Valvola a sfera SharkBite da 1/2 pollice, raccordo idraulico in ottone a spinta per collegare, chiusura acqua, tubo PEX, rame, CPVC, PE-RT, HDPE, 22222-0000LFA valvola da 1/2 pollice

Brand:SharkBite

3.8/5

44.70

DESCRIZIONE PRODOTTO Valvola a sfera da 1/2 pollice SharkBite SharkBite utilizza ottone di alta qualità per la nostra valvola a sfera push-to-connect in ottone da 1/2 x 1/2 con una singola maniglia della valvola a sfera. La valvola a sfera a passaggio totale consente all'acqua di passare attraverso la valvola facilmente e liberamente, con l'affidabile opzione per interrompere rapidamente l'alimentazione idrica! TAGLIO. SPINGERE. FATTO. Il sistema di connessione SharkBite rende qualsiasi progetto idraulico facile e veloce grazie alla nostra esclusiva tecnologia push-to-connect. Quando inserisci un tubo nei raccordi a connessione rapida SharkBite, i denti in acciaio inossidabile mordono e afferrano il tubo, mentre l'O-ring appositamente formulato si comprime per creare la perfetta tenuta stagna. Nessuna saldatura, nessun morsetto, nessuna colla. DAL PRODUTTORE SharkBite è il sistema di connessione push-fit che sta davvero prendendo piede. È il modo più semplice per unire tubi in rame, CPVC o PEX in qualsiasi combinazione, senza saldature, fascette, unioni o colla. Basta inserire il tubo e i denti in acciaio inossidabile mordono e si aggrappano saldamente, mentre un O-ring appositamente formulato si comprime per creare una tenuta perfetta. Lo smontaggio è altrettanto veloce utilizzando il semplice strumento di disconnessione. Così raccordi e valvole possono essere facilmente cambiati e riutilizzati. Possono anche essere ruotati dopo il montaggio per facilitare l'installazione in spazi ristretti. Ottieni SharkBite e controlla il tuo prossimo progetto idraulico. Questi raccordi sono senza piombo e soddisfano tutti i requisiti per l'impianto idraulico in California e Vermont.

Prodotto non disponibile
PREFERITO DAI PROFESSIONISTI: tutti i raccordi SharkBite soddisfano gli stessi standard per le applicazioni idrauliche commerciali e residenziali. QUALITÀ: solo la qualità e le prestazioni di SharkBite sono comprovate sul campo. PRESTAZIONI: le valvole di intercettazione SharkBite sono resistenti e certificate per sostenere una pressione di 200 PSI e 200 gradi Fahrenheit. VERSATILE: i raccordi idraulici della valvola a sfera Shark Bite si adattano a tubi in rame, PEX, CPVC, PE-RT e HDPE e li collegano in qualsiasi combinazione. Si installa in pochi secondi: la valvola dell'acqua a sfera da 1/2 pollice non richiede attrezzi speciali, nessuna saldatura, nessuna piegatura o colla; il design push-to-connect fornisce un'applicazione efficiente che consente di risparmiare tempo e denaro; basta spingere per creare una tenuta stagna.
Batteries Included? ‎No
Batteries Required? ‎No
Brand SharkBite
Brand ‎SharkBite
Color ‎Brass
Country of Origin ‎China
Customer Reviews 4.8 4.8 out of 5 stars 4,616 ratings 4.8 out of 5 stars
Exterior Finish Brass
Exterior Finish ‎Brass
Finish ‎Brass
Included Components ‎Ball Valve
Inlet Connection Type Cross Linked Polyethylene
Inlet Connection Type ‎Cross Linked Polyethylene
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 1.3 x 2.3 x 5.4 inches
Item Dimensions LxWxH ‎1.3 x 2.3 x 5.4 inches
Item model number ‎22222-0000LFA
Item Package Quantity ‎1
Item Weight ‎6.7 ounces
Manufacturer ‎Cash Acme
Material Brass
Material ‎Brass
Number Of Pieces ‎1
Outlet Connection Size 0.5 Inches
Outlet Connection Size ‎0.5 Inches
Outlet Connection Type PEX
Outlet Connection Type ‎PEX
Part Number ‎22222-0000LFA
Product Dimensions ‎1.3 x 2.3 x 5.4 inches
Shape ‎Inline
Size ‎1/2 in.
Style ‎Valve
Warranty Description ‎Lifetime

3.8

13 Review
5 Star
86
4 Star
10
3 Star
2
2 Star
0
1 Star
1

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Mr. Dellbrook
First time using a push on ball valve
I added a shut off to the hot water exit pipe from the existing hot water heater. I did not want to do a solder joint because trying to rid all the dripping water from soldering process is a pain. For the 3/4 ball valve, I removed a 1-5/16" section of the existing copper pipe to insert the new push on fitting valve. With water turned back on....no joint leak!
Scritto da: meoff
NO MORE SWEATING
Had doubts at first but after reading reviews I replaced one outside valve and have to say that this is the best thing to come along since toilet paper!
Scritto da: Susan
Great product
Love the shark bite connectors.
Scritto da: Richard
You can do it!
No special skills needed. Pipe cutter or hacksaw and sandpaper. Clean off paint or corrosion. Cut out old valve. Push to connect new valve. Save a fortune.
Scritto da: mongoose
Works great
No leaks, easy push on install. Can’t ask for more.
Scritto da: james m.
Check size
Works well
Scritto da: Clinton A.
Can't beat a shark bite.
This was an easy install to replace an old shut off valve
Scritto da: fatty
Works Great!
Used this as a main water shut off to my house. It's operation is very smooth. The reason I used this shark bite valve is that it is easy to remove and replace if need be. The one I had installed years ago has lead in it which I just found out, and is not for potable water. Since it's well water and I have RO drinking water, I was not drinking the water but wanted to remove the valve for obvious reasons. This terrific valve will make future replacements a breeze without cutting pipes. I also used the fitting that converts from PVC to CPVC from well to house.
Scritto da: Amazon Customer
Easy install, does what it should.
Easy to install and works as it should. Well designed and quality manufacturing .
Scritto da: alcar
Shut the front tap!
I've been meaning (for 8 years now) to run a water line from our house into our attached garage. The main reason was for our fridge ice maker but I also wanted a hose access for those winter months. I finally decided to tackle the project. These are simply amazing. So easy to use and super fast. Once you prep your line properly, you simply push the line in the fitting, make sure it's seated all the way and Done! No more soldering. These are amazing especially for close quarters. Even if you mess up, you can simply remove them and fix your error. I have this one at the end of a temporary line that will go out the side of the garage this summer for an outside hose. (all the way to right of image) It's acting as cap right now but will be used to shut off the outside water during the winter months. Overall, these are a lifesaver. I know many people say these type of fittings don't last but I've seen homes that have had them for years with no leaks. I took a chance with these and I'm confident they will last a long time (hopefully forever). I highly recommend these especially if plumbing is not your thing. Pros: Super easy to install reusable solid, no leaks full brass fitting Cons: costly compared to normal fittings can only re-use so many times
Scritto da: Amazon Customer
unit easy to install
works like they say
Scritto da: J.R.
Easy to install
Wow, I am impressed at how easy this was to install on an existing line. And I have the coordination and manual dexterity of a 2-year-old. I wanted to put a shut off valve to the waterline feeding my outside faucet and prevent the line from freezing over during the winter. This works very well. Just push the line into the valve (with some force) until it no longer goes further in, do the same for the other side, you're done... well, clean the floor from some water dripping because you did not put a towel to catch it, and you're done! I would NOT have paid full price for this, but the discounted price made it a great purchase
Scritto da: ali a.
Easy to install
Good one

Prodotti correlati

hot

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart