0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

Extreme Max 5800.0203 Power Wheels Carrelli per motoslitte guidabili - Wide Wide da 7 pollici a 10 pollici

Brand:Extreme Max

3.5/5

€
249.72

Questi carrelli guidabili e sterzanti sono progettati per la massima versatilità e durata. Sia che tu stia spostando la tua slitta su erba e terra, o su una superficie pavimentata come cemento o asfalto, i carrelli per motoslitte guidabili Power Wheels ti aiutano a spostare la tua slitta a velocità fino a 5 MPH. Il set comprende due carrelli da sci con gruppo ruota a coppiglia e un carrello da pista con ruota orientabile per uso non motorizzato. Guida o fai scivolare la tua slitta nel negozio, su un rimorchio o fai retromarcia in spazi ristretti per il rimessaggio. Il design migliorato incorpora una base delle ruote più ampia del 31% per una maggiore stabilità.

Quantity
Aggiungi al carrelloCompra subito

EAN: 0814166021096

Categories: Sport e tempo libero, Sport e forma fisica, Sport invernali, Motoslitta, Parti di ricambio,

Garanzia limitata di due anni. Include due carrelli da sci standard (per sci di larghezza superiore a 7) e un carrello da pista per uso motorizzato e non motorizzato. Base delle ruote migliorata, più ampia del 31% per una maggiore stabilità. 5 ruote maggiorate con montaggio a coppiglia. I carrelli guidabili e sterzanti lavorano su erba, marciapiede, ghiaia e terra a velocità fino a 5 MPH.
Brand Extreme Max
Brand ‎Extreme Max
Color Gold
Country of Origin ‎China
Customer Reviews 4.4 4.4 out of 5 stars 550 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 10.5 x 14.5 x 5.25 inches
Item model number ‎5800.0203
Item Weight 22.37 Pounds
Item Weight ‎22.4 pounds
Manufacturer ‎Extreme Max
Manufacturer Part Number ‎5800.0203
Model ‎5800.0203
Product Dimensions ‎10.5 x 14.5 x 5.25 inches
Style Wide 7 inches to 10 inches

3.5

13 Review
5 Star
65
4 Star
22
3 Star
6
2 Star
4
1 Star
3

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Kirk shaffer
Snowmobile dolly
Awesome product. Would definitely recommend
Scritto da: Sara
Perfect
Exactly what we needed for our snowmobile.
Scritto da: Roger D. Burnett
They stay in Place sled doesn't roll out.
I liked the wheel size is large enough to roll over rough surfaces with out locking up.
Scritto da: Jason Littlefield
Well made. Makes moving our snowmobile around easy.
Love these. Ideal use is on hard surfaces. Driving around on dirt or grass isn't ideal but they will work. The only thing I don't enjoy are the cables that hold them in place around the skies. Would recommend
Scritto da: T. Steen
Good but not perfect
These can be tricky to get installed on the skis and get the cables in place. You eventually learn the trick however. I had to do a modification to get them to work with dual carbide skis on my older RMK. I like a standard furniture dolly over the supplied piece. They do work good to let you move the the sled around or even load on a trailer.
Scritto da: M. Jones
Save yourself a lot of effort and aggravation by spending a little more and getting the best snowmobile dollies on the market
Moving snowmobiles around the garage or shop easily without damaging the concrete is always a challenge. I tried hardwood dollies from Harbor Freight and also cheaper snowmobile dollies with poor results. While they move snowmobiles OK on concrete, they are a bear to get positioned under the snowmobile ski's. First you lift the snowmobile ski's and try to push the dollies under the ski with one of your feet. They once it is under the ski, somehow wedge your foot in front of the dolly while you lower the ski, hoping the dolly does not shoot out from under the ski. Once positioned, you have to hope you don't hit a small rock which will cause the dolly to come flying out from under the ski, starting the process again. These Extreme Max Shop Dollies cannot be easier to get under the snowmobile ski's. Put the attached dolly cable over the ski, lift the ski, and the dolly falls right in place, every time. Once there, it stays in place due to the front (or front/back) cable and the metal sides. Easy to move around the garage and they always stay in place. Want to drive the snowmobile out of the garage onto snow or gravel? No problem, they stay in place. Removal of these dollies is just as easy, lift the ski, the dolly comes forward, ready to be removed. I have ordered two of these dollies for my snowmobiles and love them anytime I have to move a snowmobile in/out of the garage or around the garage. Save yourself a lot of effort and aggravation by spending a little more and getting the best snowmobile dollies on the market
Scritto da: Edgar
Well built
These were well built, and stayed on the skis across pavement, didn’t much care for the back unit, with one wheel only it’s hard to place under the track, whereas a design with three or four coaster wheels you can just lift the sled and kick it under the trac
Scritto da: Cape Dory Sailor
Crudely made, not as easy to use as you might think
One Year Update: About to go in the trash. 1) Ski holders constantly come off at the worst possible time. I frankly cannot imagine anyone riding on gravel or any surface that isn't perfectly flat and level. These things pop out of position just rolling over the 1/8th inch transition from my garage to driveway 2) square-U shape means hardware from spindle\ski hits the inside edge of the assembly, gets jammed up, and bends them 3) Have tried other solutions to replace annoying cables, and nothing works. ------ Overall, I wish I had just made my own dollies; it wouldn't have taken much additional effort. They do work when you finally get them set up correctly. - Assembly is a pain, and super tedious, with no directions in the box. Getting the hitch pins in the axles required struggling, and I mean struggling, using a pair of incredibly powerful Knipex Cobra pliers. There was no way the hitch pins were going to go in by hand, because they drilled the holes too small for the pins+coating. - All corners, especially the ends of the axles (which are very crudely cut), are super sharp. I have a feeling they chose to use a yellow oxide coating because the parts just aren't finished to a quality that they could be painted. - These don't stay on the skis or balance as well as you'd think; you have to mess around with the orientation of the dollies (which are asymmetrical) and cables. - The cables are really, really difficult to fit in the slots. There are so many other ways they could have done this, but I have a feeling this is cheapest way to produce these. - I don't understand the value of the rear dolly. Messing with getting it under the sled is not worth it compared to something like a moving dolly, and you definitely aren't going to want to damage your track by leaving it under there for storage. I'm not saying this is a bad product that doesn't work, it's just not a good product. In my opinion, this is among the most frustrating kinds of products; it's a good idea that has been wrecked by cost-cutting.
Scritto da: Craig
Great product, a few draw backs
Product is built very solid. No complaints on that end. Perhaps it was my own doing, but when I try to drive with the front wheels on, they seem to loose their place on the skis. I have tried different configurations with the straps but end up having the same issue. As for moving it around the garage on a flat surface, it works perfectly. One option I noticed on a much cheaper model was the front wheels were able to pivot. With this option, it makes moving the skidoo sideways much easier. Overall, I would buy this product again as it is very well made.
Scritto da: Amazon Customer
Works great on a heavy machine
I have a Yamaha vkPro weighing over 1000 lbs with driver and drove from a cement floor in the garage, over a hard packed gravel driveway to a portable shelter on a wooden platform. With the exception of a soft spot turning up to a ramp entering the shelter the system worked perfectly. The wheels dug in when making the turn but after some back and forth jockeying, it made it up the ramp. I have to jack up the machine to put the track dolly in place but once in place it swung smoothly over a wooden plank floor. I’ll remove the track dolly for storage so there won’t be a concentrated pressure point on the wood. A great invention
Scritto da: Duvie
You cant beat these !!
These wheels are terrific, They do everything they show in the video of them. They are easy to install, very solid and well made, and can be easily be modified if you need to because of your trailer width, otherwise they are perfect as they are. I have used them on my Polaris Trail Touring in both snow (Hard packed) and in gravel on the driveway to load my sled onto and remove from my trailer. Also great to drive in and out of the garage. You need a bit more room for turning when these are under your skis, but other than that they are just what you want and need. No tools required to install or remove, only to do minor assembly when you first receive these.. No problem at all with these !! You will be very satisfied with them as I am.
Scritto da: R. S.
Very sturdy, designed to last, but clumsy to deal with while solo.
I'll start by saying that my touring sled weighs about 700lbs (plus gas, plus snow/ice, plus gear). Lifting my sled off the ground is not a huge issue for me, however getting it on to this uni-rear-wheel dolly has proved to be a huge pain. I have to lift the track about 6 inches just to clear this plate (as it does not sit parallel to the ground. If it catches at any point, the plate will spin or get knocked around, and leave you gambling on your placement when setting it down (which on one occasion was the edge of the track, and shot across the garage at a dangerous velocity). I wish I could say I love these, as they are very sturdy. I also think it should come with an extra set of standard size cables to suit the a set up using the inner mounting holes without the extension plates... I changed back to 6" wide skis, and took out the extension plates. Now the cables are wayyy too long. The pivot point of the ski now goes over the edge of the dolly whenever I hit any small bump (dropping the front of the ski to the pavement, and screwing your steering up quite a bit). If they'd included a set of standard of cables with this, it would have been awarded at least 4 stars.
Scritto da: Claudio
It's a must have
Very sturdy and durable. Makes moving sleds around a breeze. Big wheels makes it easy to go over things. The only down fall you can't push the sled sideways like the others with 8 casters under the skies. It's a definite buy. Very happy.

Prodotti correlati

hot
Extreme Max 5600.5436 Fat Head Studs - 1.345", Confezione da 36 1.345 pollici Confezione da 36
3.5/5

€ 92.81

Extreme Max 5600.5436 Fat Head Studs - 1.345", Confezione da 36 1.345 pollici Confezione da 36
3.5/5

€ 92.81

hot
Extreme Max 5800.0200 Power Wheels Carrelli per motoslitta sterzanti guidabili - Standard, per sci fino a 7" di larghezza, compatibili con fuoristrada, Gold Standard fino a 7 pollici
3.5/5

€ 196.51

Extreme Max 5800.0200 Power Wheels Carrelli per motoslitta sterzanti guidabili - Standard, per sci fino a 7" di larghezza, compatibili con fuoristrada, Gold Standard fino a 7 pollici
3.5/5

€ 196.51

hot
Extreme Max 5800.0203 Power Wheels Carrelli per motoslitte guidabili - Wide Wide da 7 pollici a 10 pollici
3.5/5

€ 249.72

Extreme Max 5800.0203 Power Wheels Carrelli per motoslitte guidabili - Wide Wide da 7 pollici a 10 pollici
3.5/5

€ 249.72

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu