BOSCH 5In. Smerigliatrice angolare con protezione Tuckpointing GWS13-50TG

Name: BOSCH 5In. Smerigliatrice angolare con protezione Tuckpointing GWS13-50TG
Brand: BOSCH
SKU: 0000346624793
Price: 442.00 EUR
Availability: InStock

Brand:BOSCH

3.3/5

€
442.00

Il pacchetto puntatore tuck Bosch GWS13-50TG è dotato di un 5 pollici. smerigliatrice angolare e una protezione antipolvere progettata specificamente per la puntatura. Bosch GWS13-50 5 pollici. La smerigliatrice angolare offre più potenza rispetto ai modelli della generazione precedente con un utensile della stessa dimensione: 13 A e 11.500 giri/min. Ha un flusso d'aria diretto che allontana la polvere dai componenti vitali e ha il raffreddamento diretto del motore, che gli conferisce maggiori capacità di sovraccarico. È dotato di una maniglia laterale Vibration Control a due posizioni e di un motore elettronico costante per avviamenti facili. Il parapolvere TG502 consente l'installazione senza attrezzi, rendendolo facile e veloce da installare e rimuovere. La regolazione della profondità variabile consente alla protezione di raccogliere la polvere per tutta la durata del taglio e l'ampia finestra di visualizzazione consente di vedere facilmente la linea di taglio.

Quantity

Aggiungi al carrello Compra subito

EAN: 0000346624793

Categories: Strumenti e miglioramento della casa, Utensili elettrici e manuali, Utensili elettrici, le smerigliatrici, Smerigliatrici angolari,

DURATA: Dotato di spazzole di carbone per fornire una maggiore durata rispetto alle spazzole della generazione precedente. Il GWS13-50TG viene inoltre fornito completo di spazzole Bosch Service Minder per informare l'utente quando è necessaria la manutenzione preventiva. PARAPOLVERE: Il GWS13-50TG viene fornito completo di un parapolvere con puntamento a piegatura progettato specificamente per applicazioni con puntamento a piegatura e consente l'installazione senza attrezzi. Il flusso d'aria diretto allontana la polvere dai componenti vitali della smerigliatrice. POTENZA: dotata di un potente motore smerigliatrice da 13 A, la smerigliatrice angolare GWS13-50TG è in grado di produrre fino a 11.500 giri/min. Oltre a ciò, il raffreddamento diretto del motore consente maggiori capacità di sovraccarico. TUCK-POINTING: la smerigliatrice angolare Bosch GWS13-50TG e il pacchetto parapolvere con puntamento tuck offrono una soluzione di puntamento tuck all-in-one che può aiutare l'utente a muoversi verso la conformità con il regolamento OSHA sulla polvere di silice.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	BOSCH
Brand	‎BOSCH
Customer Reviews	4.3 4.3 out of 5 stars 54 ratings 4.3 out of 5 stars
Included Components	‎
Item Dimensions LxWxH	12.3 x 4 x 4 inches
Item Dimensions LxWxH	‎12.3 x 4 x 4 inches
Item model number	‎GWS13-50TG
Item Package Quantity	‎1
Item Weight	5.3 Pounds
Item Weight	‎5.3 Pounds
Manufacturer	‎C & J Direct GmbH & Co. KG
Maximum Rotational Speed	‎11500 RPM
Measurement System	‎Metric
Part Number	‎GWS13-50TG
Power Source	Air Powered
Power Source	‎Air Powered
Product Dimensions	‎12.3 x 4 x 4 inches
Size	‎5"
Style	Angled
Style	‎Angled

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Joe Melton

Works well, but recommend only for larger jobs.

Worked great. I tried a tucking bar to remove old mortar between cinderblocks, and it barely scratched it. This tool, outfitted with a sandwich blade, chewed right through the motor. I'd estimate it can go the length of a cinderblock (16") in less than five seconds. The depth is adjustable; I was cutting to about 3/4" deep. I spent a lot of time looking at ads trying to figure out if the tool comes with a blade. It doesn't, and the manufacturer has gone to some length, in my opinion, to not say so in the literature. Be aware that this thing throws out an enormous amount of dust and sand-like particles. I bought the special hose to connect it to a shop vac with a paper filter, and it was clogged up after a minute or so. Outside, no vac is required, but care should be taken not to blow the debris directly at your face or at another person. I wore a full-face shield with respirator, and recommend this. My hair got terribly matted with the dust, but my eyes and nostrils were not affected. I first tried to use a 4.5" grinder, and it worked ok. This tool is much more efficient, though. If you have a very small amount of tucking to do, then go ahead and use a 4.5" grinder, like the Harbor Freight model. You won't be able to attach a hose to it, so some deep cleaning will be necessary after doing work inside.

Scritto da: NameIDidntWant

Sort of works...

I recently used a Bosch surface grinder with a dustless attachment and I was blown away by how well it collected the dust. I immediately ran to Amazon to get a dustless tuckpoint grinder too, thinking this technology was really going to change my gritty, dirty life! Unfortunately, although the surface grinder was a home run, this tool is kind of a bunt . It probably gets 60 or 70% of the dust, but 30% of the dust from grinding out mortar is still an awful lot of dust. Also, it is pretty awkward to use as you can only hold the grinder in 1 position to get full depth grinding, and the hose comes off at a weird angle. Although the depth is adjustable, the angle at which you enter is not, as the whole apparatus is pinned in place by the side handle. I'll probably keep using it, but after the first 2 jobs I'm not terribly impressed. In Bosh's defense, it's a difficult problem to tackle.

Scritto da: Heidi Roth

Heavy and hard to use

I was hoping I was getting a quality grinder. Not only did I have to find a spacer because the blades don't fit in the dust catcher, but I have had the motor stop turning while doing simple grinding of mortar joints. Sad. I spent alot of money on this new setup. Also trying to grind things to the left you can't get withing 5-6 inches because all the knobs and things.

Scritto da: K. Kim

cool but needs more power and blade

The cover does a great job of dust collecting. The down side are it does not come with any blade and the power seemed low when I was cutting to demo tile on backer board. ALso would be nice to be able to bring the blade lower with the dust collector on. it can only cut in 1.5in with the cover on.

Scritto da: Bikerprophet

Powerfull

Heavy, a monster, eats mortar and did the job as designed, saved a lot of manual labor. If you need to do tuckpointing, this is the complete tool for you, worth every penny.

Scritto da: Cari B.

Happy

Excellent purchase, better than the grinders I buy from the distributor.

Scritto da: Josh

Excellent product

Excellent product

Scritto da: Allan Wind

Repointing stairs was really easy

I needed to replace some mortar on my front stairs. As expected hammer & chisel is a lot of work and takes forever. With this grinder it was almost too easy. The only issue is that you cannot get close to the walls as the vacuum attachment is quite bulky.