Drill America 4"-8 NPT Rubinetto per tubi in acciaio al carbonio, serie DWT

Brand:Drill America

3.8/5

€
1076.74

Il rubinetto per tubi in acciaio al carbonio Qualtech della serie Drill America DWTPT è progettato per pulire e/o riavvitare i filetti dei tubi danneggiati o bloccati. È adatto per filettare un'ampia varietà di materiali sia ferrosi che non ferrosi. La dimensione nominale di un rubinetto è quella del raccordo da maschiare, non la dimensione effettiva del rubinetto. Il filo si assottiglia di 3/4 di pollice per piede. Tutti i rubinetti per tubi sono dotati di uno smusso filettato da 2-1/2 a 3-1/2. Le filettature NPT richiedono l'uso di un sigillante come nastro in teflon o composto per tubi. Gli utensili non rivestiti presentano solo il substrato di base senza alcun trattamento o rivestimento aggiuntivo e sono adatti per un'ampia gamma di applicazioni. Tondo con gambo terminale quadrato. Gli utensili a scanalatura dritta consentono ai trucioli di raccogliersi nelle scanalature durante il taglio e sono adatti per la maggior parte delle applicazioni in tagli poco profondi.

Quantity

Aggiungi al carrello Compra subito

EAN: 0887861076388

Categories: Prodotti industriali e scientifici, Utensili da taglio, Rubinetti, Rubinetti per tubi,

Gli utensili a scanalatura dritta consentono ai trucioli di raccogliersi nelle scanalature durante il taglio e sono adatti per la maggior parte delle applicazioni in tagli poco profondi. Gambo tondo con estremità quadrata. Gli utensili non rivestiti presentano solo il substrato di base senza alcun trattamento o rivestimento aggiuntivo e sono adatti per un'ampia gamma di applicazioni. I rubinetti per tubi in acciaio al carbonio sono progettati per pulire e/o riavvitare i filetti dei tubi danneggiati o inceppati.

Is Discontinued By Manufacturer	No
Item model number	DWTPT4INCH
Manufacturer	Drill America
Product Dimensions	6 x 4 x 2 inches; 1 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Bill Lynn

Good for RV water heater

Our Forest River 27RWLS RV anode needed relacing. Threads corroded badly. This cleaned them perfectly. Will get a few more years out of this heater. Model SW6del. Videos on youtube helped.

Scritto da: Amazon Customer

Handy Thread Tap

Had a hard to get at water supply valve to a Cabin that I was going to have to replace. A small leak developed on the connection. Found this thread compatible sized tap to clean the rust/chlorides that had built up on the connection. "Chased" the threads, added pipe compound and reattached fitting. Saved me a lot of work in digging up the supply line. A priceless short cut well worth it!

Scritto da: Marco M

Good quality - good price

Did the job in cleaning rusted threads in a cast iron stack. Using it even just once saved me a lot of money.

Scritto da: ernesto

Good tap

Just what I needed to get the job done .

Scritto da: Paul Ramsden

Changing a pipe from NPT (tapered) to NPS

I fixed my pool pump connection by buying a tapered pipe coupling and changing it to straight.

Scritto da: Thomas K.

Worked great

Had to re-tap hole for anode rod in my RV water heater. Only took one pass. Requires oddball 13/16" socket.

Scritto da: Luis Q.

The durability of the tool

I ordered the wrong tool,I needed nps tap but ordered npt. Otherwise it was great.

Scritto da: Hyman Lipschitz, MD

This is not a Toy

The tap came packaged in a telescoping plastic tube similar to most other machine tool purchases. It was ordered to chase the threads on a welded-in female coupling in a steel tank that experienced a jam when attempting to attach a street elbow. This tap served its purpose very well. Of course, everything was cleaned as well as possible beforehand, and copious amounts of sulfurated RIDGID brand cutting oil was applied all during the chase. I was careful to only go a smidgeon after the cutting edges reached the "wall," and backed off around 180 degrees to clean the work. I removed the tap and cleaned it in a pan of solvent three or four times, making sure to brush out all the steel debris. I read reviews of this tool on Amazon and see how people mangled their tools by mostly being impatient. Running against the "wall" for 90 degrees is asking for trouble. With something this expensive you want to treat it like it was made out of gold.

Scritto da: Lorrick

A Good Product

A good Product and great value for money, a well made item

Scritto da: Jimbo

Attention RVers

Used this 3/4" NPT Tap to clean the threads for the Anode Rod on my Suburban Water Heater in my Motorhome. Used a little vegetable oil on the Tap for lubricant since regular petroleum based oils could possibly contaminate the water lines in the motorhome. The Anode Rod fits much better now and doesn't feel like I'm cross threading while installing. Good tool to have for future maintenance.

Scritto da: Andrew harrigan

Pool heater problem.

My drain plugs wouldn't screw back into my pool heater,I noticed the threads in the heater were rusted and damaged,l tried everything but still could not get plugs to enter the heater screw drain holes.I determined I needed a 1/4 -18npt tap and went straight To Amazon and found a carbon steel 1/4-18 not high quality tap which was delivered next morning.I gently retapped the drain holes and entered plugs with no problem.I opened up the pool and thanks to Amazon the family were back swimming.Amazon has never let me down love you guys.

Scritto da: S Horner

Good

I used this to re-thread an old copper waste pipe that had got messed up. It cleaned out the threads nicely, all shiny copper, and after that no problem with the new fitting.

Scritto da: Yohann S.

Stay away. Will do more damage than good

The media could not be loaded. Never seen a new tap in such bad condition. Don't buy it.