0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

Tamburo per barile di recupero Eagle da 20 galloni con coperchio con chiusura a leva con anello in metallo, altezza 21", diametro 21", HDPE soffiato, giallo, 1654

Brand:Eagle

3.7/5

€
341.77

Per decenni, la crescente selezione di fusti in plastica di Eagle ha soddisfatto l'esigenza di stoccaggio e trasporto sicuri di materiali solidi. Il fusto in plastica Eagle Blue da 20 galloni è realizzato in polietilene ad alta densità (HDPE) soffiato blu con inibitori UV, è durevole e leggero, resistente agli agenti atmosferici e agli agenti chimici e ha una chiusura con cinturino in metallo. Ideale per lo stoccaggio, la manipolazione e il trasporto sicuri di materiali pericolosi, il contenimento delle fuoriuscite, la pulizia di materiali pericolosi, il contenitore di spedizione originale, lo smaltimento dei rifiuti organici e l'incenerimento. I tamburi Eagle sono offerti in tre stili a testa aperta: confezioni da laboratorio, overpack e tamburi di recupero. I fusti sono disponibili in varie capacità con opzioni per colore, tipo di coperchio e tipo di chiusura e possono essere ordinati in quantità singole o su pallet.

Prodotto non disponibile

EAN: 0048441603084

Categories: Prodotti industriali e scientifici, Prodotti per la salute e la sicurezza sul lavoro, Movimentazione di materiali pericolosi, Attrezzature di stoccaggio pericolose, Batteria,

Soddisfa il regolamento DOT 173.3, HM-181 e gli standard UN relativi all'imballaggio e alla spedizione di materiali pericolosi; ha superato un test di tenuta di 3 psig. Ha una capacità di stoccaggio di 20 galloni; pesa 15 libbre; misura circa 21 di altezza e 21 di diametro. Dimensioni interne: 19 (48,3 cm) in alto x 16 5/16 (41,4 cm) in basso x 19 (48,3 cm) in altezza pollici. L'anello di bloccaggio a leva in metallo può essere utilizzato per fissare il coperchio al tamburo; la guarnizione in schiuma a celle chiuse aiuta a prevenire le perdite. Realizzato in HDPE giallo, che pesa meno dell'acciaio, è resistente a ammaccature, forature e alcuni prodotti chimici e può essere incenerito. Il fusto di recupero include un coperchio in plastica e può essere utilizzato per conservare, trasportare e smaltire piccoli contenitori di materiali pericolosi e aiutare a contenere le fuoriuscite.
Country of Origin USA
Domestic Shipping Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item model number 1654
Manufacturer Eagle Manufacturing
Product Dimensions 21 x 21 x 21 inches; 0.16 Ounces

3.7

5 Review
5 Star
82
4 Star
11
3 Star
3
2 Star
2
1 Star
2

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Johnnie N.
Works well with the Oneida Super Dust Deputy 4"
As noted in the headline, I bought this to use with the Oneida Super Dust Deputy 4" version. The bulging lid does not affect the fit for this unit since it has a wide flange with a lot of bolts. In short, this seems to work perfectly. The pictures above show how I drilled a center hole then made circles with a sharpie to see how the DD would fit. I used a small section of lightweight chain to make a compass to draw my inner circle at 7" from center (14" diameter). The outer circle was drawn with the DD laid on top just to see where the bolt flange would sit. The second picture shows the hole I cut with a jigsaw and the holes I drilled for the bolts. I drilled a hole and added a bolt finger tight then proceeded with more in a star pattern. Of course make sure that all of the holes will avoid the strengthening ribs inside the lid. The third picture is the finished fitted connection. I noted the hole in the front of the unit on the lid so it would be put back in the exact same orientation after removing it to install the gasket. I left it sitting overnight in case the new hole caused any flexing, but I doubt that was necessary. The last picture is the installation of the gasket before screwing it down wrench tight. After getting it back together the seal seems very good. I plan on using the old incense trick to look for any leaks but there is no way I will be globbing on a tube of silicone like I see in a lot of videos. I connected it to my 1HP ShopFox with a short section of flex hose and connected another flex hose with a vacuum fitting to suck up some various accidental and on-purpose dust spills. The Oneida and Eagle drum worked perfectly. My formerly empty collector bag and filter bag got a very small amount of dust. I am considering a direct exhaust outdoors at some point but right now I will cart around the hose and see how well my new toy (I mean personal protection device) works in my little shop. If anything does not work well or if I see any issues others that might help others I will update my review.
Scritto da: WayBetta
Perfect!
I paired this with a powertec 1 micron dust bag. I'm definitely pleased with my setup and product.
Scritto da: JT
Great Drum
Much drum, very large, so yellow, wow! seriously though, this drum is very durable and sturdy, comes with a great sealing top and a removable metal band. I use it for my dust collector, the top seals so well that I don't need to use the metal band.
Scritto da: JT_Woodcraft
Great dust collector barrel
Works great as a dust collector barrel. I have a one car garage and can’t afford for my dust collector to be on the ground and was very happy to find a barrel that is short and wide to allow me to mount my 2hp dust collector just below the ceiling and still be able to park my router table underneath. Lid works well but I recommend reinforcing it with plywood if you do use it for dust collection unless you have the super dust deputy 4 with the wide bottom mount. Lock ring holds firm yet removed easily enough for the weekly emptying. Only modification coming is a strip of lexan put on the side close to the top so I can view the dust level. Others have mentioned it being opaque but I can’t seem to get light to pass thru it.
Scritto da: Terrence Walsh
Great base for a Dust Deputy
Used as a base to mountThe Dust Deputy DIY Standalone Anti-Static Cyclone Separator . Worked perfectly. The lid is thick enough and has enough arch to stand up to the vacuum from either my Ridgid shop vac or Festool dust extractor. I had no problem with deforming or collapsing even when the pick-up hose clogged while the vacuum kept running. Construction notes: 1. The bottom of the Dust Deputy needs a 3-inch hole in the drum lid. With a lot of patience and care the hole could be cut with a sharp utility knife but the plastic is thick. A hole saw is the way to go. I usedMilwaukee 49-56-0173 3-Inch Ice Hardened Hole Saw mounted onDEWALT DW1803 Heavy Duty 7/16-Inch Shank Quick Change Mandrel (Fits Hole Saws 1-1/4-Inch - 6-Inch) . 2. For securing the Dust Deputy to the lid I used six 1/4-inch bolts and nuts, which worked fine. I also used washers on both sides and split washers with the nuts. 3. It helps to have gasketing between the Dust Deputy and the lid. I cut my own gasket from some shower pan sheet leftovers. That worked very well but took time. It would be quicker to use gasket-in-a-tube like an RTV sealant that is compatible with plastic, or a good caulk. This is the second time I've mounted a Dusty Deputy on a drum. This yellow drum was better than my previous effort. This drum is wider, thus more stable. It's a bit shorter so doesn't get in the way as much. The capacity is amazing. The lid did not need any plywood reinforcement. I like the handles, too. My previous Dust Deputy was mounted onEagle 1610MB Blue High Density Polyethylene Lab Pack Drum with Metal Lever-lock Lid, 14 gallon Capacity, 26.5" Height, 15" Diameter . That worked fine. The blue drum is narrower and gets through doorways more easily. The blue drum's lid needed reinforcement where the yellow drum's lid was already strong enough. The blue drum has no handles while the yellow drum's handles really help when it's time to empty it. I hope this helps someone who's trying to improve their dust collection.

Prodotti correlati

hot
Tamburo per barile di recupero Eagle da 20 galloni con coperchio con chiusura a leva con anello in metallo, altezza 21", diametro 21", HDPE soffiato, giallo, 1654
3.7/5

€ 341.77

Tamburo per barile di recupero Eagle da 20 galloni con coperchio con chiusura a leva con anello in metallo, altezza 21", diametro 21", HDPE soffiato, giallo, 1654
3.7/5

€ 341.77

hot
Eagle 14 galloni in polietilene ad alta densità Lab Pack barile tamburo con coperchio in metallo con chiusura a leva, altezza 26,5", diametro 15", blu, 1610MB
3.6/5

€ 246.67

Eagle 14 galloni in polietilene ad alta densità Lab Pack barile tamburo con coperchio in metallo con chiusura a leva, altezza 26,5", diametro 15", blu, 1610MB
3.6/5

€ 246.67

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu