Staffa di montaggio a parete per TV inclinabile serie Monoprice EZ per TV da 32" a 70", peso massimo 154 libbre, modelli VESA fino a 400x400 Lrg - Staffa di montaggio da 32"- 70"

Brand:Monoprice

3.7/5

€
87.36

Facile installazione con livello integrato e tutto l'hardware di montaggio è incluso. La certificazione Underwriter Laboratories (UL) garantisce sicurezza e affidabilità. Facilmente montabile su qualsiasi tipo di parete (mattoni, cemento, montanti in legno, ecc.). Schemi di montaggio standard VESA da 75x75 a 400x200 e fino a 165 libbre. Progettato per TV al plasma, LCD e LED a schermo piatto da 32 pollici a 55 pollici.

Quantity

Aggiungi al carrello Compra subito

EAN: 0844660059158

Categories: Elettronica, Televisione e video, Accessori televisivi, Supporti TV da soffitto e da parete,

Brand	Monoprice
Compatible Devices	Televisions
Minimum Compatible Size	32 Inches
Mounting Type	Wall Mount
Movement Type	Tilt
TV Size	70 Inches

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Josh

Great Extra Large Articuating Mount for the Price

This mount is fairly solid with a 100lb 85" TV plus some accessories on it and honestly for the money ain't bad at all for mounting extra large displays. That said don't trust the built in level, bring your own to the party. Luckily the built in level was only slightly off and I was able to easily correct the TV using the mount adjustments, but it annoyed me since I try to be more accurate in my installations. As was loading it up on the heavier side I hit two studs (with 16" on center construction that's all you can hit) with the included lag's at the top mount to use the slide on feature to hold it up for me and then two spax power lags in the bottom mounts since I trust those more with heavy loads. I also used 8 more 265 snap toggles into the dry wall evenly spaced around the remaining mounting holes to get 4 even spaced in between the 2 studs and 4 out side of the two studs at the very corners. I used the snap toggles to provide as many points of contact as possible, both for some additional load support as well as stability when the mount is extended. This made the mount super stable when moving the ~125lbs that are on it around and I have no worries about that pricey 85" Sony on there is going anywhere. I really like using these sorts of mounts as compared to the slim ones as it makes it much easier to move the display to replace an HDMI cable or access the USB ports for manual upgrades/playing media/etc. When it's a two or more man job to lift the TV on/off the mount, it pays to get this style for those simple tasks that would otherwise be impossible without some help. All that being said there are much much nicer articulating mounts out there, however, they cost far more and honestly don't provide the same value as these heavy duty Monoprice mounts.

Scritto da: Joe

Good product, but faulty installation guide

Pros: the bars and the product itself seems heavy duty Cons: that flimsy brown cardboard in the picture is the stencil to install the mount. However, as u can see, the holes do not line up with the product itself. We had to cut the stencil and line it up with the holes first, before using it on our wall. That’s the only annoying hurdle on this installation. Good luck.

Scritto da: Y.S.

Excellent choice if you want 3 stud wall mount

I was looking for a low profile mount that can span over three 16" studs. This one fit the bill perfectly. It is very sturdy. The back plate is one piece and very solid. I installed an LG 77" OLED TV without problems. My TV requires M6 screws. The kit came with M6 14mm and M6 30mm. Neither one was a perfect fit. I got M6 20mm screws from the local store and they fit this TV perfectly, without any spacers. A few tips before installing: - Make sure you connect all the cables BEFORE you hang the TV, because you will not be able to access the back once the TV is on the bracket. - If you want to adjust the tilt, you should do it before you hang the TV. You cannot really tighten the bolts once the TV is hanging. - Two people are essential for the job if you have a large TV. Overall a really well engineered product at a great price!

Scritto da: JBird

A no-nonsense TV mount

I purchased this TV mount because I wasn't looking for anything fancy that could swivel around. I just needed something that could hang the TV and that would allow me to adjust the tilt. That is exactly what I received. The metal feels good and the included hardware covers basically any type of wall/TV you need to work with. Pros: - Very simple design makes for easy installation. I barely had to read the instructions (but I still did of course). - Feels sturdy enough to hold really heavy televisions (I have an OLED which aren't the lightest flatscreens out there.) - Mounts pretty close to the wall. Looks to be about 1.5 inches of clearance behind the TV. I didn't want to drill holes to hide the cables, so I'm actually happy there was a bit of room. - Tilt adjustment range is very adequate as long as you don't mount the TV too high. If you plan to mount this TV 5+ feet from the floor, you may want a mount that tilts further. Cons: - HUGE quality control issue on the included bubble level. I noticed how crooked it was right out of the box. I own a bubble level and was able to adjust it accordingly, but it's possible another customer may not notice until they've already drilled holes in their wall. (picture of bubble level included) - The included phillips head screws stripped a little more easily than I would hope. Luckily they also could be screwed in via 10mm socket so I just finished them off with that. - Once the TV is in place, you have to screw in these safety screws on the bottom. Unfortunately, they kind of drag along the wall as you screw them in place, so be prepared to paint over the damage if you ever want to move the TV. (Or just live dangerously and don't screw them in at all.) If you're looking for a no-nonsense TV mount, look no further. I would definitely recommend this to others looking for a TV mount, as long as they have their own bubble level!

Scritto da: Maurizio Camponovo

Ottima staffa ma....

Ottima staffa di supporto per monitor grandi. Robusta e completa di tutti gli accessori (viti, distanziali ecc). Una stella in meno per due motivi: i tasselli in dotazione sono di pessima qualità (plasticaccia) e la bolla - livella inserita nella piastra è inaffidabile e grossolana. Per fare un lavoro accurato serve un inclinometro o livella più precisa.

Scritto da: sebastian

monoprice has always been my go to for bargain priced quality products and now that I can get their product on amazon it's even better. Note that this is the ultra slim mount

Does the job, monoprice has always been my go to for bargain priced quality products and now that I can get their product on amazon it's even better. Note that this is the ultra slim mount, that means unless you have small skinny hands you set your tilt at the onset and you're done. If you're crafty you can easily use a tool or tool combo to manipulate it after you've set the safety bolts as well but it's still a pain since there is no way to get at the second lock nut on the inside of each hanger, so that has to be snug just right to move but still offer some resistance to assist the the other ones that you can get at. Otherwise you can mark your angle, take the TV off and tighten it all up and hang it up again. The hardware provided for the wall mount is a softer metal, if you're not rammy it isn't that bad, if you are you might want to use a socket or wrench instead of Philips.. Or replace it with your own lag bolts from the hardware store. I found them just fine if you go nice and easy with good pressure on the gun.. strength wise you are not pulling this mount off the wall if installed properly, there is nothing wrong with the bolts at all in that sense.

Scritto da: Amazon Customer

Very heavy duty

This can easily hold more than 30lbs, it’s really solid and heavy duty. I doubt installation will be of a problem it’s straight forward and I’ve installed dozens of tv wall mounts. However if anything changes I’ll update my review

Scritto da: UK

Very sturdy, slight installation annoyances

Overall this mount is great for my needs. Installed a 65inch tv on it with relative ease. The one con to this device is that it is difficult to screw in the bottom screws on the arms to hold the tv snug to the mount if you have a large tv. Maybe if you have a 42” tv, you can reach it no problem but with 65” and 70” it’s basically impossible to reach. I had to move the arms lower on the tv to get it to fit. But that lifted my TV higher. Maybe a long screwdriver would help resolve the issue.

Scritto da: sonnyk3344

This stand supported my 75" TV, 107 LBS. ...

This stand supported my 75" TV, 107 LBS. without any problems. I returned another one I ordered because it didn't feel safe (wobbly) when you try to move or adjust even though it was rated at 130 LBS. This one is solid when you adjust , does not shake or wobble, supports the weight no problem. It comes with all necessary hardware to mount it.