Drill America Set di punte da trapano metriche al cobalto da 25 pezzi in custodia rotonda, per impieghi gravosi, finitura in ossido dorato per forare metallo, legno, plastica, dimensioni da 1 mm a 13 mm per 0,5 mm, serie DWDCO ZMD/A4025-CO-PC

Name: Drill America Set di punte da trapano metriche al cobalto da 25 pezzi in custodia rotonda, per impieghi gravosi, finitura in ossido dorato per forare metallo, legno, plastica, dimensioni da 1 mm a 13 mm per 0,5 mm, serie DWDCO ZMD/A4025-CO-PC
Brand: Drill America
SKU: 0887861316606
Price: 208.87 EUR
Availability: InStock

Brand:Drill America

3.5/5

€
208.87

INFORMAZIONI SU DRILL AMERICA: Drill America è specializzata nella fornitura di una linea completa di utensili da taglio industriali e per contoterzisti dal 1923; I nostri prodotti includono punte, maschi e matrici, alesatori, frese, frese in metallo duro, svasatori e altro ancora. DIMENSIONI METRICHE INCLUSE: il set completo di punte da trapano da 25 pezzi viene fornito con custodia in plastica e include dimensioni metriche che vanno da 1 mm a 13 mm per 0,5 mm. ANGOLO DI TAGLIO DI 135 GRADI: le punte da trapano hanno un punto di divisione di 135 gradi per l'autocentraggio, la penetrazione rapida e la perforazione con precisione. UTILIZZI MIGLIORI: Le punte m35 al cobalto al 5% sono efficaci nella perforazione di materiali resistenti e ad alta resistenza alla trazione come Inconel, acciaio inossidabile e titanio, nonché legno, plastica e altri metalli duri. TRAPANO AD ALTA VELOCITÀ: prodotte secondo lo standard aerospaziale nazionale 907 e realizzate in cobalto resistente al calore, queste punte presentano una maggiore durezza rossa che consente velocità fino al 30% superiori rispetto alle punte in acciaio ad alta velocità.

Quantity

Aggiungi al carrello Compra subito

EAN: 0887861316606

Categories: Utensili elettrici e manuali, Parti e accessori per utensili elettrici, Parti e accessori per trapani elettrici, Punta del trapano, Pezzi di torsione, Punte da trapano per carpentiere,

Item model number	ZMD/A4025-CO-PC
Manufacturer	Drill America
Package Dimensions	8.7 x 4.88 x 3.82 inches; 2.78 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Mark

A MUST PURCHASE. ALL OTHERS SUBPAR

For years I purchased the titanium bits from Lowe’s. I always hated to do any drilling in any type steel. Well I discovered why the titanium bits suck. I bought these as I had 1/4” hardened steel to drill through (8 - 12 holes to be exact and wanted to make the job tolerable. So happy I purchased these bits. Cost a bit more then titanium bits but made the job so easy. These bits cut through steel like butter on the very first drill to tha last. The 12th hole was just as easy as the 1st. These hold their sharpness and wished I’d known about these years ago. Don’t second guess this purchase just Do it. You will never go back to a Lowes brand bit.

Scritto da: William I.

Well- you might get one good use out of it- one time only

The 9/64ths didn't make it as a pilot hole drill...LOL.... Most of the other drills work- but get dull after the first use. 73.00....wow, cheaper to buy Harbor Freight a few times.

Scritto da: Tim Hamilton

very good drill bits

great drill bits very strong and sharp, very durable

Scritto da: Kelli McClain

Hubby gifted his brand new drill bit set to his nephew and I reordered a new set ASAP!!

Ordered for my husband, he doesn't really say alot about his tools, especially if he likes them. You don't want to be around to hear if he hates them! These must be great since he gifted them to his nephew and had me order another set ASAP!

Scritto da: Patrick C.

Good for the price

I already have a complete (115 pc) set of Chicago-Latrobe 550, which are also Cobalt, 135 deg, split-point, straw-finished bits. I bought the Drill America bits as a lower-cost complement for work where I want the extra hardness, heat resistance, and sharpenability (more on this below) of Cobalt but don't want to risk breaking my good bits. The bottom line is that while the Drill America bits aren't up to the level of the 550s, they're as good as or better than expected for the price. I've used onee of these bits top drill holes in annealed O1 tool steel plate, and it held up as well as you'd expect from Cobalt HSS, though maybe a little worse than I'd expect from the C-Ls. The C-L 550s are M42 Cobalt HSS, and it would be interesting to know if these are M42 or M35 - I suspect the latter. Where the Drill Americas come up a bit short is in quality/precision of grinding, with two noticeable issues: The trailing face of a split-point bit should ideally meet the cutting edge at a point, though in reality all manufacturers leave a tiny chisel point to allow for machining tolerances (i.e. the split doesn't quite intersect the cutting edge). Those residual chisel points are noticeably (50-100%) larger on the Drill America bits than on the Chicago-Latrobes, though both are MUCH smaller than the chisel point on a conventional bit, and both are small enough to avoid wandering. A more serious issue is that a couple of the smaller bits are mis-ground such that the trailing edge of the splitting edge is almost on top of the bit's cutting edge, leaving a very thin flute. Both of the grinding issues are foregivable in my opinion both because of the low cost of the bits, and because the key benefits of cobalt bits is that they derive their hardness from bulk material properties rather than from a coating (oxide, TiN, TiAlN, etc). You can grind them over and over and they remain as durable as when new. If you have a Drill Doctor or drill-bit grinding fixture that can do split points then these are a no-brainer.

Scritto da: Cyndy Brand

A decent but for the price.

The bits seem to have a very soft shank so any slippage in the chuck will gouge the shank.

Scritto da: Richard Moorman

These bits are American made. They are good.

Not wild about the container they come in.

Scritto da: Kevin Potts

Good bits

So far they seem to be a good set of bits....nice and sharp. Still too early for me to give them a rating on durability though. Will see how they hold up over the next few months. My only complaint as of now is the barely readable bit size numbers that are on the top. I like the case they come in, but the black plastic with slightly raised black numbers is very difficult to read. Have to turn them into the light just right in order to do so. I deducted 1 start from the rating because of this. I was able to fix this issue significantly by applying a thin coat of white primer to the top. Made the numbers much more legible.

Scritto da: Cliff

Don't bother Looking any further for other drill bits. Get these.

Look no further! If you are thinking about buying these, don't hesitate. You cannot ask for more out of these drill bits, long lasting and the carrying case is super convenient. I wished the marking of the size of the bits could be a little bit more visible, but that's nitpicking. Easy for the manufacturer to improve on the next iteration that comes out.

Scritto da: Emil Shekhter

Not a professional set.

Not a set you want to have if you working with stainless. Drill bits need to be reshaped often. (Cutting fluid been used) Not recommended

Scritto da: Tom Sawyer

Best drill bits I have ever bought

Those are the best drill bits I have ever bought so far. They cut through metal and hold their sharpness

Scritto da: DLA

Faulty 3/8" bit.

I received this Cobalt bit set yesterday. The first bit I used was the 3/8" and using my drill press unsuccessfuly attempted to drill through 1/8" thick ordinary steel. Would hardly scratch surface. Next bit size up (25/64) went through very easily. 3/8" bit must be faulty or perhaps had already been used? I would be happy with a replacement bit but apparently there is no way to contact seller directly and appears I would be responsible for any return postage. I am not happy.

Scritto da: Steven Meldrum

Decent. So far they work well. Stickers on ...

Decent. So far they work well. Stickers on case are amusing. Rust proof case. The case is plastic so I hope it doesn't rust.