Maniglie per stampi a proiettile RCBS

Brand:‎RCBS

3.5/5

95.71

RCBS è specializzata nell'offrire una linea completa di rifornimenti di ricarica per il caricatore manuale domestico. Le forniture per ricariche RCBS stabiliscono lo standard per le attrezzature di ricarica di alta qualità, proprio come hanno fatto per oltre 60 anni. Con sei decenni di esperienza alle spalle, RCBS conosce tutti i dettagli dell'attrezzatura utilizzata dal caricatore di munizioni domestico. La cassa in ottone è la parte più costosa di un carico di munizioni. Ricaricare l'ottone (sostituendo l'innesco, la polvere e il proiettile all'interno dell'involucro di ottone usato) offre un risparmio di circa il 60% rispetto alle munizioni caricate in fabbrica. Le forniture per il caricamento manuale RCBS forniscono ai tiratori tutto il necessario per riutilizzare costosi bossoli di cartucce in ottone ricaricandoli con nuovo primer, polvere e proiettili.

Taglia unica per tutti gli stampi per proiettili RCBS. Perfetto per il lancio di proiettili a casa. Solidi telai in acciaio con manici extra lunghi in legno duro. Maniglie per stampi in legno/acciaio. Maniglie per stampi in legno/acciaio. Maniglie per stampi in legno/acciaio. Maniglie per stampi in legno/acciaio. Maniglie per stampi in legno/acciaio.
Brand Name ‎RCBS
Color ‎Multi
Customer Reviews 4.5 4.5 out of 5 stars 54 ratings 4.5 out of 5 stars
Included Components ‎Wood/Steel Mould Handles
Item Dimensions LxWxH ‎1 x 1 x 1 inches
Item Package Dimensions L x W x H ‎10.7 x 2.2 x 1.2 inches
Item Weight ‎0.06 Pounds
Manufacturer ‎RCBS
Material ‎Blend
Model Name ‎80025
Model Year ‎2012
Number of Items ‎1
Package Weight ‎0.9 Pounds
Part Number ‎80025-RCB
Size ‎One Size
Sport Type ‎Hunting
Suggested Users ‎Unisex-adult

3.5

8 Review
5 Star
74
4 Star
10
3 Star
9
2 Star
3
1 Star
4

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: P. D. Smith
Good quality but be mindful they won't fit everything as is.
I've always liked these handles, and really like Accurate Molds (just got my third, for my 45-70). The RCBS handle never had an issue out of the box before on these molds but as mentioned on Accurate's site, the newer molds appear to have had their holes drilled a bit smaller and it's possible they are in a slightly different position. As is, these no longer work with the mold, requiring a small boring of the handle holes, and possibly some minor filing to the handle itself. Some might not mind. For such a costly handle, not sure why they made the change and I'm going with the Lee 6 cav., though I prefer the RCBS in all other ways.
Scritto da: Hank D
Right mould, right handle.
RCBS bullet moulds are high quality, and it follows that their handles will be too. I have 4 sets with my favorite RCBS moulds mounted and ready to cast. The handles are solid, manufactured of thick plate stock. The hinge bolts have never worked loose, and the alignment has always been good. The only problem I ever experienced was a cracked wooden handle that caused a fertile to loosen. I contacted RCBS, and true to their word, they replaced the handles free. I've read elsewhere of casters using Lee handles with RCBS moulds to save a few bucks, but after a friend gave me a set of Lee handles, I examined them, and tossed them in the recycling bin. Recommended.
Scritto da: Joe
Only RCBS handles that work perfectly
These are the best. It doesn't matter what they tell you Lyman and Lee mold handles off a 2 or 6 cavity mold will NOT work with RCBS. Save the headache, buy these.
Scritto da: gunner
Would not buy these again
Compared to Lyman handles these are cheaply made. The clamp part is a laser cut and stamped part held together with a bolt. The Lyman are forged and riveted. The wood handles are way to long and look like they were cut from a broom handle. When you fasten a die to the handles they are very front heavy and hard to hold. If you look at the picture on site you can see how long they are. I bought these because I bought a used 44 mag mold that is RCBS and had no choice. I normally buy Lyman molds. Not happy but I will modify them to work better. RCBS normally makes a good product but I feel they cheeped out on these. And they are a lot more costly than other makes.
Scritto da: Vark Driver 1
Good product
A little pricey I thought but no other options for casting bullets with their moulds.
Scritto da: VEARL
Four Stars
JUST WHAT I NEEDED
Scritto da: Pen Name
bullet mould
I have not yet to use. I think is good when i have time to make bullet. This bullet mould look good quality.thank .
Scritto da: Goose Slayer
Important accessory
Works perfectly with the RCBS moulds. Well made handles.

Prodotti correlati

hot
hot
hot
Lyman, Brass Smith Powder Trickler
3.8/5

€ 61.71

Lyman, Brass Smith Powder Trickler
3.8/5

€ 61.71

hot
Strumento di decapaggio RCBS Berdan
3.3/5

€ 115.49

Strumento di decapaggio RCBS Berdan
3.3/5

€ 115.49

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart