0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

Dremel 4486 Mandrino autoserrante, ideale per accessori per utensili rotanti con codolo da 1/32" (0,8 mm) a 1/8" (3,2 mm), argento

Brand:Dremel

3.6/5

€
36.07

Servizio clienti con sede negli Stati Uniti: disponibile tramite chat, e-mail, telefono o visita il nostro centro di assistenza a Racine, WI. Gli accessori Dremel sono anche codificati a colori in base alle categorie di utilizzo, per trovare più mandrini/mandrini/pinze/accessori rotanti vari guardare il codice colore marrone. Può essere utilizzato con l'albero flessibile Dremel 225 e l'attacco ad angolo retto 575. Compatibile con tutti gli utensili rotanti a batteria e con cavo Dremel. Ideale per accessori leggeri tra cui punte da trapano, tamburi per levigatura, dischi per lucidatura, spazzole metalliche e setole e dischi da taglio. Il mandrino a 3 griffe in acciaio contiene vari accessori con gambo da 1/32 a 1/8”. Cambia rapidamente e facilmente le punte degli accessori sugli utensili rotanti Dremel senza cambiare le pinze. Elimina la pinza e la chiave quando cambi gli accessori Dremel.

Quantity
Aggiungi al carrelloCompra subito

EAN: 0080596011796

Categories: Strumenti e miglioramento della casa, Utensili elettrici e manuali, Parti e accessori per utensili elettrici, Parti e accessori per trapani elettrici, Mandrini per trapano,

Servizio clienti con sede negli Stati Uniti: disponibile tramite chat, e-mail, telefono o visita il nostro centro di assistenza a Racine, WI. Gli accessori Dremel sono anche codificati a colori in base alle categorie di utilizzo, per trovare più mandrini/mandrini/pinze/accessori rotanti vari guardare il codice colore marrone. Può essere utilizzato con l'albero flessibile Dremel 225 e l'attacco ad angolo retto 575. Compatibile con tutti gli utensili rotanti a batteria e con cavo Dremel. Ideale per accessori leggeri tra cui punte da trapano, tamburi per levigatura, dischi per lucidatura, spazzole metalliche e setole e dischi da taglio. Il mandrino a 3 griffe in acciaio contiene vari accessori con gambo da 1/32 a 1/8”. Cambia rapidamente e facilmente le punte degli accessori sugli utensili rotanti Dremel senza cambiare le pinze. Elimina la pinza e la chiave quando cambi gli accessori Dremel.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Dremel
Color ‎Silver
Compatible Devices Drilling Machine
Customer Reviews 4.6 4.6 out of 5 stars 11,450 ratings 4.6 out of 5 stars
Included Components Unit^Instruction Guide
Included Components ‎Unit^Instruction Guide
Is Discontinued By Manufacturer ‎No
Item model number ‎4486
Item Package Quantity ‎1
Item Weight 0.3 Ounces
Item Weight ‎0.3 ounces
Manufacturer ‎Dremel
Measurement System ‎Metric
National Stock Number ‎3460-01-528-3146
Number Of Pieces ‎1
Part Number ‎4486
Power Source ‎Hand Powered
Product Dimensions ‎3.4 x 1.8 x 0.3 inches
Size ‎Pack of 1
Warranty Description ‎Product Defects Only

3.6

13 Review
5 Star
79
4 Star
12
3 Star
4
2 Star
2
1 Star
3

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: mike robert
It's a Dremel!
Chuck is a must-have for any of the Dremel rotary tools, as well as the flexible extension, which I find myself using almost exclusively. The chuck allows a secure, positive clamping of the bits, as well as a little more capability than the little one that simply have the locking nut that came with my tool. Very pleased with this chuck.
Scritto da: Dollar Bill
Best Made Dremel Chuck Available
This chuck is far superior to all of the other rotary tool chucks I've seen. It's 100% steel including the jaws where most are made of ZAMAK or aluminum. Unfortunately for me the mounting hole/threads were too small to fit my die grinder. This chuck has M7 x .75M threads and my shaft takes the larger size. It would have saved ordering and returning had this information been available - Not referenced in the Amazon nor the Dremel web sites. In keeping with Amazon's outstanding customer service, the item was easily returned and cheerfully refunded. First photo shows this chuck dimension and the second shows how to measure your tool shaft size.
Scritto da: Steven M Jr.
Absolutely unbelievable item
Saves you so much time changing out different bits and different attachments
Scritto da: M. TURNER
It does what it says on the label.
Handy dandy accessory for a Dremel. I'm a fan. I got it slightly discounted, and so that's just extra cool. -- Dremels are cool, and the keyless chuck is cool. 10/10. Recommended.
Scritto da: Alan D
This chuck is well made and does exactly what it says. But could have easy design improvements.
This chuck does exactly what it claims and is simple, but well made and it closes up precisely. I do have 2 issues with it. First- it would be nice if its capacity was maybe 5-6 mm instead of 3.3 (1/8 in) for use with small drills. Second- My Dremel 4000 came with the EZ Twist nose cap, which has a steel disc insert with flat spots which can engage the flats on the collet nut, saving having to find the little wrench. (see picture- black line & blue line.) The chuck also has flats- see red line on picture. BUT the rounded area where the flats are ground is too big in diameter to fit into the rounded part of the hole in the nose cap! Distance across the flats is not a problem - 9.75 mm on the nose cap interior- 9.57 mm on chuck, and 9.44mm (a bit sloppy) on the collet nut (your mileage may vary!) Because of this, the EZ Twist does not work with the chuck, but the design could be easily changed. MY SOLUTION- two parts- put chuck on tool (without nose cap) run the tool and carefully hold a diamond file against that shoulder to reduce its diameter. I also used a rounded diamond file to enlarge only the curved parts of the hole in the nose cap. Be Careful! Measure and test fit a lot, you can overdo it.... If Dremel would increase the size and fix the nose cap fitment this would get all 5s from me!!!!
Scritto da: Penelope Molenburg
Perfect
This was just what I was looking for. Brand was Dremel and very fast shipping. This piece gets worn after time using the wrench. Now I have a spare for when mine goes bad. Can't beat that. The pricing was very fair considering the prices at big name stores.
Scritto da: John Sulsenti
Genuine Dremel part!
Fit my old model 395 & 12v. model. This is not the Chinese version. They don't fit Dremel.
Scritto da: Helix
This chuck works great
While holding the lock button on the dremel, thread the keyless chuck on and notice the jaws of the chuck start to close. Continuing to hold the lock button and threading the keyless chuck on will cause the three jaws to tighten against one another (or a tool if you have one inserted). Reverse the direction of threading and the jaws will open back up. (I can’t believe how many reviews I read where people we’re trying the operate the chuck in some other manner and destroyed the chuck, claiming it was seized right out of the package ???? perhaps they shouldn’t use power tools ???? )
Scritto da: michael smith
Dose the job
Nice little cuck well made.
Scritto da: Tbo
Does the job, but not sure it's a genuine Dremel part.
The media could not be loaded. Fitted a Dremel 4000 so would probably fit other Dremel multi tools. Good piece of kit for quick change of accessories. Not convinced that it’s a genuine Dremel part as it arrived from China in non-branded packaging. So far used successfully with several Drill Bits, Grinding Stones, Bristle Brushes & Sanding Bands, Looks to be fairly robust and the machining of the internal shaft threading looks good. Accessories need to be fitted tight and fairly deep into the chuck jaws to avoid excess vibrating & oscillations when rotating at high speeds. Not sure of the quality of the metal in the small springs inside the bottom of the jaws so they might benefit from occasional lubrication to avoid rusting. Only time will tell how long it lasts. Only Gave a four star rating on account of the possible misleading Dremel branding.
Scritto da: S. D. Spicer
If there's small price difference stick with the original...
Not much reason to hate it really. It's an original made by Dremel chuck and it works perfectly. Bit annoyed there wasn't one with the Dremel I brought, but that doesn't fault the chuck, just the marketing. Some of the knock-offs are fine, but others simply don't fit. I've had ones that worked and those which were a waste of time. If the price difference isn't huge - stick to the original.
Scritto da: Alan S.
,,,
Good quality and easy to use
Scritto da: Besford
Why aren't these standard?
Fitted to my Dremel clone and works perfectly. So much more convenient than those multiple sizes of collets. Why isn't this the standard fit?

Prodotti correlati

hot
Jacobs 14442 34-02 Mandrino con chiave per cuscinetti a strisciamento per impieghi gravosi da 1/2 pollice con attacco conico Jacobs n. 02
2.7/5

€ 212.10

Jacobs 14442 34-02 Mandrino con chiave per cuscinetti a strisciamento per impieghi gravosi da 1/2 pollice con attacco conico Jacobs n. 02
2.7/5

€ 212.10

hot
WEN DPA131H Heavy Duty JT33 Mandrino per trapano senza chiave con capacità da 1/64 a 1/2 pollice
3.3/5

€ 71.14

WEN DPA131H Heavy Duty JT33 Mandrino per trapano senza chiave con capacità da 1/64 a 1/2 pollice
3.3/5

€ 71.14

hot
Prodotti per la lavorazione del legno PSI Mandrino per trapano TM32 da 1/2 pollice con mandrino conico Morse n. 2 (1/2" 2MT) Mandrino da 1/2" 2MT
3.8/5

€ 80.55

Prodotti per la lavorazione del legno PSI Mandrino per trapano TM32 da 1/2 pollice con mandrino conico Morse n. 2 (1/2" 2MT) Mandrino da 1/2" 2MT
3.8/5

€ 80.55

hot
HHIP 1/32-1/2 INCH JT33 Mandrino con chiave (3700-0102) Capacità 1/32-1/2" JT33 Attacco conico
3.5/5

€ 54.72

HHIP 1/32-1/2 INCH JT33 Mandrino con chiave (3700-0102) Capacità 1/32-1/2" JT33 Attacco conico
3.5/5

€ 54.72

hot
Hitachi 303334 Chiave per mandrino a 3 griffe con chiave S2A per mandrini a 3 griffe
3.9/5

€ 36.50

Hitachi 303334 Chiave per mandrino a 3 griffe con chiave S2A per mandrini a 3 griffe
3.9/5

€ 36.50

hot
Adattatore di conversione mandrino senza chiave NEIKO 20753A
0.1/5

€ 614.28

Adattatore di conversione mandrino senza chiave NEIKO 20753A
0.1/5

€ 614.28

hot
CS Unitec
4.1/5

€ 163.44

CS Unitec
4.1/5

€ 163.44

hot
Mandrino per trapano a percussione a chiave Röhm 600581 Inserto in metallo duro, con avvolgimento adattatore SDS-Plus, capacità 2,5-13 mm, diametro 42,9 mm
3.4/5

€ 128.56

Mandrino per trapano a percussione a chiave Röhm 600581 Inserto in metallo duro, con avvolgimento adattatore SDS-Plus, capacità 2,5-13 mm, diametro 42,9 mm
3.4/5

€ 128.56

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu