OFM ESS-9015 Poltrona direzionale in pelle rigenerata con base a slitta, nera, nera

Name: OFM ESS-9015 Poltrona direzionale in pelle rigenerata con base a slitta, nera, nera
Brand: OFM
SKU: 0845123089415
Price: 304.11 EUR
Availability: InStock

Brand:OFM

3.7/5

€
304.11

Offri ai tuoi clienti un ricevimento di benvenuto con questa sedia Essentials by OFM Reception e Guest Side. Il design moderno ed elegante di ESS-9015 valorizza e si fonde con qualsiasi tipo di arredamento. I tuoi ospiti apprezzeranno il sedile e lo schienale comodamente imbottiti e rivestiti in morbida pelle SofThread per un aspetto e una sensazione di alto livello. L'ESS-9015 dispone anche di braccioli integrati generosamente imbottiti per un maggiore comfort. Il robusto telaio della base a slitta in tubo d'acciaio verniciato a polvere nero ha un design salva-muro per evitare che lo schienale della sedia danneggi le pareti e resisterà anche in caso di uso intenso. L'ESS-9015 è perfetto per la reception o l'area d'attesa, il salotto o ovunque sia necessaria una seduta elegante e moderna. Questo modello soddisfa o supera gli standard del settore in termini di sicurezza e durata ed è coperto dalla garanzia limitata di 5 anni OFM Essentials.

Prodotto non disponibile

EAN: 0845123089415

Categories: Prodotti per ufficio, Mobili per ufficio e illuminazione, Sedie e Divani, Sedie per ospiti e reception,

NEUTRO COLOR si adatta facilmente a qualsiasi spazio, rendendolo l'aggiunta perfetta in qualsiasi punto dell'ufficio. Nota: per garantire un corretto assemblaggio, seguire tutti i passaggi forniti nel manuale dell'utente (fornito in pdf di seguito). LA CAPACITÀ DI PESO è di 250 libbre grazie alla base stabile della sedia per gli ospiti. TELAIO IN TUBO D'ACCIAIO è verniciato a polvere nera e ha un design salvaparete per evitare graffi e graffi. Il rivestimento in CUOIO RIGIDO è composto da sontuoso cuoio rigenerato, comodo e facile da pulire. RECEPTION CHAIR offre il massimo comfort nel tuo ufficio o nella sala d'attesa, questa sedia migliorerà sicuramente qualsiasi spazio. Cuoio rigenerato.

Age Range (Description)	Adult
Arm Style	with-arms
Assembly required	Yes
Back Style	Solid Back
Batteries required	No
Brand	OFM
Care instructions	Wipe Clean
Color	Black, "Black
Country of Origin	China
Customer Reviews	4.6 4.6 out of 5 stars 3,535 ratings 4.6 out of 5 stars
Fabric Type	Bonded Leather
Finish Type	Powder Coated
Finish types	Powder Coated
Form Factor	Upholstered
Frame Material	Alloy Steel
Included Components	Executive Side Chair
Is Discontinued By Manufacturer	No
Item model number	ESS-9015
Item Weight	1 Pounds
Manufacturer	Essentials by OFM
Material	Leather
Model Name	ESS-9015
Pattern	Solid
Product Dimensions	25.5 x 25 x 32.75 inches
Product Dimensions	25.5"D x 25"W x 32.75"H
Recommended Uses For Product	Office
Room Type	Office
Seat Material Type	SofThread Leather
Shape	U-Shaped
Special Feature	Stackable
Style	Sled Base
Theme	Waiting Room, Office, Guest, Reception, Conference
Thickness	1 Inches
Unit Count	1.0 Count
Warranty Description	Ofm essentials 5-year limited warranty.

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: joeb

Great but be prepared to curse.

This chair, excluding the mental turmoil you will encounter assembling it, is very good for the price. The seat is wide and the back provides a mild lumbar support that is comfortable. I’m small-framed and this chair would be appropriate for larger persons. It’s relatively small and indiscreet. The matte-black faux leather is good and the padding is adequate. Time will tell whether the padding holds up or compresses. The big downside with this chair is that you will probably encounter problems when you assemble it. Like other reviewers describe, the screw holes and brackets do not readily line up. And if you get one where the welded seat grasping clamps are not in perfect alignment you will never get it properly assembled. In that case you have a defective unit and you need to return it if you can. The big problem here is that when you encounter line-up problems during assembly you will be unable to tell if it’s a defective frame or if you have just failed to get it right. Be prepared to curse. Assembly advice: You will need two people for assembly. As the instructions warn, do not torque down on the screws until you have all eight of them in place and have what you think is a correctly aligned assembly. Before assembly make sure the individual screws holes are not stripped. Just screw a bolt in each hole to make sure. For some reason you cannot torque down on the screws while doing this dry run so don’t try. Forget about using the supplied Allen head wrench except for the final torque down as it will ruin your fingers. In my toolkit I was able to find an Allen head extension that fit into my ratchet and fit the screws perfectly. The fit has to be exact otherwise you will round off the Allen head. While the screws do have hexagonal heads, these heads do not cleanly fit either American or mm sizes. So using a hexagonal ratchet head will round off the heads. You can use the hexagonal ratchet for initial tightening but for final tightening you should use the Allen head. After the seat and back are initially in place then it’s a matter or gingerly nudging the seat and back while turning the screws in a sequential fashion. Firmly pressing the seat/back into its intended position while turning the Allen head is required. The problem is that all six screws and the seat and back must simultaneously be in the correct alignment before you can torque down on the screws. Here is where you may question whether you have stripped one or more of the screws by (your) excessive tightening or whether you have the screw cross-threaded. It's impossible to tell. But absolutely do not cross-thread. Once everything is in alignment you can then tighten the screws. If aligned you can then really torque down so that the turning resistance tells you have it right. But you are not finished. After that place the chair in the upright position on a flat surface to make sure it sits evenly. If not, you will have to undo ALL of the screws and start again. Finally the sliders that come between the frame and floor do not slide on carpet and will mar hard wood. They are removable via Phillips head screws but removing them will lower the chair height about one inch. As one review points out you can use furniture sliders on the bottom of the chair sliders but I’m not sure if that is a remedy. These chairs are not meant to slide. After about one week of use do a final torque down as the screws may have settled a bit. Do not inset the end caps on the back of the frame until then as you will not be able to get them out without marring the frame. Anyway, this chair is great once you get past the assembly. But assembly should not be this hit-or-miss. But I’m thinking about ordering a second one. Hope this helps.

Scritto da: Amazon Customer

Very Stable

I have balance issues. This chair is sturdy and stable. This not only means it is safe to grab onto, but also means it is a pain scooch up to a table or desk. It's quite comfortable.

Scritto da: Amazon Customer

Easy to slide

Got this to replace a chair just like it. On carpet did not add the plastic blocks on sliders.

Scritto da: Richie

Bought two of these in Summer of 2020

I paid 67$ for each chair. I wouldn’t spend over 80$ on them, and neither should you. They are pretty comfortable at first. After a while the seat pad flattens and I’ve put a pillow down to add some cushion because it would get uncomfortable. It creaks. A lot. I don’t think it’s related to the screws being too tight or anything because both chairs do it and two different people put them together. I happily pay more for the longevity of my things. I knew that for 67$ a piece they wouldn’t stay perfect forever. I’m fact, two years later I’m writing a review now because I was debating on buying another. Seeing these chairs listed at 150$ gave me whiplash. Like I said, I wouldn’t pay over 80$ for an item of this quality considering the good things about it don’t last a measly 2 years.

Scritto da: Amazon Customer

Light chair that can be easily moved to another area

Installing the chair was not easy for me, the instructions were too basic. Very tight fit when using the Allen wrench. It is a good idea to have someone else put the screws in while you use all your strength to line up the screw holes.

Scritto da: R.S

Very comfortable

After my hip surgery I needed a very sturdy and comfortable chair. This one was worth every penny.

Scritto da: Amazon Customer

We bought two of these chairs.

We bought 2 of these chairs for 69.00 just about 8 mos . ago. They have doubled in price now. They might be worth the 75.00-80.00 but I would not pay the asking price now. They look nice and sit well but they are not top of the line chairs. They give in with heavy people. They look nice but I would not pay what they want for them now. They are worth what I paid only.

Scritto da: Nila Castiglia

Its what I expected

So much more comfortable for me than a regular computer chair. great quality easy to move around, Keeps my body in alignment and I use my legs more to get in and out of it, I love my chair!

Scritto da: Kyle

decent for price

I got 5 of these chairs for our vet clinic reception. They are sturdy and wide enough for a larger human and comfy. Easy to assemble as long as you read the directions and not totally tighten each bolt as you go. Too bad they jacked the price up to $300 a chair. I bought them for about $140....

Scritto da: Arvind

Sturdy and Good quality chair

Product is really nice and comfortable, but the hand support needs to be bit wider and softer. Overall very happy with quality and material

Scritto da: Norm.

Great buy.

I am very pleased with this set of 4 chair I purchased. Will be ordering another 2 more in the next couple weeks. Had no problems on the assembly. Found them to be very sturdy with the sled legs but most of all they are very comfortable. You can sit in them for long periods of time. Two thumbs up.

Scritto da: Jonty

Comfortable chair

The chair is comfortable to sit with ample width and good cushion. Its sturdy and easy to assemble. It will definitely last longer than most office chairs with wheels. Its ideal purpose would be a standalone chair in a waiting area etc. However, do note that it might be about 6 inches low for a standard office table for a person of about 5'8''.

Scritto da: ikt-toronto

Sturdier than I thought it would be, looks nice and is comfortable.

Sturdy and very comfortable. I think the so called sled feet make it much more solid. It was finicky to assemble. I believe it is the manufacturing method that causes the problem. It is nothing serious , you will see what I mean when you buy and assemble one. It looks nice -- how long it will last I don't know, but I would definitely recommend it to a family member or even to someone I liked!