close as I needed to be so I would definitely recommend this product
Scritto da: debbie smith
previously opened and returned
We received the item so we can get temps for our Blackstone grill. Immediately upon opening the easily resealable package and once I understood it had pre-installed batteries you could see the battery insulation strip was missing. So not brand new, previously opened snd returned which means I have to fully inspect it to make sure all is ok. There is a TINY battery indicator which stays lit for only a split second. Because it os so tiny and hard to read we only THINK it showed full battery. We could not find any way to keep the battery indicator lit longer. I understand they might have provided a resealable package for those neat-freaks who might want to store it there to keep it looking new, etc... I also believe that if they are sending you a previously opened/returned item there should at least be a sticker or note saying "Previously opened and returned, Fully inspected." Also, Best Buy sells open-box items for less than new price. OR perhaps this is a good defense as to why some companies use packaging that must be practically destroyed to open it and therefore obviously opened if/when returned. We are still deciding if we should return/replace it.... Not sure if tis is Amazon's fault or Etekcity...
Scritto da: herbalflows
Good for reptile enclosures ????
Works great for checking my reptile tanks heat temps, I have internal thermometers in most my tanks and it reads about the same. I think this heat gun is more accurate so I would definitely recommend this for any other reptile lover out there. The battery has lasted me like 4 months and it’s still going.
Scritto da: Kateland Ballantyne
Works great!
I use this to monitor the temperatures of my lizard’s terrarium. It does a great job and I love that it came with a battery.
Scritto da: s simon
A must for griddle use
So glad we spent the extra $$ for this purchase. Really helps with temperature control.
Scritto da: jj
Great value
This gun works good. Seems to be of good quality and good accuracy. It's definitely a great value for the price.
Scritto da: Azure
Serves Its Purpose
I've had mine for about over two years now and it still works perfectly for checking the temperatures in my snake's enclosure and around the house! Hopefully, it will continue to last for the next few years but I'll definitely be purchasing another when this one eventually dies.
Scritto da: curtis wehner
Perfect for the kitchen
This has been very helpful in knowing the temperature of pans and oil while cooking.
Scritto da: Darren MacCallum
As advertised
Certainly not the best quality tool but does the trick, works well.
Scritto da: Experience Guy
Life saving IRT!
I can always get the correct temperature on my the bbq, griddle or fry pan; no more guess work. Oh ya it also measures current. Great investment!
Scritto da: Peter
Reliable and versatile
Excellent thermometer, used it to measure temperature in the kitchen for soap making, checking the temperature in a dying freezer, in the vehicle maintenance checking the radiator temperature and the engine temperature, checking my child's temperature while sick...this thing is amazing! It has unlimited applications and is very accurate. Highly recommended!
Scritto da: DEAN HEWER
Works.....
It works, but the battery that cam with it was dead......so I gave 4 stars.
Scritto da: Ryan Franco
Great Tool
I have to say that is very economical and it really works for me. I never owned one before so this particular one meet my needs and expectations

Prodotti correlati

hot
Etekcity Pistola Termometro a Infrarossi da -58°F a 1130°F, Strumento Laser Temp IR per Cottura, Grill, Forno per Pizza, Piastra con Emissività Regolabile e Misura Massima con Schermo LCD a Colori Nero
3.6/5

€ 53.47

Etekcity Pistola Termometro a Infrarossi da -58°F a 1130°F, Strumento Laser Temp IR per Cottura, Grill, Forno per Pizza, Piastra con Emissività Regolabile e Misura Massima con Schermo LCD a Colori Nero
3.6/5

€ 53.47

hot
Termometro a infrarossi Klein Tools IR10, pistola termometro digitale con doppio laser di puntamento, 20:1
3.6/5

€ 159.08

Termometro a infrarossi Klein Tools IR10, pistola termometro digitale con doppio laser di puntamento, 20:1
3.6/5

€ 159.08

hot
Pinza amperometrica Extech EX810 1000A con termometro a infrarossi
2.6/5

€ 221.03

Pinza amperometrica Extech EX810 1000A con termometro a infrarossi
2.6/5

€ 221.03

hot
Termometro digitale senza contatto frontale a infrarossi Knectek iRyno per bambini e adulti
3.3/5

€ 64.46

Termometro digitale senza contatto frontale a infrarossi Knectek iRyno per bambini e adulti
3.3/5

€ 64.46

hot
Extech IR267 Mini termometro a infrarossi con tipo K
3.4/5

€ 118.86

Extech IR267 Mini termometro a infrarossi con tipo K
3.4/5

€ 118.86

hot
Supco LIT11TC Termometro laser a infrarossi con sonda, da -60 a 700 gradi C, da -76 a 932 gradi F, precisione di + o - 1 grado C
3.2/5

€ 141.07

Supco LIT11TC Termometro laser a infrarossi con sonda, da -60 a 700 gradi C, da -76 a 932 gradi F, precisione di + o - 1 grado C
3.2/5

€ 141.07

hot
MASTERCOOL 52225-A-SP Termometro a infrarossi con laser, nero
2.9/5

€ 202.34

MASTERCOOL 52225-A-SP Termometro a infrarossi con laser, nero
2.9/5

€ 202.34

hot
Etekcity Termometro a Infrarossi 1080, Pistola per Temperatura di Calore per Cucinare, Strumento per Superficie Laser IR per Forno per Pizza, Carne, Piastra, Grill, HVAC, Motore, Accessori, da -58°F a 1130°F, Termometro Classico Giallo Giallo
3.7/5

€ 57.67

Etekcity Termometro a Infrarossi 1080, Pistola per Temperatura di Calore per Cucinare, Strumento per Superficie Laser IR per Forno per Pizza, Carne, Piastra, Grill, HVAC, Motore, Accessori, da -58°F a 1130°F, Termometro Classico Giallo Giallo
3.7/5

€ 57.67

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu