Posi Lock 110 10" Reach, 1" - 15" Spread, 20 Ton CapacitÃ Estrattore a 3 griffe, 20 tonnellate CapacitÃ , 9.2/3" Reach

Brand:Posi Lock

3.9/5

€
635.52

Estrattore manuale a 3 ganasce con design a gabbia di sicurezza La linea Posi Lock di estrattori manuali per ingranaggi e cuscinetti stabilisce lo standard per rapidità, facilità e praticità. La gabbia di sicurezza in acciaio brevettata blocca le ganasce dell'estrattore saldamente in posizione in ogni momento e impedisce alle ganasce di scattare all'indietro o scivolare via dalla superficie di lavoro. Estrattore di ogni dimensione è disponibile nei modelli a 2 e 3 griffe.

Quantity

Aggiungi al carrello Compra subito

EAN: 0733477000340

Categories: Prodotti industriali e scientifici, Prodotti per la movimentazione dei materiali, Tirare e sollevare, Paranchi e accessori, Sollevatori manuali, Paranchi con estrattore a cricchetto,

Ganasce affusolate per un migliore accesso in spazi ristretti. Capacità di trazione di 20 tonnellate, sbraccio di 9,67 (246 mm) e una gamma di diffusione da 1 a 15 pollici (da 25 a 381 mm) per una maggiore leva di trazione. Ganasce in acciaio forgiato per una maggiore resistenza rispetto alla microfusione. La costruzione a tre ganasce garantisce una distribuzione uniforme del carico, una presa sicura e un'azione di trazione concentrica. Estrattore manuale con tre ganasce per l'estrazione della maggior parte delle parti montate sull'albero, inclusi cuscinetti, ruote, boccole, ingranaggi e pulegge.

Batteries Included?	‎No
Batteries Required?	‎No
Country of Origin	‎USA
Customer Reviews	4.9 4.9 out of 5 stars 65 ratings 4.9 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎P10 tip protector included
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎110
Item Package Quantity	‎1
Item Weight	‎17 pounds
Manufacturer	‎Posi Lock Puller, Inc
Material	‎steel
National Stock Number	‎5120-01-098-0309
Part Number	‎PT110
Product Dimensions	‎21 x 10 x 7 inches
Size	‎20 tons Capacity, 9.2/3" Reach
Style	‎1" - 15" Spread Range, 20-2/5" Overall Length

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: William Nguyen

Made in USA really make a difference

Just love it!!!

Scritto da: Laura Monasmith

Fantastic product

What's not to like? Posi-lock pullers, when properly used can be used for a variety of pulling jobs. This time I used it to pull a bearing hub rusted to an axle shaft. Rust was no match for Posi Lock.

Scritto da: TTexpRESS

All you need and then some to remove rusted on brake rotors

Purchased this item to remove the brake rotors from our Sonata's, which I swear become welded to the wheel mounts. Have used a dent puller in the past to provide the force required to dislodge the rotors, but had been faced with a far greater challenge this last fall. Tried the idea from U-Tube using the screw and nut trick, but failed miserably. This Jaw Puller was a bit pricey, but taking the car to the brake shop would have been far worse. The first try with this puller worked great - being slow and gradual while keeping the torque at about 20-40 ft-lbs provided excellent results. My second approach on the other side was also successful, but not without breaking the rotor first, due to being less gradual and more forceful. Conclusion: Soak the rotor/wheel mount interface with penetrating oil, use gradual torque [20-40 ft-lbs] on the Jaw Puller (WELL BELOW THE SPEC LIMIT), be patient, and use a hammer to tap the rotor during removal - it helps to loosen the bond between the interface and gives you something to do so as to not get bored. Good Luck!

Scritto da: B W

Absolutely love it.

Had some stubborn pulleys to remove and it is much safer than putting in a hydraulic press. I've used many regular "cheap" pullers in the past, but was glad when I had this to remove a pulley. It had a much higher capacity rating than the cheap pullers, too and it can lock in place without falling off. In our press, I've had pieces go flying when they moved a little. This puller was able to remove a pulley that the press couldn't so I'm happy with this even though I've never spent this much on a hand tool before. Furthermore, I didn't have to go to town to pay at the local machine shop and additionally, have to possibly wait a few weeks until they had time to get to it since they're usually a few weeks behind on work anyway.

Scritto da: JA Larson

Great tool, but

This is a high-quality, well-made HD tool. Their customer service is friendly and helpful. The problem I face is the plate I needed to pull off a hub is 14" in diameter and it was very, very difficult to get the jaws to spread that far. Very. Even then the jaws sat well above the plate or you could say the center screw was too long. Oh, order the extra long arms. 3 extra long arms cost more than the puller. It would be nice if they gave you a planning guide on lining up the job with the puller and offered the extra long capability as separate models. I hope it works. This has been a very, very expensive tool.

Scritto da: Suzan

Works awesome.

We got this for our shop. Total beast, if you can't get a shaft out of the bearing/hub with this, your probably going to need to torch it out. Between this and the "hub shocker, tool" , our shop has never come across a wheel bearing it couldn't handle. With have this 20 ton & the 10ton. If you live in the rust belt and you turn wrenches this is a awesome tool to have. Makes easy works of frozen axles to bearing and hubs. Also used on a few frozen on rotors & drums. Well built, heavy piece and replacements parts readily available.

Scritto da: Lawrence

No more cheap and unsafe pullers for me

I used to have a big problem trying to hold a 3 finger puller together , I used rubber bands but it still was hard to hold it in place until it tightened, those days are gone , it was expensive compared to the other pullers but a lot easier and safer to use, no more flying apart when one of the jaws slipped off, I will never go back to the old pullers without the ease and safety of this type of puller

Scritto da: spicewoodtx

Removed 22" cast iron spoke flywheel from antique engine

Expensive tool, but only way I found to remove a 22" spoke flywheel I'm restoring on a 5hp Fairbanks Morse hit and miss antique engine. Read a blog on oldiron website that someone used it for same purpose.

Scritto da: Frank

Five Stars

This puller is amazing. I recommend it to anyone who has seized axle shaft in the wheel hubs.

Scritto da: Neeneenb

Used in heavy industrial shop, quality product, will ...

Used in heavy industrial shop, quality product, will buy more in the future.