Barra per trazioni ergonomica per montaggio su travetto di Ultimate Body Press

Brand:Ultimate Body Press

3.8/5

€
135.23

Barra per trazioni con montaggio su travettoLa nuova barra ergonomica per trazioni su travetto di Ultimate Body Press mette una barra per trazioni a montaggio fisso di livello commerciale in qualsiasi casa con travi a vista o travetti. Fornendo una posizione più naturale della mano, le impugnature angolate finemente sintonizzate della barra ergonomica ti aiutano a evitare un'articolazione eccessiva delle spalle e ridurre lo sforzo su polsi e gomiti per aumentare i guadagni in meno tempo.Caratteristiche della barra per trazioni• Aggiunge rapidamente forza e muscoli di qualità a spalle, schiena, braccia e nucleo• Costruzione in acciaio saldato per impieghi gravosi - viene completamente assemblata• Include hardware per barra per trazioni con montaggio su travetto e istruzioni per un facile montaggio garantito• Ordina con fiducia: il tuo acquisto include supporto tecnico USA e garanzia di soddisfazione al 100%Migliori allenamenti ogni GiornoCaratterizzata da una struttura in acciaio saldato e tubi da 1,25 pollici, la barra di montaggio per travetti si fissa facilmente alle travi a vista o ai travetti della tua casa. Il montaggio su travetto offre flessibilità di posizionamento e aiuta a preservare lo spazio del pavimento. Il montaggio su travetto è ideale anche per controsoffitti con 3" o meno di vuoto tra i pannelli del controsoffitto e il travetto. La pietra angolare di una palestra per tutto il corpo Una barra per trazioni montata è l'ancoraggio ideale per gli accessori della barra per trazioni come Bodyweight Resistance Trainers. Gli allenatori di resistenza del peso corporeo espandono i tuoi allenamenti con la barra per trazioni con movimenti composti di tutto il corpo e una resistenza infinitamente variabile fornita dal tuo peso corporeo. I bodyweight resistance trainer consentono variazioni di pull up assistite che consentono a tutti di lavorare fino a pull up completi con set completi di pull up fin dal primo giorno. Il servizio clienti dispone di risorse complete per assisterti ed è disponibile per telefono o e-mail. La tua soddisfazione è garantita al 100%, ordina oggi la tua barra per trazioni Joist Mount.

Quantity

Aggiungi al carrello Compra subito

EAN: 0804879360506

Categories: Sport e tempo libero, Esercizio e forma fisica, Attrezzatura per l'allenamento della forza, Barre di trazione,

ACQUISTA CON FIDUCIA: la barra per trazioni ergonomica con supporto per trave è supportata da Ultimate Body Press contro i difetti del produttore per 10 anni. PROGETTATO NEGLI USA: Ultimate Body Press è un'azienda della Carolina del Nord impegnata a fornire allenamenti migliori ogni giorno. Include la spedizione idonea Prime e il servizio clienti USA. ANCORAGGIO IDEALE: ancoraggio degli allenatori di resistenza al peso corporeo opzionali per trasformare la barra per trazioni in una palestra a corpo libero. Completa serie complete di pull up e altri esercizi impegnativi fin dal primo giorno con variazioni di esercizi assistiti. [venduto separatamente]. FACILE INSTALLAZIONE: la barra per trazioni Joist Mount è progettata con precisione per una facile installazione domestica e include istruzioni di montaggio, hardware completo e supporto tecnico USA. TUTTO IN ACCIAIO SALDATO: la barra per trazioni con montaggio su travetto a montaggio rigido supporta l'attenzione sulla forma in modo da poter aumentare efficacemente il numero di ripetizioni in 3 posizioni di presa. Supporti per tubi spessi 1,25" con riser da 16" per uno spazio totale. Barra per trazioni con montaggio su travetto: la barra per trazioni interamente in acciaio per case con travi a vista o travetti. La barra ergonomica offre una posizione della mano più naturale per ridurre l'articolazione della spalla e lo sforzo su polsi e gomiti per allenamenti migliori e maggiori guadagni.

Age Range (Description)	‎Adult
Brand	Ultimate Body Press
Brand	‎Ultimate Body Press
Brand Name	‎Ultimate Body Press
Color	Black
Color	‎Black
Customer Reviews	4.7 4.7 out of 5 stars 380 ratings 4.7 out of 5 stars
Included Components	‎Ergonomic Joist Mount Pull Up Bar
Item Dimensions LxWxH	‎48 x 1.25 x 15 inches
Item Package Dimensions L x W x H	‎38 x 12 x 3.5 inches
Item Weight	‎6.5 Pounds
Manufacturer	‎Ultimate Body Press LLC
Material	Alloy Steel
Material	‎Alloy Steel
Maximum Weight Recommendation	500 Pounds
Maximum Weight Recommendation	‎500 Pounds
Model Name	‎Ergonomic Joist Mount Pull Up Bar
Model Year	‎2015
Mounting Type	Wall Mount
Mounting Type	‎Wall Mount
Package Weight	‎5.38 Kilograms
Part Number	‎JMP-S
Suggested Users	‎Unisex-Adult
Warranty Description	‎10 Year Limited

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Dude

A really nice bar

The bar that I received was quality perfect. Everything was straight with no issues with welds, paint, etc. I used the included bolts for two of the top holes and I used two lag bolts that I bought for the bottom holes. This made it easier to get to in my case. So like anything else that you buy sight unseen you can get good and you can get not so good. This bar was perfect in every way. YMMV

Scritto da: DandyRandy

Great pull-up bar!

Love it! Only complaint is that it is smooth and makes it harder to keep a grip. I put a little duct tape on where I hold on or you can use some weight lifting chalk. Having it right out the door to my garage makes me more consistent and I am up to 3 sets of 6 Marine pull-ups - full extension and no knee ups.

Scritto da: Buzz H.

Nice Bar

Very good quality for the price. All welded hollow construction of adequate gauge, powder coated steel, with heavy black phosphate bolts included. Should be long lasting for all but the very most strenuous gym use. I wrapped with grip tape to give better purchase. Note: I think the two things this bar is missing are easily added. The first is a block of material to place inside each square tube, under the bolts, to keep the tube from collapsing or deforming when the the bolts are torqued very tight. I used a piece of oak scrap wood I had on hand and drilled holes with the wood inserted inside the tube. The second is four additional washers to place under the nuts being fastened down against wood, since I used the ones which came with the kit on the bolt head side. With the added washers and material inside the tubes, I was able to torque the assembly much tighter than would be otherwise possible, making the installation overall much tighter, more solid, and less likely to shift and loosen over time. I’m very happy with this bar, it should last a very long time.

Scritto da: Techjunkie

Perfect at highest mounting position. Read my installation tip.

This is my second pull-up bar. The first, a ceiling mounted straight bar installed in my finished garage, would have hung too low to move to the basement. This ergonomic grip, rafter-mounted bar is perfect for the new location. It measures 16.3 inches top to bottom. Mounted with its top adjacent to standard 7” rafters, it provides 8” of clearance between the bottom of the rafter and the top of the lowest parts of the crossbar. Being that my quarter basement ceiling is low, I have to bend my knees to avoid touching down between reps, which is perfectly acceptable in exchange for not smashing my head at the top of the reps. Hardware was included and installation took only a few minutes. I discovered it was easiest to use a 3/8” bit instead of the recommended larger 7/16” bit. Rather than installing one bolt and then marking the remaining three spots with a pen, I opted to hold the bar in place and just drill through it for the last three holes. This allowed me to drill level and true so the bolts (which fit snugly through the smaller than recommended holes) lined up with ease. I prefer the ergo shape to my straight bar and have yet to hit my head. If a drop ceiling were installed, I’d have mounted it as low as possible instead.

Scritto da: Joe K.

It will work if you do

It's not quite all steel. The end caps are plastic and as you can see in the photo this one either slipped through the QC process or construction isn't so premium. Regardless, it's a pull bar so not worth the hassle of returning it but, also no need to gush about it either. As for installation, I would not say it was difficult, but whoever said 10 minutes needs a new watch. It took about a half hour with some effort to ratchet the mostly unthreaded bolts through the under-sized nuts, and the cheap wrench provided (about the thickness of two layers of tin foil) was useless. Note to manufacturer, save yourself some money and just skip the wrench. With all that said, it's sturdy, solid, and a good size. Again, it's a pull up bar and this one will work if you do.

Scritto da: Kersi Von Zerububbel

Solid. No wobble. No wiggle. No rocking. Just basic, solid pull-up bar.

My garage does not have 2x6 joists but 2x4 rafter ties. I had to install it on a 3x12 patio beam. Hopefully the grip tape I used will hold back the rust. I also painted joints to give more rust protection. This is a SOLID, well-made product that is a good value. No rocking. No wobble.

Scritto da: AVe

Perfect garage pull up bar

This is great for open rafters in a garage. After replacing door frames and doors to white, I can no longer use a door jam pull-up bar because they leave black streaks or require holes drilled in the frame. This was a perfect option. 2-stars on the install, because you have to get in a ladder, measure, drill holes, and install nuts and bolts. That’s not a reason not to order this if you have a permanent spot picked out. This is solid, has different angles hand grips, and I am happy with my purchase.

Scritto da: Eli

Easy to install , solid contruction.

Just installed it and banged around. Im 5'9 160 lb. Its sturdy enough for pull ups chin ups and hanging leg lifts. The hardware provided was more than adequete. My floor joists are old so they really are 2 inches thick. For modern housing or a bigger person id use fender washers, or coorisponding strapping between the bolts. Cant beat the price for the quality. Solidly built with a comfortable grip.

Scritto da: JV

Great pull up bar!

I'm very happy with this pull up bar. I hung it on a joist in my garage and it's been holding up great. The bar is not textured so you'll have to add your own grip to it. I prefer it smooth so this is not an issue for me.

Scritto da: Chris

Worth the money

Great pull-up bar, I really enjoy the Chinup grip on this one. I used to prefer doing pullups rather than Chinups, but the ergonomic grip feels very comfortable. I suffered a shoulder injury and doing Chinups on this bar gives me very little shoulder discomfort. Very happy with the purchase.

Scritto da: ODoyleRules

Great quality, may need gloves to use it

Very nice product for unfinished basements. It was easy to mount myself. I used a smaller drill bit than they require since I did not have the correct one and just drilled it out a little more. I then used a hammer to push through the bolts. The bar doesn't move at all. I wish there was a better grip option, the bar is slippery without gloves one.

Scritto da: Michael Dafoe

Very Good

My son loves it!!

Scritto da: CNNC

Five Stars

Great product.