Oakland Living Mississippi Tavolino in alluminio pressofuso, 18 pollici, bronzo antico

Name: Oakland Living Mississippi Tavolino in alluminio pressofuso, 18 pollici, bronzo antico
Brand: Oakland Living
SKU: 0730050000964
Price: 227.14 EUR
Availability: InStock

Brand:Oakland Living

2.9/5

€
227.14

I nostri tavolini sono perfetti per qualsiasi piccolo spazio esterno o interno o per accentuare uno spazio più ampio. È costruito in resistente alluminio pressofuso antiruggine in modo che possa resistere alla maggior parte delle condizioni atmosferiche. Il tavolino da patio viene fornito con una buona quantità di attesa in modo che non venga spazzato via dal vento. L'assemblaggio è reso semplice e veloce, quindi è perfetto per chiunque lo affronti. Viene fornito con una finitura nera verniciata a polvere con bronzo applicato a mano che gli conferisce un aspetto antico. Questo tavolino da giardino è costruito per durare molti anni.

Quantity

Aggiungi al carrello Compra subito

EAN: 0730050000964

Categories: Patio, prato e giardino, Mobili da giardino e accessori, Tabelle, Tavolini,

Finitura verniciata a polvere per aumentare la durata. Il colore bronzo antico facilita l'abbinamento con il tuo attuale ambiente esterno. Forma quadrata per adattarsi facilmente tra le sedie o in spazi più piccoli. Peso pesante in modo che non soffi via dal vento. Costruzione in fusione di alluminio resistente agli agenti atmosferici.

Assembly Required	Yes
Base Type	Leg
Brand	Oakland Living
Color	Antique Bronze
Country of Origin	USA
Customer Reviews	3.8 3.8 out of 5 stars 59 ratings 3.8 out of 5 stars
Department	Teak
Finish Type	Powder Coated
Frame Material	Metal
Furniture Finish	Bronze
Included Components	End Table
Is Discontinued By Manufacturer	No
Item model number	2106-AB
Item Weight	15 Pounds
Manufacturer	Oakland Living Co. - DROPSHIP
Model Name	Antique Bronze Cast Aluminum 18-in Square Patio Side End Table
Product Dimensions	17.5 x 17.5 x 19 inches
Product Dimensions	17.5"D x 17.5"W x 19"H
Room Type	Patio
Shape	Square
Special Feature	Portable, Waterproof, Weather Resistant, Scratch Resistant
Style	Classic
Table design	End Table
Top Material Type	Aluminum

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: MHB

Not what you would think of as rubbed bronze

Between unpacking and assembly this was together in 15 minutes. The color was not as expected but with a can of spray paint it’s perfect!

Scritto da: DoodleBug

How to Assemble this Table with no Wobbles

Here is how I assembled this table with no wobbles. The instructions are very unclear so i thought I would share with you. Assemble the 4 side pieces first using the 8 gold bolts and 8 "O" washers. For this step, a ratcheting hex nut tool is invaluable. Important- Do not fully tighten the bolts. After you assemble the sides, place the top upside down on a piece of cardboard or the bubble wrap that comes in the box. Then, screw in the 4 long topless screws into the 4 holes in the top. Make sure you put the side with the screwdriver ridge facing top so you can tighten them with a screwdriver. Add one of the washers to each of the 4 screws. Then, place the side assembly on top of the 4 screws. Important- you will have to change the position of the side assembly, switching it around until you find the right fit with the screws. Add an O ring and a washer to each screw, then add the nuts. Tighten the nuts and bolts. Hope this helps!

Scritto da: A. Matheny

Sturdy, but not very well machined and bizarre to assemble

I read that people struggled to assemble the table because of the instructions, which were worse than useless, but I figured out quickly how to assemble the table. The actually doing it was very hard because the parts were so poorly machined. Attaching the assembled legs,to the bottom of the table top took some strength because nothing squared up to fit, and then when I did get it lined up, one leg connected higher than the others (didn't nestle into the corner properly because of the poorly machined parts), so I was barely able to get the nut on the bolt. I finally got it done, but that longer leg means that the table wobbles. I fixed that with some furniture glides, so now it works and looks fine. I even stood on top of it (I way about 155 lbs.), and it is rock solid. It would get five stars with some better quality control and some actual instructions. But four stars are actually generous!

Scritto da: Jon B.

Nice looking, very good quality!

Fast delivery, very nice looking, good quality and perfect size for me!

Scritto da: Wally Wagner

Assembly Correction

It's a nice table but the simple picture directions don't specify which one of the 3 screw points at each corner should take the threaded headless piece and the nuts. During assembly it turns out that the upper screw point on the smaller side partitions needs the slightly longer headless piece. Otherwise, the screws are too short after putting the washers on them to reach the attachment point at that location. Other than that small problem, the table seems to be a nice quality patio piece just as the picture shows.

Scritto da: Leslie W. Stewart III

Instructions are.....

Very nice table and pretty easy to assemble once you find a 10mm ratchet or open-end wrench. The visual diagram must have been the last one they had from 1950. But the table is just as shown in the Amazon displayed.

Scritto da: Puppy Love

Looks great

My grandson put it together for me and said there were about 12 screws and none of them matched. They were just a bunch of odd sizes and no directions as what to do. He managed to get it together and it is sturdy and looks nice.

Scritto da: Hugodonna

I bought 2 of these...

Love the design and they look beautiful, but very difficult to put together. Had to glue metal nuts to the bottom of one leg on each table because legs were uneven. I made them work.