Bohning 1308 Ferry-L-Tite Cool Flex

Brand:Bohning

3.7/5

24.43

Boning cool flex ferry-l- aderisce a punti e inserti agli alberi in carbonio. Questo cemento hot melt a bassa temperatura è resistente, elastico, impermeabile e reversibile al calore. Un adesivo super forte, a bassa temperatura di fusione, specificamente formulato per frecce in carbonio. Facile da applicare. Un bastoncino da 12 grammi farà ca. . 144 inserti.

Bastoncino da 12 grammi. Calore reversibile. Aderiscono punte e inserti alle aste in carbonio. Hot melt a bassa temperatura. Questo prodotto è fabbricato negli Stati Uniti. Bohning Cool Flex Ferry-L aderisce punti e inserti agli alberi in carbonio. Duro, elastico e resistente all'acqua.
Brand Bohning
Brand ‎Bohning
Brand Name ‎Bohning
Color Blue
Color ‎Blue
Compatible Material Ceramic
Compatible Material ‎Ceramic
Customer Reviews 4.7 4.7 out of 5 stars 514 ratings 4.7 out of 5 stars
Included Components ‎Hunting, Airsoft and Paintball;Archery - Youth;archery-equipment
Item Dimensions LxWxH ‎5.75 x 4.06 x 1.38 inches
Item Form Stick
Item Form ‎Stick
Item Package Dimensions L x W x H ‎5.83 x 2.6 x 1.38 inches
Item Package Quantity ‎1
Item Weight ‎0.05 Pounds
Manufacturer ‎Bohning
Material Other
Material ‎Other
Model Name ‎1308
Model Year ‎2011
Number of Items ‎1
Package Weight ‎0.03 Kilograms
Part Number ‎47174
Sport Type ‎Archery
Suggested Users ‎Unisex-adult
Warranty Description ‎Manufacturer warranty
Water Resistance Level ‎Waterproof

3.7

13 Review
5 Star
79
4 Star
12
3 Star
6
2 Star
1
1 Star
1

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Allen Barber
Works
Works
Scritto da: Southeast VA
Crossbow nocks & inserts
I'm using this on my Zombie Slayer bolts to hold the nocks and inserts in place. Since the nocks are plastic, the easiest way to use this is melt a little in a metal bowl. I cut a chunk off and used a metal measuring spoon. Then, heat up the spoon with a heat gun until it turns into liquid. Last, just dip the end of the nock in and quickly set it into the end of the bolt. I have to do this to keep the Alpha nocks in place. Holds both nocks and inserts tight, but gives you the ability to remove them later more easily than using epoxy.
Scritto da: d_rek
Works night and day better than the yellow bohning hot melt.
Second time trying hot melt. First time I used the yellow bohning flex tite and all the inserts pulled out. I redid half a dozen arrows using this hot melt glue. Shafts and inserts were cleaned and prepped properly with denatured alcohol. Glue was heated up using a torch and applied generously to insert, which was then put over heat to make the glue fluid. Held insert with a pair of pliers and inserted into shaft with screwing motion to evenly distribute the glue. Plunged tip of arrow with freshly installed insert into glass of cool water. Removed excess glue after it cooled. Every single insert has stayed firmly in the shaft. Good stuff.
Scritto da: Kurt
Does not work
I installed a dozen titanium inserts with a liberal amount of this product into Easton axis 4mm arrows. On my first time at the range 50% of my inserts stayed in the target and were not recoverable. I took them out and tried again making sure they were totally covered and fully hardened before trying again but found the same result. I would not recommend using this product with any insert that you want to keep.
Scritto da: Allan S.
Best Hot Melt For Arrows
Hands down if you intend to use hot melt glue for your arrow points, this is the hot melt glue to go with. The biggest advantage to this is that it melts very easily, and thus glides onto the point very smoothly. It also means you don't need to heat the point up much to get the glue to melt. This makes it super easy to get a very light and smooth coating around the arrow, with very minimal excess overflow of glue coming off when sliding the point into the shaft. This means you don't have to clean up the shaft of excess globs of glue. But what little you may have to clean off, also comes off super easily so this glue makes everything a breeze when it comes to putting in arrow points. Best hot melt glue for sure.
Scritto da: Nathaniel Barwell
The photo for this product listing is terrible
I realized after I glued my first dozen arrows that manufacturers who recommend cyanoacrylate / superglue for gluing inserts into carbon shafts also have a recommended way to remove them: pop the nock out, drop in a drill bit, and slide hammer the insert out. So I'm not going to use hot melt on new shafts because I'm tired of having to re-glue them.
Scritto da: 1bullet1kill
Traditional Archery Staple
The perfect glue for installing inserts and keeping field points and broadheads in correct position. All I use.
Scritto da: Tim808
Easy to remove components
Easy to remove! Has been holding the inserts for the arrows i use with my compound bow. I’ll eventually go to an epoxy when my arrow lengths and bow are tuned/finalized
Scritto da: A Rooseite.
Good product at a good price
Was what I wanted at a very good price. I am happy with my purchase
Scritto da: CycleGuy
Great product, best Ferrell adhesive I’ve ever used.
Simple to use, rock solid adhesion. Ensure inside of arrow shafts are prepped properly before using.
Scritto da: Mr Tea
Easy and effective
Easy to install and holds up well
Scritto da: Lafy
Better then glue
Works like they say
Scritto da: Jon C.
Five Stars
Works great. Easy to apply

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart