Wilderness Systems Kit di cablaggio passascafo per kayak

Name: Wilderness Systems Kit di cablaggio passascafo per kayak
Brand: Wilderness Systems
SKU: 0729282086426
Price: 57.74 EUR
Availability: InStock

Brand:Wilderness Systems

3.7/5

€
57.74

I kayak moderni sono spesso dotati di elettronica che produce fili indisciplinati. Ora puoi prendere il controllo del disordine con il kit di cablaggio passascafo, che ti fornisce tutto il necessario per instradare facilmente i cavi da una batteria o altri dispositivi elettronici da un portello o pod attraverso lo scafo del tuo kayak. I raccordi resistenti all'acqua impediscono l'allagamento.

Quantity

Aggiungi al carrello Compra subito

EAN: 0729282086426

Categories: Sport e tempo libero, Sport e forma fisica, Kayak, Ferramenta per kayak,

Progettato per una vestibilità resistente all'acqua su cavi fino a 5/16 di pollice. Richiede un foro da 1-3/8 di pollice per l'installazione, gestisce scafi fino a 1/2 pollice di spessore. Compatibile con la batteria al litio, la maggior parte delle altre batterie e il kit di installazione del fish finder. 2 raccordi resistenti all'acqua con 6 diverse dimensioni di raccordo da 1/8 di pollice a 5/16 di pollice. Previene impigliamenti e inciampi. Riduce l'ingombro consentendo di nascondere i cavi all'interno dello scafo.

Brand	Wilderness Systems
Brand Name	‎Wilderness Systems
Color	‎Gray
Customer Reviews	4.7 4.7 out of 5 stars 494 ratings 4.7 out of 5 stars
Included Components	‎Wiring Kit
Item Dimensions LxWxH	‎3.5 x 2.5 x 1.5 inches
Item Dimensions LxWxH	3.5 x 2.5 x 1.5 inches
Item Package Dimensions L x W x H	‎5.55 x 4.21 x 2.44 inches
Item Weight	0.35 Pounds
Item Weight	‎0.35 Pounds
Manufacturer	‎Confluence Kayaks
Material	‎Plastic
Model Name	Wilderness Systems
Model Name	‎Wilderness Systems
Number of Items	‎1
Package Weight	‎0.19 Kilograms
Part Number	‎8070061
Power Source	Battery Powered
Size	‎One Size
Sport Type	‎Kayaking
Suggested Users	‎Unisex-adult
Warranty Description	‎1 Year Warrranty

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Rob A.

Worked Great

Was worried about the size of the 1-3/8" hole required, but turned out not be be an issue when attempting to find a spot to drill on my Sportsman 120 PDL. Adaptors provided allow for the single wire transducer penetration as well as the 2-hole power/transducer connection to the Helix 7 head unit. Easy install. Worked great.

Scritto da: David A.

Great product

They are easy to install. The directions are simple and informative. They seal up great! I had no water issue great product!

Scritto da: Jason Y

Perfect for Helix 10!

This was a great kit and just what I was looking for to install fish finder wires through my kayak. I will say, it's a little scary to drill not 1, but 2 large holes in a $2,000+ water vehicle, but I just held my breath, ignored the sense of impending doom, and went for it! Make sure you have the right size hole saw or forstner bit (I think it called for 1 and 3/8"), but other than that the process is pretty seamless. Included in the kit are various sizes to fit different fish finder wires. The fit was snug for the power cable and transducer wire for a Humminbird Helix 10. One tip that may be obvious is to make sure you put the holes in a place on the kayak where you can have access to the back side of the hole. The attachments are held in place with a screw on system and I could barely reach the area needed through the hatch. Good luck!

Scritto da: Cheap ass

It worked

The product worked. If you want to add a depth finder its probably the best way to do it. 1-3/8 hole saw a must, not a sloppy spade bit. Do your research on YouTube before you drill any holes. Placement of the holes are important to ones own liking. When drilling holes look at where you want the hole and focus on the backside where the nut gos make sure it will not foul an inside corner, after installing the hole saw into the drill, look at it when you pull the trigger to make sure its spinning true. Drill the holes as low as you can get them, so if the Kayak flips they will be above the waterline upside down. You are on your own from here, today Kayaks are not cheap. Old Town PDL 2020 Predator, good luck!

Scritto da: Scott

A pretty good plastic cgb

I installed a helix 8 on my old town Predator and used the through hole kit to make a neat and professional looking installation. This kit has a broad range of gland sizes to accommodate most any size of electronic equipment cable, if anything I think Wilderness Outdoors makes their glands a little bigger than they need to. Maybe it’s needed when connecting multiple units together but for kayak applications # 3 and #2 glands are what you will use. When a gland is properly installed you should not be able to pull the cable through it once the lock nut is tight, if the cable still a little loose put a wrap or two of super 88 on the cable where it passes through the gland to enlarge the cable to get a tighter fit. Other than that this is a solid product.

Scritto da: Amazon Customer

Makes for professional installation!

Perfect for electronics install on a kayak. Final look is factory perfect.

Scritto da: Amazon Customer

1 and 3/8 in hole

First of all.... I've had 0 water in my hull after 5 or 6 uses of my kayak post installation. Be warned, you have to drill a 1 3/8 inch hole for the kit. I used a spade bit, and it was a little messy at that size of hole. I tried to find a hole saw at that diameter and was unsuccessful. I know they exist but I needed to install quickly and my local lowes did not have that size. I'm not sure what the best way to drill the holes is, but I made it work with a cheap spade bit. The rubber washer helps seal the hole up, and like I said... no water. The fittings aren't "super tight" with the transducer and battery wires for my humminbird helix 5, but are tight enough. Installed on my old town topwater pdl in about 10 minutes wiring and all. I purchased these because the hobie kit wasn't a prime option but the holes on the hobie kit are smaller which would have been more convenient.

Scritto da: John Hubbard

Works good does what I needed it for

Used it for depthfinder cables . Makes a neat looking job

Scritto da: Blueowlbc

Easy install

Overall very easy install, although drilling holes in an expensive kayak was hard to do. But I drilled the two holes in my Old Town Sports 120pdl. All went well, only complain was the single hole fillers where a little bigger for my fish finder cable, where the 2 hole fillers were snug. Haven't had it on water yet, but hoping all goes well with no water entering

Scritto da: Moore Family

Exactly what I was looking for.

I purchased this to clean up the wiring on my kayak for my fish finder. Easily installs in minutes when you have the proper tools. Keep in mind, before you drill your hole, that you must be able to reach the backside of the bulkhead to install a nut.

Scritto da: KC Kayak Fishing

Quality kit but.....

Used this kit on both of my old town sportsman pdl 120s, quality kit the materials used far exceeded my expectations. It is a bit loose fitting around the garmin striker 4 plus wires, would like to see a couple more grommets included with the kit as the striker 4 series of fishfinders are a popular choice for kayak anglers. A little bit of silicone fixed that issue. Make sure you have access to the inside of your boat as this kit is a threaded two piece kit!

Scritto da: al

Excellent product , well thought out

Product was easy to use installing a fishfinder on a kayak. Was easy to use and install.

Scritto da: Amazon Customer

Sealed my wires, really well

Product arrived and used as shown.