Prime-Line M 6086 Paraspruzzi per vasca da bagno, 9 pollici x 10-3/4 pollici, plastica, bianco

Name: Prime-Line M 6086 Paraspruzzi per vasca da bagno, 9 pollici x 10-3/4 pollici, plastica, bianco
Brand: PRIME-LINE
SKU: 0049793060860
Price: 33.32 EUR
Availability: InStock

Brand:PRIME-LINE

3/5

€
33.32

DESCRIZIONE DEL PRODOTTO Questi paraspruzzi per vasca da bagno bianchi sono realizzati in plastica rigida e includono un angolo sinistro e uno destro. Ogni pezzo presenta un'ala che devia l'acqua che curva di 2-3/8 pollici verso la vasca, progettata per reindirizzare il flusso dell'acqua in eccesso nella vasca. Questi paraspruzzi rigidi, non regolabili e ad angolo sono dotati di un angolo di 90 gradi, progettati per installazioni angolari strette. Questi paraspruzzi si installano al meglio con un prodotto adesivo a base di silicone trasparente o bianco, ma le superfici delle pareti e della vasca devono essere pulite prima con alcool per fornire un legame pulito e permanente. L'adesivo siliconico non è fornito con questo articolo e deve essere acquistato separatamente. L'applicazione degli adesivi siliconici deve essere seguita secondo le istruzioni del produttore. *Suggerimento per l'installazione: una volta che le superfici sono state pulite e i paraspruzzi sono stati fissati in posizione con silicone, attendere 24 ore per l'indurimento prima di esporli all'umidità. DAL PRODUTTORE Questi paraspruzzi sono realizzati in plastica bianca. Presentano un design a bordo curvo e includono 1 protezione per la mano sinistra e 1 destra. Per l'installazione si consiglia un mastice o un mastice adesivo.

Quantity

Aggiungi al carrello Compra subito

EAN: 0049793060860

Categories: Casa e cucina, Bagno, Accessori da bagno, Accessori per la doccia, Portaoggetti da doccia,

Costruzione in plastica rigida; non regolabile. Di colore bianco. 7/16 pollici x 9 pollici x 10-3/4 pollici Questi paraspruzzi sono progettati per reindirizzare il flusso dell'acqua in eccesso nella vasca. Attendere un tempo adeguato affinché il sigillante siliconico si indurisca prima di utilizzare la vasca e la cabina doccia Include un paraspruzzi direzionale destro e uno sinistro. Pulire accuratamente l'area di montaggio prima dell'installazione. Si adatta alla maggior parte delle coperture per vasca e vasca. Questi non sono regolabili. Il design curvo devia l'acqua nella vasca e nella cabina doccia. Sarà necessario utilizzare sigillante siliconico per installare correttamente (non incluso). Paraspruzzi in plastica bianca per vasca e vasca da bagno (7/16 pollici di spessore x 9 pollici di larghezza e 10-3/4 pollici di altezza).

Batteries Included?	‎No
Batteries Required?	‎No
Brand	PRIME-LINE
Brand	‎PRIME-LINE
Color	White
Color	‎White
Country of Origin	‎China
Customer Reviews	4.0 4.0 out of 5 stars 2,287 ratings 4.0 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎White
Finish Type	White
Finish Type	‎White
Included Components	‎Splash Guard
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎M 6086
Item Package Quantity	‎1
Item Weight	0.01 Ounces
Item Weight	‎0.01 Ounces
Manufacturer	‎Prime-Line Products
Material	Plastic
Material	‎Plastic
Mounting Type	Mounting
Mounting Type	‎Mounting
Number of Items	‎1
Package Type	‎Standard Packaging
Part Number	‎M6086
Product Dimensions	9"D x 10375"W x 1.25"H
Product Dimensions	‎9 x 10375 x 1.25 inches
Product Dimensions	‎9"D x 10375"W x 1.25"H
Special Feature	Adjustable
Special Feature	‎Adjustable
Special Features	‎Adjustable
Unit Count	1.0 Count
Unit Count	‎1.0 Count
Usage	Showers
Usage	‎Showers
Warranty Description	‎Goods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: xochncarlos

Great for price!

I used silicone caulk to seal to tub and is working great, i think that is what people have problems with, its not a real easy fix but is worth it if you take your time and do it right which really didnt take much time at all!

Scritto da: SHAWNA HANEY

Just what my tub needed

Works great for redirecting the water back into the tub and not on the floor. Only issue is it doesn’t come with a way to attach it to tub. So make sure you have caulking to adhere it to tub.

Scritto da: NTD

Misrepresented

Mostly my fault, but it doesn't fit square. End up using a lot of caulking. It came with no adhesive. It should be rubber or at least be playable. Not a great product.

Scritto da: DZ

Install pro tip

I'm seeing many complaints that these do not fit properly. This product is 90 degrees. If your mounting surface is not 90 degrees, that is not a defect in this product. To get around this, dry fit the barrier to your tub, then trace a light line on one side. If it does not contact the wall and tub, lean it inward until it does. Find the sweet spot, then make your mark. Apply a generous bead of silicone to the mating edge of the barrier, then set on your line. Once it cures apply another bead of silicone to both sides for added strength. I accidentally kicked mine getting in the shower and it held just fine.

Scritto da: Tim Paisley

Kinda bigger than i thought

May be a bit of a trip hazard. Something smaller might do the trick, keeping the floor dry without having to navigate into the shower like a boat in a channel. I bought them for the curved design that pushes the water back into the shower, instead of having it just run around the end, and onto the floor near the middle of the shower instead of at the corners. The curved design seems to work.

Scritto da: tankforwin

Install with silicone

Very easy to install. I use some white silicone and it adhered very nicely to my tub. Now the water doesn't get on the floor and ruin the baseboards anymore.

Scritto da: ESTex

Doesn’t come with anything to affix to tub

Good price and product seems ok. Did not realize it didn’t come with something to adhere it to the tub.

Scritto da: Fatima

Returned

Returned because it didn't come with adhesive,

Scritto da: Jennifer

They are perfect

These did not come with adhesive of any kind but they are excellent. I used caulking. Worked great.

Scritto da: Suzie

get one, they fix the shower splashes...!

I had a real problem with water splashing down the side of the bath when showering, this little gadget has solved the problem..!

Scritto da: Tom

Fantastic splash guard that actually works

Fantastic splash guard that actually works. Uses high quality plastics (feels thick and durable in hand), and is sizeable enough to effectively block water from splashing out of the tub. The curved edge also helps keep water in and flow back into the tub, rather than letting water go around it and off the side. I was aware that this doesn't come with an adhesive, thanks to a previous review, and used the same caulk mentioned in that review. It's provided a very secure, water proof adhesion to the tub wall and side. While some may see the lack of an included adhesive a drawback, I actually don't mind. I had previously purchased different set of splash guards from Home Depot which included a thick double sided tape on the splash guard. Such adhesives are not water tight though, and the water was able to get through the porous double sided tape. Overall very happy with this product - when properly solved, it does a great job of stopping leaks off the side of your tub

Scritto da: HiliRu

Works perfectly

No silicone glue is provided, you have to buy it and glue it yourself.

Scritto da: Stacie F

Recommended product to prevent water damage

We decided to order this instead of the smaller ones that were found locally. These are much sturdier and we liked that they were curved to redirect the water. These are quite large, however, that outweighed the water damage that we had due to kids splashing the floor and walls. They are made of a thick, plastic material. These do not come with instructions or adhesive. We have found, in the past, the ones with adhesive/tape, eventually come loose. To install these, we used a small amount of silicone caulking on the surface of the plastic and then caulking the edges to create a straight finished edge. After a few showers, they have held up very well. A few notes: -these have a significant curve and will need a tub/surface with the space to allow the curve -they are a little more difficult to install if your wall/tub is not square. We had to use extra caulking to fill in the gap. -there are no hooks on this style to clip in the shower curtain. A recommended product - we have ordered another set for our main bathroom.