Caricabatteria da auto iOttie Easy One Touch Wireless 2 Qi Supporto per telefono da cruscotto per iPhone, Samsung Galaxy, Huawei, LG, smartphone

Brand:IOttie

3.3/5

€
78.88

Compatibilità custodia: la funzione di ricarica wireless funziona con dispositivi compatibili Qi e custodie fino a 6 mm di spessore. Per un'esperienza di ricarica wireless più efficiente, ti consigliamo di collegare il telefono senza custodia. Forte aspirazione: la base di montaggio si attacca al tuo veicolo tramite una ventosa in gel appiccicoso super forte. Easy One Touch Wireless include anche un Dash Pad per fornire alla ventosa una connessione sicura su cruscotti testurizzati. Braccio telescopico: il braccio telescopico ruota su un arco di 260° e può essere esteso da 6,5" a 11", consentendo di trovare la posizione di visione ottimale. Piedino inferiore regolabile: il piede del supporto può essere sollevato e abbassato per accogliere telefoni di varie dimensioni. Questo aiuta ad allineare le bobine Qi per un'esperienza di ricarica efficiente. Meccanismo Easy One Touch: premi i bracci laterali di bloccaggio con un rapido movimento con una sola mano e posiziona il telefono contro il pulsante di attivazione. I bracci del supporto si chiuderanno automaticamente, tenendo saldamente il tuo dispositivo mentre guidi. Monta o rimuovi il tuo telefono in pochi secondi con il meccanismo brevettato Easy One Touch. Certified Made For Google: questo prodotto è stato certificato da Google per funzionare con i telefoni Google Pixel compatibili con Qi, inclusi Google Pixel 3, 4, 5, 6 e 7.

Quantity

Aggiungi al carrello Compra subito

EAN: 0857199008245

Categories: Cellulari e accessori, Accessori per cellulari, Caricabatterie e adattatori di alimentazione,

Brand	IOttie
Color	Black
Compatible Devices	Smartphones
Compatible Phone Models	Compatible with all Qi-enabled mobile devices including iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, iPhone 13 Mini, iPhone 12 Mini, iPhone 12, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone SE (2020), iPhone X, iPhone Xs, iPhone Xs Max, iPhone Xr, iPhone 8, iPhone 8 Plus, Samsung Galaxy S8, Samsung Galaxy S8 Active, Samsung Galaxy S8 Plus, Samsung Galaxy Note 8, Samsung Galaxy S9, Samsung Galaxy S9 Plus, Samsung Galaxy Note 9, Samsung Galaxy S10, Samsung Galaxy S10e, Samsung Galaxy S10 Plus, Samsung Galaxy Note 10, Samsung Galaxy Note 10 Plus, Samsung Galaxy S20, Samsung Galaxy S20 Plus, Samsung Galaxy S20 Ultra (5G), Samsung Galaxy S20 FE, Samsung Galaxy Note 20, Samsung Galaxy Note 20 Ultra, Samsung Galaxy S21, Samsung Galaxy S21 Plus, Samsung Galaxy S21 Ultra, Samsung Galaxy S22, Samsung Galaxy S22 Plus, Samsung Galaxy S22 Ultra, Google Pixel 4, Google Pixel 4 XL, Google Pixel 5, Goo
Country of Origin	Korea, Republic of
Customer Reviews	4.3 4.3 out of 5 stars 5,494 ratings 4.3 out of 5 stars
Item model number	HLCRIO142
Item Weight	7 ounces
Manufacturer	iOttie
Mounting Type	Dashboard
Other display features	Wireless
Product Dimensions	7.4 x 5.2 x 3.3 inches
Special features	Wireless Charging, Adjustable
Whats in the box	Dual Charger, Phone Mount, Dashboard Pad

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Robert Osorio

Surprisingly good build quality and easy one hand operation.

I've had this for four days so far, but I've been on the road a lot, and I am very happy so far. I actually bought two versions: one with the suction cup mount for my car, and one with the CD slot/vent clamp for my work truck. I've gotta say, they work well. The build quality is actually very good. Wireless works as expected (10 watt charge rate - see below). The one handed feature is VERY nice. My old mount required me to use two hands. This one you can place and remove the phone with one hand and it's quite securely locked in. In my photo, you can see a button in the center of the mount. When you put the phone in the mount, it presses against that button, and that triggers a spring mechanism that clamps the phone. To release the phone, you squeeze the buttons sticking out on either side, which also re-arms the spring mechanism. Very quick and simple to use. The suction cup, which is usually flimsy on these things, feels very thick and robust. How well it holds up in hot Florida summers will take time to tell, but I bought another, non-wireless version of this mount, as a spare for the RV and also to steal the suction cup arm off it if needed. If you notice in my photo below, I have the mount resting on the dash. People always complain about the suction cup giving out. Well if the phone is unsupported, and it just bounces around at every bump in the road, that arm is going to act like a lever and pry it off. I opted to attach the mount to the window so I don't discolor the dash, but it can be used on the dash. There's also a disc included with that strong 3m double stick tape (the tape they use on Go Pro mounts) that you can use on dashes with rough textures: you stick the disc to the dash and then attach the suction cup to the disc. The vent clip mount actually works well and is what I used on the work truck. I generally don't like using a vent clip, but this one grabs really tight, and the truck has some beefy vent slats. The CD mount, which at first I was skeptical about, actually works very well if you bother to read the instructions (which I didn't at first) and realize there's a lever on the bottom that you need to turn to lock it into the slot tightly. The CD slot mount wasn't really practical on any of my cars as it would block the entertainment center display, but a good idea for an older car with a more traditional radio. The charge rate is not very fast - it's 10 watts, which is enough to keep the phone up. But if the phone was nearly dead and I needed a fast recharge, I have a high speed plug-in charger in the glove box. That charge rate is pretty standard for car wireless chargers, and the Pixel 6 only supports up to 15 watts wireless charging on 3rd party chargers. Only Google's proprietary wireless charger runs at the higher 23+ watts. ------- Followup 8/3/22: I had to stop using the wireless charging feature because it interferes with the Bluetooth between my phone and the car entertainment system. I can't say this is a problem with the charger as I've Googled the issue and not found any known issues with wireless chargers and BT except for iPhones in a few rare cases (I'm using a Pixel 6), so it may be the entertainment system in my car (2012 Lincoln) that's sensitive to it. BT works but while playing a podcast or music, the pause button will come on and off on it's own, repeatedly. I can actually see the pause indicator on the entertainment system display coming on and off, so I know it's not an audio issue. Disconnecting power from the charger makes it go away. I tried raising the charger higher off the dash and it didn't help. Moving it to the left of the steering wheel seemed to help, but that's not a comfortable location for me. So just a head's up, if your BT playback is acting up, try disabling the charger. I actually switched the unit out for the non-wireless charging version I bought as a spare, and I'm using the wireless charger in my 2013 Yukon with no problem. I do love the cradle itself. It's a very good design, and the one handed operation of placing the phone in the cradle and removing it make this well worth it. Pity I can't use the charger in my car though.

Scritto da: Samy

CD Mount Style is #1 of Car Phone Mounts

I have to say this is the best mount style of all the options out there. I've had the dash/windshield style previously for 3 years, but overtime the heat has either made the suction cup release or even the black 3M sticky for the dash. I don't like the vent mount because it wobbles and I don't like the cup holder mount because mainly you're looking to far away from where you should be, not to mention it takes a cup holder. The CD mount is secure and is at the right line of sight. The only unfortunate thing is that it blocks my screen, which I really only mind the most when I need to use the back up camera. I just simply tilt it up or rotate to horizontal to get a full view when backing up. I previously had a wireless charger style and once again purchased the wireless charger option. This is very convenient to quickly put your phone on the mount and charge without hassling with the wire. The CD mount also conveniently puts the phone near the vents to cool if necessary. I also routed the charging cable with stickies to keep it organized.

Scritto da: George

So far so good

Fast wireless charging is very slow compared to wireless charging. My wired fast charger does 45 watts, this does 10 watts. Before i could charge my phone at least 30 percent on a 10 minute drive, now only goes up a couple percent the same drive. May or may not be worth the trade off to you. Only other criticism is that the vent clip doesn't hold as tight as I'd like (2010 camaro) so it swings around a bit on tight turns. Aside from that, this is everything I love about the old one without the charger built in. Physical button to close the clamps on your phone, buttons to push to open and remove your phone.

Scritto da: Fenix8452

Pixel 3 owner here: get this one

Pixel 3 owner here, so if you care about that specific phone, read on: So, big question, does this "fast wireless charge" the phone? Answer: It won't display the "fast" part, but my tests show me that I am getting the 10w speeds. [EDIT/UPDATE: I found why I was having inconsistent results, heat. I have it mounted in the windshield and it's summertime, I found both the device and the phone quite warm while it was having trouble charging quickly. I directed one of my vents at it with cold AC, I now get 1200mah charging rate consistently. I left the original review below but wanted to add this.] Full answer: I bought this because I have worn out my USB C port. I get in and out of my car a lot for a second job, and use GPS frequently. I needed something that could keep up the charge with GPS and screen running, but Google hampered their own device by going with some proprietary standard instead of the normal. I've been waiting nearly 2 years for a cheaper wireless charge device, but they disappointed me. Suddenly, and without fan-faire, this exact brand shows up on the Google store, and even more so it's claiming 10w charge ability. Looking at the specs of the Google stand, it says the same rate. Great, finally a less expensive option. But in reading reviews here, it's all over the place on if it fast charges or not. I took a chance. And I'm slightly confused by the end of my testing. But, the bottom line, most of the time I'm charging at about a 1000mah rate using Ampere to measure. But sometimes it measures much lower, even lower than 500mah. And sometimes the percentage of my phone battery display doesn't make sense with either of them. Let me explain: I've connected it, had it indicate wireless charging, and in this example it was at 86% already. Ampere reported 120mah. The lock screen told me it was going to take 47 minutes to reach full charge. I didn't touch it, just let it run, but with the screen off so I couldn't see Ampere. Then it steadily ticked upwards on percentage and down on time. Suddenly it was at 88% and 36 minutes to full charge, but it had been only 2 minutes. Then it was at 89% and 109 min to full charge, then 90 with 15 min to full charge. Once in a long while, it'll say charging, but still tick down while in use or stay steady while idle. Taking it off the mount and putting it back on results in much faster charging. Most times I can start it charging, and it will charge at a rate of about 7% in 10 minutes of driving with the screen off. That puts it on par with the fast wireless charger by Google. I don't know why I see the inconsistency, however I can state that this regularly pushes better than any other wireless charger I've tried that's not made by Google. The few moments of oddity, and that it won't say fast-charge, are strange for sure, but I'm blaming Google on that one more than this product. My educated guess is that Google pushed some update which allows some chargers to put out similar charge to their proprietary wireless charger, but don't want to make a big deal about it since it was a bad choice to begin with. The non-google Pixel 3 stuff: - It's an excellent windshield mount, utterly unmovable without a lot of dedicated force. - The one-hand clamp works fine, although I wish it didn't snap shut like it does. - The included charger works fine, the extra port is low power but work ok for smaller devices like bluetooth headsets.

Scritto da: Steps Ahead Fan

Absolutely the best cradle I've ever had

I recently upgraded my phone from a wired to a wireless charging one (a Google one at that) so I needed a wireless cradle for my car. This one seemed to fit the bill, plus I didn't see many (any) out there which supported the Google phones apart from this one, so it was a win-win already. The cost was more than I've ever paid for a cradle, but when it arrived I can honestly say that it's as though nothing has not been well thought out. The packaging was superb - 100%. I've only had this cradle for a couple of weeks, and so I know it's too early to be conclusive, but I felt I really needed to leave a review because a few of the one-star reviews did put me off, and I feel this needs correcting, as far as my own personal experience goes. It is in regards to the connection method. Having read the one-star reviews and put off by the possibility that the cradle wouldn't stay put when connected to a vent slat, I chose to use the CD-Holder instead. Whilst that worked perfectly, in my case the phone then blocked most of my navigation screen (which also is a rear view camera) and so I wasn't too happy about that. So I tried the vent holder (my previous cradles were vent holder types) and was again, blown away.... DO NOT BELIEVE all the one star reviews claiming the vent holder isn't secure. In my case, I cannot believe how SOLID the unit is when held using the vent holder. My advice is to make sure you push the vent-holder ALL THE WAY until it cannot go any more. And do that VERY, VERY SLOWLY because the vent holder tongs are extremely tight, and there's hardly any gap between, so do it very slowly so that you don't put too much sudden force onto your vent slat. As I say, I now have the very best cradle I've ever had, it holds my phone 100% and does not move or vibrate AT ALL during driving. My only complaint about the device is that the USB connector cannot go fully into the unit, it goes approximately 3/4s of the way in, so perhaps a bit of a manufacturing fault. Oh yes, and the charging light is a bit superfluous as you cannot see it when you have a phone on the stand and the phone obscures the light! Still, 10/10!

Scritto da: Matthew J. Major

Great functionality

Easy to place and remove phone. The arms automatically close onto the phone once you push it onto a mechanical button on the surface of the cradle. Easy to place in one handed which is what I wanted. Wireless charging means no messing with cables when you should concentrating on traffic etc. The best phone holder and charger I have ever had in the car. Fits to windscreen exteremly securely. It's winter so cannot comment on summer performance at staying on the screen. Adjustment of arms very flexible and easy to do. I want one for my desk but they are expensive.

Scritto da: Ricky Comber

Excellent holder in CD mode. Vent mode not great for me

I ordered the CD/vent holder as I’m not keen on having obstructions on the windscreen and dash. The air vents in my car run vertically and unfortunately this holder isn’t great on vertical vents. I’ve attached it as tight as possible but any bump in the road and it slips. The CD holder on the other hand is excellent! Very sturdy and doesn’t move at all. As my phone is quite large it does cover a few of the air controls but this isn’t a major problem for me. Attaching my phone to the holder is quick and easy and the cable is the perfect length for my car. I would definitely recommend this holder but I’d think where you want to mount it first and what type of vents you have etc...

Scritto da: Amazon Customer

Very stable and secure

Easy to put on and take off the phone (Samsung Note 10 plus). Included charger gives enough power through quite short micro USB cable, but additional USB connector on the charger gives only 0.5A which is pretty much useless by today standards. If you want to use longer cable to power this phone holder you gonna need different charger. Very limited swivel makes hard to find comfortable phone position. Dispite some flaws it's very good phone holder and fast wireless charger.

Scritto da: Liam

Great product

Nice and easy to use. Looks good and very sturdy, changed the cable for a 6ft charging lead which looks better as there isn’t any hanging wires. Only problem is the charging output isn’t the same but that’s expected