CAP Barbell A-Frame Porta pesi per manubri, Color Series Carbon

Brand:CAP Barbell

3.5/5

106.33

Dimensioni articolo: 14,4" di lunghezza x 12,8" di larghezza x 26" di altezza. Fiducia - Esperienza di fiducia; CAP è un pioniere nel settore del fitness da oltre 30 anni con sedi in tutto il mondo; È probabile che, se ti sei mai allenato prima di aver utilizzato un prodotto CAP. Specifiche: il rack pesa 10,5 libbre; 30 giorni di garanzia del produttore; Assemblaggio richiesto; Include solo rack. Durevole e affidabile - Rifinito con un resistente rivestimento in polvere e costruito con tubi in acciaio, questo rack può contenere in modo sicuro fino a 200 libbre di manubri. Design salvaspazio - Il design del telaio in carbonio di questo rack massimizza lo spazio sul pavimento riponendo i manubri a forma di "A" o in verticale; Accedi e riponi facilmente i manubri. Contiene 200 libbre - Progettato per contenere 5 paia di manubri esagonali con cappuccio o esagonali in gomma che vanno da 5 a 25 libbre; Mescola e abbina i tuoi manubri per adattarli a questo rack, fino a 35 libbre di coppia; Alcune combinazioni potrebbero non adattarsi.

Prodotto non disponibile
Dimensioni articolo: 14,4" di lunghezza x 12,8" di larghezza x 26" di altezza. Fiducia - Esperienza di fiducia; CAP è un pioniere nel settore del fitness da oltre 30 anni con sedi in tutto il mondo; È probabile che, se ti sei mai allenato prima di aver utilizzato un prodotto CAP. Specifiche: il rack pesa 10,5 libbre; 30 giorni di garanzia del produttore; Assemblaggio richiesto; Include solo rack. Durevole e affidabile - Rifinito con un resistente rivestimento in polvere e costruito con tubi in acciaio, questo rack può contenere in modo sicuro fino a 200 libbre di manubri. Design salvaspazio - Il design del telaio in carbonio di questo rack massimizza lo spazio sul pavimento riponendo i manubri a forma di "A" o in verticale; Accedi e riponi facilmente i manubri. Contiene 200 libbre - Progettato per contenere 5 paia di manubri esagonali con cappuccio o esagonali in gomma che vanno da 5 a 25 libbre; Mescola e abbina i tuoi manubri per adattarli a questo rack, fino a 35 libbre di coppia; Alcune combinazioni potrebbero non adattarsi.
Brand CAP Barbell
Brand ‎CAP Barbell
Brand Name ‎CAP Barbell
Color ‎Carbon
Customer Reviews 4.5 4.5 out of 5 stars 11,893 ratings 4.5 out of 5 stars
Frame Type ‎A-Frame
Included Components ‎Dumbbell Rack
Item Dimensions LxWxH 27 x 6 x 6 inches
Item Dimensions LxWxH ‎27 x 6 x 6 inches
Item Package Dimensions L x W x H ‎26.5 x 5.7 x 5.12 inches
Item Weight 11 Pounds
Item Weight ‎11 Pounds
Manufacturer ‎Cap Barbell, Inc.
Material Alloy Steel
Material ‎Alloy Steel
Model Name ‎RK-12BIS
Number of Items ‎1
Number of Racks ‎1
Package Weight ‎5.2 Kilograms
Part Number ‎RK-12BIS
Product Dimensions ‎12.8"D x 14.37"W x 25.98"H
Sport Type ‎Exercise & Fitness
Style A-Frame Dumbbell Rack Color Series
Style ‎A-Frame Dumbbell Rack Color Series
Suggested Users ‎unisex-adult
Warranty Description ‎30 days
Weight Limit ‎200 Pounds

3.5

13 Review
5 Star
73
4 Star
14
3 Star
6
2 Star
2
1 Star
4

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: A. Prassas
Pretty easy to assemble
I read a bunch of reviews before buying this and some warned that it was hard to put together. I’m not super handy but I found it pretty simple. I put the screws and nuts in by hand, then went back through and tightened them all using the tool they provided and a wrench to hold the nuts in place. Took about 15 mins. The instruction booklet said you need a socket wrench but I didn’t have one and it was fine. See photos. Holds my weights (2 to 8 lbs) and I like that there’s room to put larger weights as I buy them. Good price and I like it comes in colors other than black.
Scritto da: Brikks
A Rack.
Can you believe it!? This rack was in a box, from Amazon!! I built it... MYSELF!! It does NOT come assembled. That's ok, it's really easy to put together. Grab an extra wrench ???? because the included Alan Key will not do the job alone. Now, I should have read the weight limit, but that's on me to work out. It holds up to 200 lbs. I have a set of 30's and 40's on it already. I'll probably add 15's lastly and that'll be maxed out. Other than that, it's great. Holds my dumbells and looks nice doing it.
Scritto da: Torbjorn brumley
Great!
I read some reviews that said the stand smelled, but that wasn’t the case for me at all! I’ve had this for over a year now and it saves me so much room in my workout room and is super sturdy. Would recommend!
Scritto da: Forrest Edward Hooker
Sort of works for adjustables, probably absolutely works for standard fixed dumbbells
DISCLAIMER: My review does NOT reflect me using the stand for weights it was not designed for - it reflects the overall quality and finish of the stand itself. I bought this to get some adjustable dumbbells off the floor - this isn't really what the thing was designed for, and I knew that going in, but I figured if I could get at least 2 sets off the ground I'd be happy. Off the bat, the parts themselves were mostly solid. Minor surface rust on one of the bases and a minor bend in the bottom cross bar. Nothing worth sending the thing back for me. Assembly was easy - I used a 13mm wrench and the provided Allen key to torque everything down. At least one of the bolts seemed to have some paint build-up that made it hard for the key to grab, but some massaging got it in. I couldn't get the top connector flush but didn't spend much time trying to do so. Unit itself is sturdy minus the bends I mentioned earlier that cause it to wobble maybe a milimeter diagonally. I have no fears about this thing collapsing. AS FAR AS ADJUSTABLE WEIGHTS: You will most likely need to change up whatever setup you're using. See photo to get an idea of where I've placed them. The maximum plate size seems to be 10lbs for the bottom - anything stacked over that plate is fine as long as it doesn't exceed that size. In the middle, I was able to fit 5lb plates without collision, and up top, 2.5lb plates are the best you can do but they won't be completely snug. The minor inconvenience is I need to order more 5lb & 2.5lb plates, so bear that in mind. You can sort of stagger with larger plates, but you won't be fitting probably more than 5. Is it worth it buying this thing for adjustable dumbbells? If "Good Enough" is an acceptable conclusion for you, then yes. If not, look elsewhere. Overall, pretty solid stand. Probably something better out there for adjustables, but this worked for me just fine.
Scritto da: Amazon Customer
Great stand
This is a great dumbbell stand for the money. People wrote reviews that it was hard to out together or the instructions weren’t good but I put it together in less than 15 minutes and the instructions were fine.
Scritto da: AT
Great rack!
This has been easy to install and fits my Peloton weights perfectly. Seems really sturdy. Definitely looks,better than having weights all over :)
Scritto da: Amazon Reviewer
Like it a lot.
This is sturdy, easy to put together, and I liked the color choices. Some reviewers criticized the narrowness of the slots that hold the dumbbell handles, because it can pinch your fingers. But I was used to this as several gyms I've been to had racks that did the same thing, so I knew to watch for that. But for the price, I think this is a great rack. I do use lighter weights though (15 pounds) , so don't know how it will do for those who will put heavy dumbbells on it.
Scritto da: Charles W. Houseworth
Teriffic Rack for the Money
The rack is perfect for a five dumbell pair of 5s, 10s, 15s, 20s, and 25s. You will definitely need a one half inch hex socket and accompanying wrench to put it together. You or a nearby friend probably already have one. All pieces were in the kit, and fit together well. I put it together in about twenty minutes. I am very happy with this purchase.
Scritto da: Nadialula
SO HAPPY
For the longest time my weights were cluttered in the corner, but I am so happy, cause this looks so much better! I have one set of 25lb, 20lb, 15lb, 10lb, and 8lb and they fit perfectly. Stand is easy to assemble and feels sturdy.
Scritto da: D-Shopper
Good looking and solid - a little tight for larger dumbbells
Easy to assemble, solid once done. I have 30's, 25's and down from there on it. I don't think you could go much heavier with hex weights, they would touch each other or not fit.
Scritto da: Honey
Very sturdy dumbbell rack
Excellent quality and very sturdy rack. Will last you a lifetime. I took off one star as it’s a right old faff to assemble. You need a spanner as well as the Allan key which comes with it. It’s also quicker and easier with another pair of hands but I eventually got it together myself.
Scritto da: Yoshi
Perfect size, ideal for neoprene weights!
I’ve wanted one for ages, it’s perfect, sturdy, easy to assemble and I’ve managed to get 6x weights on there. It’s a great size, doesn’t take up too much floor space!
Scritto da: Nataleigh
Happy with the weight rack. Now just need to use the weights!
I’m happy with this rack - it’s easy to assemble, sturdy and looks great. The only complaint I have is they should have made the vertical spacing between the weights wides so that you’re not knocking off a weight on top when trying to reach one of your choosing.

Prodotti correlati

hot

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart