Blocco della staffa del morsetto Onguard

Name: Blocco della staffa del morsetto Onguard
Brand: ONGUARD
SKU: 0757183497669
Price: 29.43 EUR
Availability: InStock

Brand:ONGUARD

2.7/5

€
29.43

Staffa di montaggio che funziona con tubi per biciclette di qualsiasi dimensione (22 mm-80 mm). Il design versatile consente una varietà di opzioni di posizionamento: tubo obliquo, tubo superiore, reggisella, offset, qualunque cosa sia necessaria sul telaio per eliminare le interferenze con cavi, gabbie e altri accessori. L'interfaccia in gomma morbida non danneggerà la finitura della bici.

Quantity

Aggiungi al carrello Compra subito

EAN: 0757183497669

Categories: Sport e tempo libero, Sport e forma fisica, Ciclismo, Accessori, Lucchetti per bici, Lucchetti a U,

Una staffa di montaggio universale per lucchetto a U che funziona con camere d'aria per biciclette di qualsiasi dimensione (22 mm-80 mm). Il design versatile consente una varietà di opzioni di posizionamento: tubo obliquo, tubo superiore, reggisella, offset, qualsiasi cosa sia necessaria sul telaio per eliminare le interferenze con cavi, gabbie e altri accessori. L'interfaccia in gomma morbida non danneggerà la finitura della bici. Progettato per adattarsi a grilli tra 11 mm e 14 mm. Compatibile con i lucchetti a U della serie Onguard 8000. Grado di sicurezza 0.

Brand	ONGUARD
Brand	‎ONGUARD
Brand Name	‎ONGUARD
Color	Black
Color	‎Black
Customer Reviews	3.6 3.6 out of 5 stars 283 ratings 3.6 out of 5 stars
Included Components	‎Lock bracket and hardware
Item Dimensions LxWxH	6 x 5 x 1 inches
Item Dimensions LxWxH	‎6 x 5 x 1 inches
Item Package Dimensions L x W x H	‎6.5 x 5.12 x 1.81 inches
Manufacturer	‎OnGuard
Material	Rubber
Material	‎Rubber
Model Name	‎Multi position mounting bracket
Number of Items	‎1
Number of Pieces	‎1
Package Weight	‎0.07 Kilograms
Part Number	‎8053
Recommended Uses For Product	Cycling
Recommended Uses For Product	‎Cycling
Shape	‎U Shape
Sport Type	‎Cycling
Suggested Users	‎Unisex

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Anon

The best bike mounting hardware I've come across (which isn't saying much)

The Onguard clamp bracket is the best bike mount I've used. It holds the lock securely in place, the lock releases and attaches easily and, unlike the Kryptonite mount, I don't bang my knuckles every single time I take the lock out of the mount. It gets bad reviews here I think for two main reasons: 1) Despite the claim, it doesn't work equally well with all Onguard U-locks. I've found that it works great with the Pitbull Mini DT only. Other Onguard U-locks I've owned have had slightly narrower mounting hardware around the shackle. This makes it so the lock rattles a lot in the mount when you're riding and I think leads to premature breaking. Only guess why Onguard doesn't fix this on the cheaper U-locks is cost, but it's pretty annoying. I've got two locks at home that are basically useless to us, just because I can't mount them properly. 2) Even when you're using the lock with a Pitbull Mini, the durability of the mount isn't the best. I've been using these for quite a few years and find I'm getting somewhere around 18 months on average before part of the clamp cracks or breaks off. I'd love it if it lasted loner of course, but I figure $6-$7 every year or two for the convenience of never forgetting my lock or having to carry it in a bag is worth it for me.

Scritto da: Sahil Mahajan

Does not come with the spline that goes over the lock

I already had the U-lock which has a spline that goes on top of the U-lock rod. If you don't have that spline on your U-lock and even if it does it might be of different size so that will make this bracket useless for mounting the U-lock. I have one from previous U-lock from Onguard itself but still it has problem fitting within the mounting space. Not the best design. They should have sent a spline attachment along with the bracket for it to work properly. Also, the bracket doesn't look very sturdy.

Scritto da: George thayer

It work

I damage the first one so I had to buy a replacement it works great it holds the the bike lock with no problem at all thank you very much

Scritto da: "philippio"

It's cheap and the low price is reflected in the quality...

There is ONLY 1 positive criticism of this U-Lock bracket: it's cheap. But here are all the reasons why the price point reflects the quality (or lack thereof): -The brackets that "hug" the frame of the bike are held on with 2 screws. No torque value is provided for installing the screws. Too loose and the bracket rotates around the frame post when you attach/remove the U-lock using the spring-loaded release clip. If you screw them in too tight, the cheap plastic brackets crack. -The spring on the release clip is very rudimentary. After a few attachment/removal cycles of the U-lock, the spring weakens and the U-lock rattles with every bump. -The "slot" opposite the spring clip is too weak and brittle. After a few attachments of the lock, it will inevitably fail. This is a catastrophic single point failure (i.e. attachment bracket becomes unusable and needs to be replaced). In my experience, the failure most often occurs as you are attaching the lock in place (that's the best scenario). If this slot weakens slowly (i.e. slowly progressive fracture), you could end up in a situation where it fails while holding the lock in place as you're cycling. Depending on the location where the bracket is attached onto the frame, you could injure yourself or damage your bicycle's components. -The bracket is significantly worse in cold temperatures; brittle, cheap plastic becomes too weak to support the weight of the metal U-lock. I ride year round in Chicago down to temperatures of -18F. One or two replacement brackets I bought failed after less than a week of daily use. Conclusion: if you don't mind spending the $8 for frequent replacements, it's the only bracket around for Onguard U-locks.

Scritto da: Norman Harris

The Replacement product works as it is supposed to.

This is a great bike lock holder for the OnGuard Pitbull until it wears down. It allows you to clip your lock to your frame and ride off, and I like it. Its only issue is that the plastic wears over time, usually two or three years and it makes it harder for the spring to secure your lock on your frame, and the screw positioning the lock starts to loosen after a couple of years of cycling leading to the need for this replacement product. That is why I bought this and it was my second time obtaining a replacement.

Scritto da: Kelsey

I like having a clamp bracket for my u-lock

I like having a clamp bracket for my u-lock. It makes it really convenient to keep on your bike when you are riding. This is the best way I have found to store my u-lock on my bike while I am not locking it to something. Unfortunately, the clamp does not hold up for that long. It breaks a few months after using it every day. The plastic breaks and then it won't hold the lock in place. I keep buying them again and again because I like that it holds my lock on the frame of my bike. I just wish the plastic would break so easily.

Scritto da: Chevy Head

Locked up

I have had it a couple of months; so far, so good.

Scritto da: Lance

Right item, right hardware, mediocre design.

I was a bit worried about purchasing this when I heard some people mention that they didn't receive the same type of bracket lock as pictured and that not all hardware was included. I didn't have either of those problems when I made my order. Right piece of equipment, all hardware included. My lock is now back on my bike. I'm not convinced this new one won't break like the old one did, as the product's design definitely makes it susceptible to breaking if there's a lot of vibration while riding (like going over rough terrain). But hey, better than having to sling my bike lock around my handlebars while riding.

Scritto da: O

A lock that works¿

This product is useless. Doesn’t fit with some onguard pit bull locks as stated.

Scritto da: John

Item is different size from original

Does not fit all 8000 series u lock, as stated in product information

Scritto da: Tony Di Nino

Total garbage, DO NOT BUY!

I bought this product after the original clamp that came with my u-lock broke. That should have been a sign for me, but I figured that I just got a defect. I used the new clamp for just over a month and it worked great - I must say it has a convenient design. But, around the two month mark after going over a small bump the plastic totally snapped, rendering it useless. If they built the clamp out of stronger materials it would work great, but at the moment it's a waste of money as you'll be having to replace it every few months. DO NOT BUY!

Scritto da: Liliana C.

ya se me rompió

me duró muy poco, yo tengo un candado en U extra grande, el original se me rompió después de unos 12 meses, compré este como repuesto, y hoy 23 de marzo se me volvió a romper

Scritto da: nowisthekey

3 month review - so far so good

Been using it almost daily. No issues at all so far. Hope it lasts