Testa della pompa per bicicletta SKS EVA, nera, adatta a tubi con diametro interno di 5,0-5,7 mm

Name: Testa della pompa per bicicletta SKS EVA, nera, adatta a tubi con diametro interno di 5,0-5,7 mm
Brand: SKS GERMANY
SKU: 4002556238018
Price: 37.56 EUR
Availability: InStock

Brand:SKS GERMANY

3/5

€
37.56

La testa della pompa da pavimento per biciclette EVA viene offerta in sostituzione di SKS e altre pompe con un diametro interno del tubo flessibile di 5,0-5,7 mm. La testa funziona con valvole schrader, presta e dunlop in 1 foro.

Quantity

Aggiungi al carrello Compra subito

EAN: 4002556238018

Categories: Sport e tempo libero, Sport e forma fisica, Ciclismo, Accessori, Pompe per bicicletta, Pompe da pavimento,

Adatto a tubi della pompa con un diametro interno di 5,0-5,7 mm.

Brand	SKS GERMANY
Brand	‎SKS GERMANY
Brand Name	‎SKS GERMANY
Color	Black
Color	‎Black
Customer Reviews	3.9 3.9 out of 5 stars 125 ratings 3.9 out of 5 stars
Included Components	‎Pump Head
Item Dimensions LxWxH	4 x 4 x 1 inches
Item Dimensions LxWxH	‎4 x 4 x 1 inches
Item Package Dimensions L x W x H	‎5.12 x 3.94 x 1.02 inches
Item Weight	0.13 Pounds
Item Weight	‎0.13 Pounds
Manufacturer	‎SKS-Germany
Material	Plastic
Material	‎Plastic
Model Name	‎SKS EVA Bicycle Pump Head
Number of Items	‎1
Package Weight	‎0.06 Kilograms
Part Number	‎8930
Power Source	‎Corded Electric
Size	‎Fits hoses with 5.0-5.7mm inner diameter
Suggested Users	‎Unisex - Cycling
Warranty Description	‎5 year warranty

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: James M Knock

German Design and Quaity

My old pump head simply wore out. It wouldn't seal well. I bought a different kind that was generic. I had to discard it. The hose on my pump has an unusually thick wall. It has a large O.D. and the inner diameter is small. I put some grease on the hose and the fittings and managed to assemble it with a bit of effort. It works perfectly. I pump my tires to 120 psi and when I release the lever it pops off quickly, letting out very little air from my Schrader valves.

Scritto da: SKC

Just What I needed

The other pump head was threaded and some how the threads got stripped. This new clamp on pump head solved that problem. It was a bit hard to put on the hose; but I finally managed by sticking a medium sized Phillips head screw driver into the hose and then I heated um the hose just a little to stretch it. Put a lubricant on the part of the pump head where the hose goes and finally was able to install the pumb head onto the hose. It worked very well and I was able to pump up my tires again. Yes I would recommend this product

Scritto da: marvin

Same bicycle pump that the bike shop sells for a lower cost

I needed a new bike pump and checked out the brand that my local bike shop sells. It is the SKS Eva pump as shown on the Amazon site, but the bike shop's price was higher. I bought it from Amazon, and it works great. It takes little effort to pump the bike tires to 80 lbs, and the gauge is accurate. The hose connects and disconnects from the tube easily, and with the included accessories I can inflate balls.

Scritto da: Chorizo1

Flimsy handle

Handle is prone to break.

Scritto da: euclid

Good quality replacement head

Bought to replace the broken stock head on my Joe Blow pump. Works great, holds valve stem securely and doesn't leak. Installs easily with no tools. Subtracting one star because the lever snaps open with a bit of force when removing from valve stem and it hurts a bit if your finger is in the way.

Scritto da: Robert Minnicks

Bike pump Head

Used this on my bike pump, grasps presta. valve and hold well.

Scritto da: franko

As described for Schraeder and Presta use.

If floor pump valve is broken and/or cannot keep a seal, this is a cheap replacement to put extra miles on your pump.

Scritto da: Damun Gracenin

Not very good

Does not seal well. Had to fiddle with it to get the cam and valve stem push nub lined up. Hard to snap on. Lets a few pounds of air out of tire upon removal.

Scritto da: NV

SKS EVA Bicycle Pump Head required trial and error to figure out Schrader

i replaced the pump head on a Schwinn Airdriver 1100 floor pump. To attach this pump head you unscrew the orange section which you place over the hose. Pressure fit the hose over the nipple, then screw the orange part back on. The orange section may be very tight so you might have to use pliers with something to protect the plastic. You can inflate Presta valves with the silver part fully tightened. When inflating Schrader valves, you loosen the silver part very slightly (about the width of the end of your thumb , nail to pad @ 5mm). Then it is trial and error to see if it will stay on. You need to adjust so it is not too loose or until the pressure doesn't force it off. Once you find the sweet spot, it works very well. Disappointed, the silver head wasn't just something you flip around, one side for Presta and one side for Schrader. Other than that, it does work quite well for Presta and Schrader valves.

Scritto da: Peter from Toronto

Does not seal well on Presta. Hole diameter too large.

I bought this to use on by bicycles that have Presta valves. Presta valves have a smaller diameter than Schrader valves found on cars and motorcycles. To try and fit both valves this pump head's hole diameter is too large to seal well. It tips too much and leaks. They should make two versions of this design. One properly sized for Presta Valves, and one properly sized for Schrader valves. I ended up buying a new Lezyne head. It will not last long because it has too many o-rings and moving parts, but while it works, it will work well and be easy to use. A product first has to work well. Then it would be nice if it was easy to use and reliable. A properly sized version of the SKS EVA for a Presta only might have worked. This does not. It cost me $30 to find out.

Scritto da: Ian Shaw

Didn't really work on Presta

I couldn't get PSI over 60 on a standard bike tire with the Presta valve. The head wouldn't make a good seal so air would continually escape so I had to pump very quickly and disconnect fast to save any air in the tire. I bought an inexpensive pump for $40 at Canadian Tire and solved the problem.

Scritto da: Amazon Customer

Work very well on a lezyne for presta valve.

Fit well on lezyne pump. For very well for presta valve. You can change the interface diameter with the nut. If the handle is a little to stiff to swap 90 degree, just uncrew a little.

Scritto da: Mario

falso

en la descripcion dice que se adapta a multiples valvulas, no es as'i ,tengo una bicicleta de montaña, entra pero no se adapta al pibote , deberin especificar para que tipo de valvula es