Scuba Choice Scuba Diving Fin Spring Heel Strap con fibbie a sgancio rapido Medium

Name: Scuba Choice Scuba Diving Fin Spring Heel Strap con fibbie a sgancio rapido Medium
Brand: Scuba Choice
SKU: 0608866391845
Price: 75.54 EUR
Availability: InStock

Brand:Scuba Choice

3.5/5

€
75.54

-Viene fornito con un paio. -Taglie disponibili: piccola, media, grande. - Fibbie a sgancio rapido attaccate. -Materiale resistente. -Design confortevole. - Il passante in gomma consente di tirare facilmente la cinghia. - Solo lunghezza della molla: piccola - 7. ; Medio - 8; Grande - 9,5. Lunghezza dal centro della fibbia alla fibbia: piccola: 11, media: 12, grande: 13. -Misurazione dell'inserto del pomello della pinna (foro piccolo): diametro 14,6 mm. Misura dell'inserto della manopola della pinna (foro grande): 20,4 mm. Misura centrale del foro del pomello della pinna: 12,6 mm

Quantity

Aggiungi al carrello Compra subito

EAN: 0608866391845

Categories: Sport e tempo libero, Sport e forma fisica, Immersioni e snorkeling, Pinne per immersione,

Si adatta alla maggior parte delle pinne, tra cui Scubapro Twin Jet Max, Aqua Lung Rocket, Sherwood Triton, Tusa Imprex/Liberator/X-Pert Zoom/Solla e altro ancora. Solo lunghezza della molla: piccola - 7. ; Medio - 8; Grande - 9,5. Lunghezza dal centro della fibbia alla fibbia: piccola: 11, media: 12, grande: 13. Fibbie a sgancio rapido attaccate. Misura dell'inserto della manopola della pinna (foro piccolo): diametro 14,6 mm. Misura dell'inserto della manopola della pinna (foro grande): 20,4 mm. Misura centrale del foro del pomello della pinna: 12,6 mm. Al centro del perno sull'altro lato della pinna. Seleziona la misura del cinturino a molla più corta della tua misura da 0,5 a 1,5 (da 1,3 a 3,8 cm). Inserisci il tuo scarpone da immersione nella tasca della pinna, misura la distanza dal centro di un perno di montaggio della cinghia sul lato della pinna, attorno al tallone dello scarpone.

Brand	Scuba Choice
Brand Name	‎Scuba Choice
Closure Type	Buckle
Color	Black
Color	‎Black
Customer Reviews	4.4 4.4 out of 5 stars 364 ratings 4.4 out of 5 stars
Fit Type	Universal
Item Dimensions LxWxH	‎12 x 3 x 1 inches
Item Package Dimensions L x W x H	‎16.57 x 4.69 x 3.86 inches
Item Weight	‎0.81 Pounds
Manufacturer	‎Aqua Edge
Package Weight	‎0.38 Kilograms
Part Number	‎SCSHS-01-MD
Size	‎Medium
Sport Type	Scuba Diving
Sport Type	‎Scuba Diving
Suggested Users	‎unisex-adult
Warranty Description	‎30 day warranty against manufacturer defects

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Amazon Customer

Great Springs if you want a size medium.

Typical of Chinese manufacturers. Order a Large, get a medium marked as a Large. Ordered a large. Package is marked LARGE. Spring measures 8.25 inches.

Scritto da: paul foxgrover

Fits Sherwood Trek split fins

Fits Sherwood Trek split fins. I put a little silicon grease on the posts on the sides of my fins to make it a little easier to get the clip receptacle on the fins. Haven't got them in the water yet but seem to fit well.

Scritto da: Just a Guy Reviewing Things

Must have for any Diver!

If you Scuba Dive, you need to have these on your fins. These heel straps are a lifesaver when it comes to getting your gear on and off. Have you ever been trying to get on a boat while the surf is beating the crap out of you and you can't get your fins off to step on the ladder? Well, these heel straps will keep you from getting banged up against the boat for five minutes while you're trying to get those cheap factory fin straps undone. The spring also allows even heel pressure so your foot does not get a hot spot from uneven pressure. Make sure you get the right size for your foot. These springs are strong and if you have the wrong size, you will feel it. I have over 50 dives with the same pair. This review is on a replacement pair for my wife who did not take care of her first pair. Like all dive gear, make sure you give these heel straps a good wash. After all, the springs are metal, metal will rust over time if you spend any amount of time in the ocean. My wife did not take care of hers, the reasons why we had to get a new pair. There is nothing fun about heel straps breaking mid-dive, it will wear you out fast. So take care of your gear people. The heel straps should mount to just about any type of fin on the market. Simply remove the old trashy factory clips and replace them. Happy diving everyone, and stay safe!

Scritto da: Amazon Customer Beth

Need better quality control

I measured from peg to peg on my original straps and came up with 13", so ordered a large. They ended up being 14" peg to peg, so an inch longer than I want... no big deal, I'll swap them out for mediums, 1" shorter. Amazing exchange, got em next day, I was impressed. Verified it says medium on the bag, go to swap them out, and they are the EXACT SAME LENGTH! In the picture, my original straps at 13" (small peg hole to small peg hole), the middle set is the large @ 14" C-C, then the set on the right is the mediums at the same exact length as the large... Like I said, I did verify that I was sent large and mediums on the packaging, so that tells me there must have been a mix up at the manufacturer that slipped past QC, and someone needs to do a thorough check of the inventory. If I could get the correct size, I would update to 5 stars

Scritto da: Gordon Clawson

Secure fit

These fin spring straps replaced original rubber strap that broke. Spring version much easier/ quicker to slip on/off, and actually feel more secure in the water. Quality good. I have old Reeflex fins, with plastic “ mushroom knobs.” Although the sizes are nominally compatible, I had to gently grind my knobs smaller, and add a “V” notch into the circular knob, to match the new clasps, which have a protruding “>”. Worth the effiort.

Scritto da: Geraldine Lippincott

If they fit, they're great & cheaper than others

I have Tusa Hyflex & Sherwood Triton. On the Sherwoods, they're great. Just slip them in and the buckles snap... but the Tusas? I have tried several pairs of these straps and while I can get a little snap as they connect, the connection doesn't hold tight. You can give it a solid tug and they come apart. Can't figure out why they don't snap in and stay in a snug fit. Pity, cause I'll have to spend mmore to get another brand for the Tusa Hyflex

Scritto da: Brian Mulcahy

Worked great!

Used them once and they worked as advertised. The problem is there is not an extra small size and the small was a little loose for a women’s size six 3mm boot.

Scritto da: Patrick D.

Great Replacement!

I am so happy with these straps! I bought two pair, one for an AquaLung set and the other for a Tusa set. Both fins' original straps were the quick release w/buckle style. I'm not a fan of these when having to climb back onto a boat (which is most dives). Another pair of AquaLungs I own had the rubber spring strap style and I really liked the ease of those when getting the fins both on and off. After some searching, these had good reviews and a really good price. So I figured I'd try them out. Both the AquaLung and Tusa straps were super easy to remove. Although there is a slight difference in the connecting post (one has a groove, the other doesn't) I had zero issues getting the replacement straps securely on. Since then, I've only had the opportunity to use one set of fins, my AquaLungs. I used them quite a bit during a weekend of diving certification. They worked spectacularly then and still look and feel new. There has been no loss of tension in the spring and the strap overall fits and feels comfortable on my heels. I love these and am glad I made the purchase. No regrets at all!

Scritto da: Ashley Bradshaw

Seem great, sadly they didn't work for me

I took a risk ordering these, had a feeling they wouldn't work with my current fins, atomic split fins, and sadly I was right. The post is smaller on those fins and slipped right out. I did try them on my Sherwood fins and they fit the posts, however, they would be way too big to actually hold my foot in and you can't adjust them (I got a small and I'm a women's size 6). So make sure you measure posts and length you need before you buy. I gave them 4 stars because they seem like they would be awesome if they fit....Sturdy and good quality.

Scritto da: Marianne

Very good quality but the sizing of the holes is off

The straps were very good quality, and arrived quickly. I ordered these to replace the initial ones on my fins. Unfortunately the sizing was off for the holes and they were slightly too loose for my fins (cressi pro light) even if the measurments were supposed to fit. So I had to return the straps, but I wish they fitted because they seemed really good!

Scritto da: Alvin

I like the spring loaded device on them snugs up very nicely in the fin.

I have a pair of scuba fins that came with the same fin heel straps but unfortunately they were too big and wouldn’t hold my foot in I purchased a smaller set from Amazon.ca, the original ones we’re medium this smaller set work great well worth the money. I would defiantly buy them again can’t say they weren’t inexpensive but well worth the money.

Scritto da: Daniel Driver

Worked well....then loop broke

Super convenient but after a year, the heel loop handle broke on one of them. Makes getting it off impossible without using buckle and getting on more difficult as it is now a two hand job

Scritto da: Jonathan A.

Take a close look at the photos

These are awesome, but they do not fit my fins, so they are going back. My fins are ScubaPro Twin Jet Split fins. The buckles on my fins are not compatible.