Blue Devil Skimmer Weir Sostituzione, Skimmer Weir per piscina - 8 pollici

Brand:Blue Devil

3.4/5

44.79

Mantenere pulita la tua piscina non è mai stato così facile con il cancello di ricambio Blue Devil Skimmer Weir! Questo sbarramento per piscina è stato progettato per essere un sostituto di qualità superiore per gli skimmer per piscina standard. Il Blue Devil Weir è una parte necessaria per il tuo sistema skimmer, mantenendo foglie, ramoscelli, insetti e altri detriti dalla superficie dell'acqua. L'acqua viene aspirata oltre l'ingresso del filtro e trattenuta in posizione dallo sbarramento mobile per trattenere i detriti indesiderati nello skimmer per la rimozione. Lo sbarramento impedisce inoltre all'aria spostata di entrare nel filtro e nel sistema di pompaggio mentre le persone nuotano, consentendo al sistema di funzionare correttamente. Il Blue Devil Skimmer Weir è così facile da installare! Tieni semplicemente il tuo nuovo sbarramento nello skimmer, tira il cavo verde per rilasciare i pioli di supporto e sei pronto per partire! Lo sbarramento misura 8 di larghezza, una dimensione ideale per diverse marche di skimmer da piscina.

DIMENSIONE FUNZIONALE: la dimensione del cancello largo 8 pollici si adatta a skimmer da piscina da 8 pollici. COSTRUZIONE DUREVOLE: la robusta struttura in plastica dura per anni di utilizzo. FACILE INSTALLAZIONE: tieni semplicemente lo sbarramento in posizione e tira il cavo per rilasciare i perni per un montaggio rapido e senza attrezzi. PROTEGGI IL SISTEMA DI POMPA E FILTRO: impedisce all'aria in eccesso di entrare nella pompa e nel sistema di filtraggio mentre le persone sono in piscina. MANTIENI PULITA LA TUA PISCINA: aiuta a sfiorare la superficie dell'acqua e a mantenere foglie, ramoscelli e altri detriti nello skimmer per la pulizia.
Brand Blue Devil
Color White
Country of Origin Mexico
Customer Reviews 4.3 4.3 out of 5 stars 228 ratings 4.3 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 8 x 5 x 1.3 inches
Item model number B8508
Item Weight 4.8 Ounces
Manufacturer Valterra Products, LLC
Material Plastic
Product Dimensions 8 x 5 x 1.3 inches
Style Above Ground

3.4

9 Review
5 Star
60
4 Star
22
3 Star
11
2 Star
2
1 Star
6

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: VA Beach
Working great for 5 years
I bought this in 2018 and now, in 2023, it's still working great. It's not really showing any signs of wear so I expect it to keep functioning quite a bit longer. I'm very happy with the purchase.
Scritto da: Billy Pilgrim
Perfect fit
The green cord was hard to pull out, but once it was in position, the gate worked great. Huge improvement in water velocity.
Scritto da: K. Batz
Great universal door- doesn't always stay
In previous ones, there was a blue wire to pull to install. This one had little metal pins to pull out once the door was in. The pin heads are small and smooth and can't be pulled out under water. They also pop out often and you have to hope you can find the spring piece. Wish they offered replacement parts.
Scritto da: nrebk
It works
Had to modify it a little to fit but works great
Scritto da: geoffrey johnson
Instructions are real lacking but the weir works fine
It works as a universal fits all per the opening, e.g. if you are replacing the factory fit 8.5in weir need to get an 8in an will have slightly smaller weir flap now. The reason 3 stars is instructions are way too brief unclear. It "installs"/attaches inside your skimmer using its tension rod not unlike shower curtain tension rods. The tension rod is "locked" by 2 pins that the "instructions" say "do not pull pins until installed" which is hard/impossible if you install it where it needs to be to work b/c you cannot get to the pins at that point. Note you will need pliers to pull the pins. What you need to do is insert the Weir into the skimmer and pull the pins while you can get to them, the tension rod will shoot out to the side walls of skimmer, and then slide the weir lower into position. I did mine from inside the pool. Also the weir is hollow and open ended on each side with Styrofoam block inside that I thought was packing material and removed, but actually the styrofoam is needed for the weir flap to work, so I got to install the weir twice ;) . Again instructions are not clear but just think of it as a tension rod system that simply needs to be released by pulling pins (need pliers for that) and simply slide it into the skimmer housing. BTW you can pull the pins before inserting the weir in the skimmer but need to make sure the tension rod at each end is pressed against something solid (pool decking in my case) so it doesnt shoot out and loose spring.
Scritto da: Knarfster
Super easy to install and a bargain
Way cheaper than a hayward part and super easy to install. It was the right size out of the box.
Scritto da: Rajmitch
Ignore the Directions
The directions said to "pull a string" to release the spring-loaded pins which hold it in place. Yet there is no string. What you really have to do is pull these metal pins out of the front (facing the pool) to release the spring. My suggestion is to pull one and then set it in place, then pull the second one out. Other than that, it does what it should.
Scritto da: Vegas Aardvark
Cheap gate
You get what you pay for, I replace this each year as it pops off. Works well, but it doesn’t last very long
Scritto da: Sparky
Works as it should
works as it should

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart