0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

Chapin International 1352 Spruzzatore per impieghi gravosi in acciaio tri-possidico industriale da 3 galloni per applicazioni chimiche industriali, nero

Brand:Chapin International

3.2/5

€
188.05

Lo spruzzatore per impieghi gravosi in metallo industriale 1352 di Chapin è una necessità del settore della manutenzione. Può gestire un'ampia gamma di applicazioni, dalla rimozione dell'amianto all'abbellimento professionale. Consigliato per i professionisti e utilizzato anche dai proprietari di case che cercano uno spruzzatore di potenza industriale per il lavoro domestico quotidiano. Il suo serbatoio Tri-Poxy da 3 galloni è protetto da ruggine, corrosione e ammaccature e la sua apertura a imbuto a bocca larga ne facilita il riempimento e la pulizia. Dispone inoltre di un gruppo di chiusura in ottone di alta qualità e di un tubo rinforzato da 36 pollici per una maggiore durata. Serbatoio Tri-Poxy da 3 galloni per protezione contro ruggine, corrosione e ammaccature Apertura a imbuto a bocca larga per facilitare il riempimento e la pulizia Tubo rinforzato da 36 mm Guarnizioni resistenti agli agenti chimici Bacchetta, ugello e chiusura in ottone con funzione di blocco Applicazioni: olio per forme, additivi per calcestruzzo Documenti e supporto imbuto) Materiale serbatoio Acciaio Tri-Poxy® Tipo pompa pistone Lunghezza tubo (pollici) 36 Materiale tubo rinforzato Lunghezza bacchetta di estensione (pollici) 18 Materiale bacchetta di prolunga ottone Materiale guarnizione resistente agli agenti chimici Ugello ottone ventola Filtro no Maniglia lega metallica Materiale chiusura ottone Funzione di blocco si Valvola limitatrice di pressione no Spruzzo/portata (GPM) 0,4-0,5 Pressione di esercizio (PSI) 40-60 Tracolla nessuna Dimensioni articolo (L x P x A â pollici) 8,1 x 8,1 x 22,8 Articolo Peso (libbre) 7,31 Garanzia Durata limitata *La distanza di spruzzo dipende da molti fattori come la dimensione dell'orifizio dell'ugello regolata, la pressione del serbatoio, l'interferenza del vento e l'angolo di inclinazione. Le distanze di spruzzo possono variare in base all'applicazione specifica dell'utente. A causa del nostro continuo processo di miglioramento del prodotto, le specifiche del prodotto possono cambiare senza preavviso.

Prodotto non disponibile

EAN: 023883013523

Categories: Patio, prato e giardino, Giardinaggio e cura del prato, Spruzzatori e accessori,

Tenute e guarnizioni resistenti agli agenti chimici Progettate per gestire una varietà di sostanze chimiche (controllare le istruzioni del produttore delle sostanze chimiche). Bacchetta in ottone, ugello e spegnimento con funzione di blocco. Compatibile per la maggior parte delle applicazioni professionali, adatto anche per i proprietari di case (controllare le istruzioni dei produttori di prodotti chimici). Resistente serbatoio Tri-Proxy da 3 galloni con un'apertura della bocca a imbuto larga 4 pollici per un facile riempimento e pulizia.
Brand Chapin International
Color Black
Country of Origin USA
Customer Reviews 4.1 4.1 out of 5 stars 138 ratings 4.1 out of 5 stars
Hose Length 36 Inches
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 8.4 x 8.4 x 23.4 inches
Item model number 1352
Item Weight 6.54 pounds
Manufacturer Chapin International
Material Reinforced PVC Brass brass
Model Name 1352
Power Source Manual
Product Dimensions 8.4 x 8.4 x 23.4 inches
Style Heavy Duty,Durable
Tank Volume 3 Gallons

3.2

13 Review
5 Star
63
4 Star
12
3 Star
10
2 Star
4
1 Star
11

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Adam
The best sprayer for construction
These work good but wish I came with the bigger spray tip
Scritto da: Todd Wilson
Disappointed by the spray tip
Well made steel container, it looks like a really good tool. The problem we had was the nozzle wasn’t manufactured correctly and the spray pattern was terrible. We were sealing stamped concrete and it made a mess. Ended up on hands and knees blending the sealer so there weren’t any streaks. Disappointed to say the least.
Scritto da: Brian Welch
Cheap, Sturdy, NO-FRILLS Workhorse of a Sprayer. (Comes with fan nozzle. See review if you want a cone nozzle)
A good, simple sprayer. Like many other reviewers, I have been through several cheaper, plastic sprayers. This one I have been using for over a year and it works very well. There are 2 issues I have found with it. 1. There is no pressure relief valve. This isn't really a fault, just a "wish it had one" kind of thing. If I need to release pressure, I lay the tank down on its side so the hose is at the top, and let it bleed off. 2. The nozzle produces a fan-shaped spray, and I often want a conical spray for spot application. The fan nozzle does a great job applying evenly in sweeps. If you're applying to a large area, the fan works great. I have not been able to find a brass conical spray nozzle that will fit this sprayer, so I made one. HERE IS HOW I FIT A CONICAL SPRAY NOZZLE TO THIS SPRAYER: You will need: 1. Chapin 66000 Brass Adjustable Cone Nozzle w/ Viton (available here on Amazon) 2. "1/4 in MIP x Close" Brass Pipe Nipple. About $3 at any decent hardware store. (I used a Watts LFA740) 1. Screw the Chapin cone nozzle onto the brass pipe nipple. You may want to use teflon tape for a tighter seal, since this connection will be permanent. 2. Unscrew the fan nozzle from the wand on the sprayer. 3, Screw the cone nozzle/brass pipe nipple onto the wand. 4. Voila! You now have a cheap, reliable sprayer with a cone nozzle.
Scritto da: DIY Guy
Works Perfect for Water-Based Concrete Sealer
Assembled easily and didn't leak. Works perfectly to apply water-based concrete Sealer with water-like viscosity. A tip is to be sure you charge it with enough pressure before spraying, and pump every so often while spraying. Working pressure is 40-60psig. Spray pattern will be bad at low pressures. Clean out immediately with clean water and allow to dry inverted (uncapped). Only 4* since it did not include a shoulder strap, which is needed for most any use.
Scritto da: Dorian K
Sprayers Delight
I was a moron buying those cheap (even not so cheap) plastic sprayers from the local home improvement centers. This sprayer is Very well built, looks like it will last forever. No pressure release, just lay on side with the supply line on the high side. Squirts out all the air in about 20 sec, no prob. One year update: You may want a different spray tip. The fan tip is probably great for spraying concrete curing emulsion but not so good for bug spray. Can't say which tip to get, haven't ordered one but will soon. No rust yet. I'm careful not to bang it around so as not to compromise the paint/galvanized finish. Don't leave it full, the pump rod will rust, probably a standard good housekeeping practice anyway. The pump started leaking, not holding pressure. Found out earwigs (what a stupid name for a bug) got into the air holes in the top of the pump and made a mess. The pump dis-assembles easily. The screw part at the top just pops off the whole bottom section. There were bits of bug carcass throughout, especially the valve at the bottom of the pump. Once re-assembled with some synthetic grease, worked like new. So just don't leave it laying around. Still love the unit, but godda get another tip.
Scritto da: Southern_Yankye
Mack Daddy of Sprayers!
It took me a while to finally brake it out and use it but it was worth the wait. Wow, I've owned a lot of different sprayers in my time, most usually left me disappointed, but this sprayer is in a class of its own, I wish I would have done this along time ago. Its sturdy, the spray handle and nozzle are solid, and it holds 3 gallons which I like. I can't say enough about the all around construction of this unit. If you are thinking of purchasing this unit don't wait, buy it, you won't be disappointed! The last sprayer you will ever have to buy, I know it is for me.
Scritto da: Amazon Customer
Good durable tank for the money.
Good basic spray tank for a good price. Someone complained about not having a pressure gauge; but really? If you want a pressure gauge, then pay the extra money for one. I’ve used tanks like this for the past 40 years, and I am grateful for an affordable quality tank!
Scritto da: johnnytolbert
good sprayer
works well and i will buy again
Scritto da: Rick Z.
Need different seal for use with concrete sealer!
Sprayer worked well with the concrete sealer but the large rubber seal failed at the end. Seal not compatible for use with concrete sealer, will have to find one that is.
Scritto da: George
Solid tank
This container is solid and does great job spraying water. As other reviewers mention there is no pressure release valve but can do done when laying it on its side with hose outlet upwards. I would have given 5 stars if the cone spraying nozzle attached as is but it doesn't. You need a 1/2" coupler to attach it.
Scritto da: Mike D
Nice unit but very poor packaging and badly damaged
While I haven’t used the product yet the box appeared to be in great shape. Upon opening the product it looked like it was thrown off a building as it was smashed in several areas. I doubt it will impact performance but very disappointed. Overall looks of the product however is very nice and nozzle etc looks like it may be a quality product. I’m going to buy another one, not sure which and hope it doesn’t look like the one I got when received. I haven’t reached out to vendor either so not their fault!
Scritto da: Amazon Customer
First time I've changed my rating
First impression of the product was it was well made. However, after using it three times, the wand broke in half at which time I realized how thin the wand is. The valve leaks all over your hands and the spray volume is far to great. Had hoped that made in the USA ment built with pride like it used to. Disappointed.
Scritto da: Amazon Customer
Highly recommend for home use
I loved this sprayer, I have used the Chapin 1949 in industrial setting so I got this hoping it would be as reliable for home use. I was excited to find that it held up to my expectations. It worked almost exactly as well as the more expensive model, check that all seals and valves are completely tight before using as they arrived barely hand tighten on my unit. I would highly recommend.

Prodotti correlati

hot
Smith Contractor 190217 Spruzzatore da 3 galloni per il controllo delle infestanti, la pulizia e la fertilizzazione
3.6/5

€ 153.14

Smith Contractor 190217 Spruzzatore da 3 galloni per il controllo delle infestanti, la pulizia e la fertilizzazione
3.6/5

€ 153.14

hot
Chapin International Sprayers Choice 25214 Spruzzatore con serbatoio in plastica da 2 galloni, bianco traslucido
2.7/5

€ 103.97

Chapin International Sprayers Choice 25214 Spruzzatore con serbatoio in plastica da 2 galloni, bianco traslucido
2.7/5

€ 103.97

hot
No-Spill 6132 Gruppo ugelli per taniche di gas (SOLO per taniche No-Spill® 2010 e successive)
3.3/5

€ 38.95

No-Spill 6132 Gruppo ugelli per taniche di gas (SOLO per taniche No-Spill® 2010 e successive)
3.3/5

€ 38.95

hot
Spruzzatore a zaino senza fili Greenworks 40V (4 galloni/5 ugelli/spruzzo da 25 piedi) per diserbo, irrorazione e pulizia, solo strumento
4.1/5

€ 424.91

Spruzzatore a zaino senza fili Greenworks 40V (4 galloni/5 ugelli/spruzzo da 25 piedi) per diserbo, irrorazione e pulizia, solo strumento
4.1/5

€ 424.91

hot
Chapin International 1002 Spruzzatore multiuso da 48 once, spray da fine a grossolano, spruzzatore rosso/bianco casa/giardino
3.4/5

€ 58.42

Chapin International 1002 Spruzzatore multiuso da 48 once, spray da fine a grossolano, spruzzatore rosso/bianco casa/giardino
3.4/5

€ 58.42

hot
Smith Performance Sprayers 182675 Viton Pump Service Kit per 2 e 3 galloni Poly Sprayer
3.7/5

€ 40.05

Smith Performance Sprayers 182675 Viton Pump Service Kit per 2 e 3 galloni Poly Sprayer
3.7/5

€ 40.05

hot
Chapin International 1003 48 once Farm and Field Hand Sprayer per fertilizzanti, erbicidi e pesticidi, rosso/bianco
3.5/5

€ 50.46

Chapin International 1003 48 once Farm and Field Hand Sprayer per fertilizzanti, erbicidi e pesticidi, rosso/bianco
3.5/5

€ 50.46

hot
Corpo ugello Quick TeeJet serie QJ300 CropCare 22252312375NYB, raccordo a T da 3/8"
4.1/5

€ 31.01

Corpo ugello Quick TeeJet serie QJ300 CropCare 22252312375NYB, raccordo a T da 3/8"
4.1/5

€ 31.01

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu