Ancor 121510 Cavo duplex, 14/2 AWG (2 x 2 mm2), piatto - 100 piedi, nero/rosso 100 piedi 14 Awg, piatto duplex nero/rosso

Name: Ancor 121510 Cavo duplex, 14/2 AWG (2 x 2 mm2), piatto - 100 piedi, nero/rosso 100 piedi 14 Awg, piatto duplex nero/rosso
Brand: Ancor
SKU: 091887123081
Price: 106.62 EUR
Availability: InStock

Brand:Ancor

3.9/5

€
106.62

I cavi duplex ANCOR sono realizzati per superare i più elevati standard di cavi per barche UL con trefolatura ultra flessibile (tipo 3/classe K) per resistere alla fatica dovuta a vibrazioni e flessioni. La giacca esterna è realizzata per una facile rimozione e offre la migliore resistenza all'abrasione disponibile. L'isolamento in vinile premium proprietario di ANCOR rimane flessibile anche in condizioni di freddo estremo e resiste all'acqua salata, all'acido della batteria, all'olio, alla benzina e alle radiazioni ultraviolette. L'isolamento esclusivo è valutato a 600 volt, 105° C a secco e 75° C I conduttori interni sono correttamente codificati a colori secondo gli standard ABYC.

Quantity

Aggiungi al carrello Compra subito

EAN: 091887123081

Categories: Sport e tempo libero, Sport e forma fisica, Canottaggio e vela, Barche e attrezzature, Materiale elettrico, Filo,

L'isolamento in vinile premium è valutato a 600 volt, 105 gradi C asciutti e 75 gradi C bagnati, rimane flessibile anche in condizioni di freddo estremo (-40 gradi F/C) e resiste all'acqua salata, all'acido della batteria, all'olio, alla benzina, al calore, all'abrasione e alle radiazioni ultraviolette. Supera tutti gli standard UL 1426, US Coast Guard Charter boat (CFR titolo 46) e ABYC. La cordatura ultraflessibile di tipo 3 resiste alla fatica dovuta alle vibrazioni e fornisce una maggiore protezione contro la corrosione. Prodotto da singoli fili di rame e stagnato per funzionare negli ambienti marini più difficili.

Batteries	1 Unknown batteries required.
Brand	Ancor
Color	Black/Red
Country of Origin	USA
Department	Boating
Gauge	7.0
Is Discontinued By Manufacturer	No
Item model number	121510
Manufacturer	Ancor
Material	Tinned copper
Number of Cable Strands	Multi Strand
Product Dimensions	6.5 x 6.5 x 5 inches; 4 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Mr Broadband

Got the best! No time to chince on boat wire.

So many wires to choose from, I decided to go Ancor. While I paid more for this, I got a quality marine wire. I like the sheathing and the wire is a good for most of my lights. I ran about 15-20ft on my pontoon for led lights and aux uses that will use 5-10A max I might be pushing it a bit, but most of these will not be on at the same time. I'd recommend searching for a wire gauge chart and determine your load. The material is good strong tinned copper for marine use. This is the industry wire of choice and it says it on the jacket. I have used just copper and it corroded just over a year later. I had to soldered the joints and silicone juice the connector to keep the corrosion out. That was a lot of work, so I decided to pony up and get the real deal. I just chimp and go. I live in the Midwest with fresh water and all four seasons and still copper only corroded. For a boat, this is not where I will ever skimp on money, ever again. First time ANCOR buyer.

Scritto da: Tanner Sanders

The best marine grade wiring!

Highly recommend this wiring for boats! It is high quality and easy to use. My 100ft roll has done me well!

Scritto da: Adam.

Marine grade wiring at a reasonable price

Product is as described. Redoing a pontoon boat and decided to give this brand a try. Will purchase more when needed from them. Comparable to more expensive suppliers at a budget friendly price.

Scritto da: EHN

Great wire!

I have been using spools of Ancor wire for many years in a saltwater marine environment. It is very easy to solder terminals to. It is also very flexible, which makes it easy to install. I have NEVER had an issue with the wire, even many years after the installation. To the people who have complained about the spools of wire not being marked every foot.... 1) that would add to the cost of the wire. 2) Either learn some tricks on installing wire, or hire a professional to do the job. 3) buy a Sharpie, and make your own foot marks.... I used some of this spool to install 2 runs on each side of a boat trailer for stop/ taillights. (Because those "trailer wiring harnesses" suck for longevity) I have no idea how much wire was used, (since it has no "foot marks") but I do know the wire itself will never have an issue.

Scritto da: Mr_Scary

Excellent Wire, I want more

This is the best wire I have ever used. I used it to wire a fuel pump switch, next I will be wiring 4 spotlights, and 8 flood lights to my pontoon upper and lower decks amongst other things. BTW I rolled it all out & measured it, there was 100FT. I see some say they got shorted, that's why I checked it. No shortage. Great for using outdoors, or on a boat.

Scritto da: David

Can’t beat already coupled and wrapped wiring!

Hate I didn’t get these sooner. Wiring the electrics in my van was made simple with this product. I put connectors on both ends and all that was left was to connect, route and label. Until I purchased, I was working with single wire which doubled the labor time. I had to measure each wire, then wrap for safety and maneuvering.

Scritto da: Shannon Numkena

Great Quality

If you are doing any wiring on a boat, this is what you should use. It is exactly like it says. Very high quality. The only thing I would say is just be sure you need the wires bound together. There were several times when I wish I had separate spools of black and white wires. I will be buying again.