0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

MaxWorks 80854 Carrello in polipropilene, capacità 200 libbre, nero

Brand:MaxWorks

3.2/5

€
74.68

La dimensione della piattaforma è 19-1/2 x 14-1/2. Ideale per casa, officina, garage, ufficio e altro ancora. Maniglia per il trasporto integrata per un facile posizionamento e facilita lo spostamento del carrello dove ne hai bisogno. Include due 3 ruote piroettanti e due 3 ruote rigide per consentire un facile spostamento in diverse direzioni. La solida piattaforma stampata presenta una superficie antiscivolo scanalata, ideale per spostare oggetti stretti o sostenere le gambe dei mobili. Realizzato in materiale leggero in polipropilene che non arrugginisce né si scheggia ed è facile da pulire.

Quantity
Aggiungi al carrelloCompra subito

EAN: 0817399018543

Categories: Prodotti industriali e scientifici, Prodotti per la movimentazione dei materiali, Attrezzature per il trasporto di materiali, Carrelli,

La dimensione della piattaforma è 19-1/2 x 14-1/2. Ideale per casa, officina, garage, ufficio e altro ancora. Maniglia per il trasporto integrata per un facile posizionamento e facilita lo spostamento del carrello dove ne hai bisogno. Include due 3 ruote piroettanti e due 3 ruote rigide per consentire un facile spostamento in diverse direzioni. La solida piattaforma stampata presenta una superficie antiscivolo scanalata, ideale per spostare oggetti stretti o sostenere le gambe dei mobili. Realizzato in materiale leggero in polipropilene che non arrugginisce né si scheggia ed è facile da pulire.
Brand MaxWorks
Brand ‎MaxWorks
Color Black
Color ‎Black
Country of Origin ‎China
Customer Reviews 4.2 4.2 out of 5 stars 3,104 ratings 4.2 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 2 x 1 x 14 inches
Item Dimensions LxWxH ‎2 x 1 x 14 inches
Item model number ‎80854
Item Weight 5 Pounds
Item Weight ‎5 Pounds
Load Capacity ‎200 pound
Manufacturer ‎MaxWorks
Manufacturer Part Number ‎80854
Material Polypropylene
Material ‎Polypropylene
Model ‎80854
Number of Wheels ‎4
Product Dimensions ‎2 x 1 x 14 inches
Wheel Type ‎Polypropylene

3.2

13 Review
5 Star
64
4 Star
14
3 Star
8
2 Star
4
1 Star
10

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: TJ
Great little cart
Are use this to mount my air compressor so I can pull it around a lot easier my air compressor weighs about 100 pounds and it’s just big and bulky but with this cart I bolted it to the cart and now it is so easy to move it around
Scritto da: DV
Perfect low cost item for it's purpose
Great low cost item for what I needed it for. Using it for a interior a/c unit that weighs 70 lbs, so well under stated weight limit and makes unit very portable and easy to move around.
Scritto da: Soundman2
Small nuts and bolts...Handle with care.
Once it was assembled, it works pretty well. The small nuts and bolts can cause you some frustration when assembling the wheels. the biggest problem I found was getting a small enough socket that would fit beside the fixed wheels...other than that, the bolts didn't always go down far enough to catch the nut. Once assembled, it works fine but with fixed wheels on the rear, you have to be sure how you are aiming the back side when moving the dolly backwards. Overall, it's a good product for the money and the size of the platform.
Scritto da: Robert J. Hanlon
Nice dolly, but can be a little hard to maneuver
This is a nice sturdy dolly and was the perfect size for what I wanted. Unfortunately, only two of the wheels swivel making it a little difficult to maneuver carrying heavy objects. I would give it 5 stars except for this.
Scritto da: Pnapo1
1 wrong wheel. Aligning bolts in holes=tricky; possible Solution below. Instructions so so.
Came quickly from order date. Bolts into holes are a bit tricky to line up, but can be done. Nuts attach underneath. Putting cart top side up, pushing bolt into hole. Try to line up head with location in hole. Hold bolt in with finger; flip over to place wheel, attach nut and loosely tighten nut. {Fixed wheels go on end opposite handle hole]. After all wheels are in place, THEN tighten nuts. Socket set best to use. Only issue I had was they supplied 3 spinning wheels and only 1 fixed wheel. Should have been 2. It works ok, but would be better if the 2nd back wheel was fixed as designed. Will contact seller for replacement wheel.
Scritto da: John E. Weber
The church ladies love it!
Bought this to hold large metal pots under a basement sink cabinet at church, where the pots are nested together. It allows the cooks to pull the pots out easily and keeps them off the floor. Saves space, keeps the church ladies happy and makes me look like a hero- a home run in my book.
Scritto da: RobertFrye
Don't follow the instructions!
First, I followed the instructions. I put the screws in the holes and then put the covers on the holes as directed. BUT, the covers did not completely fill the holes so the screws would not stay in their appointed position; they dropped back some, and there was not enough screw to for a nut to catch the threads. I had to remove the hole caps; not an easy chore. After removing all the hole caps, I proceeded to put nuts on the screws. Two of the nuts had no threads. Yes, literally NO threads. So I've got two open screw holes. When tightening the screws that hold the casters on the body, I found it very awkward to tighten the nuts on the non-swivel casters. I used a socket wrench, and I could not get vertical contact with the nuts. I'm not returning it because it will now suit my purpose, and I certainly don't want to disassemble it. But I had intended to purchase two more if the first one was satisfactory. I'll likely look for another product. And I'll look for one with 4 swivel casters. My intended use is for potted plants and it is convenient to have all four wheels swivel. My home-made dollies (which have rotted, causing me to look for non-wood equivalents) had 4 swivel wheels and worked very well for me.
Scritto da: PJ
Directions need clarity
The directions are not organized properly and the screws need to be longer. It would help if a wrench was included because it was difficult tightening the nuts by the fixed wheels. Also, the rubber caps do not hold the screws well enough so that you can put the wheels on. I worked by putting the item on it's side, rubber caps off, pressed screws down in the holes with my finger while I hand tightened the nuts on the the wheels. This project took longer than it should have. The product seems sturdy. I have not actually used it yet. Again, it would be helpful to have had a wrench included. I used a 3/8 wrench but I had difficulty with the nuts on the back fixed wheels.
Scritto da: Welsh Dragon
Fiddly to assembles, but works great
The dolly is a bit fiddly to assemble. The nuts needs to be aligned in the holes before you tighten them and you need to make sure that the fixed/not fixed wheels are paired front and back. Once you've done that, they're a great asset moving bulky heavy items.
Scritto da: Kindle Customer
Bought it used
Saved $5. Was just like new - except missing instructions and 2 bolts. So I didn’t know about turning wheels until I installed one wrong end - my bad. Also there are 16 bolts - 16 screws would have cut the assembly time in half. Bad user experiences! Rough wheel(s) scratched my hardwood floor. There was maybe 20 lb of Christmas boxes on it. Junk.
Scritto da: sandybeachqualicum
great quality and value for the price
I was pleasantly surprised to see these came fully assembled. They are light weight with decent quality wheels / casters. I use them in my garage and crawl space and if i need to expand my fleet (lol) i would certainly re-purchase these.
Scritto da: Brian
Works great
to move a work bench
Scritto da: SEAN BEST
Easy roll Drawer
Fantastic Tool for rolling out a stack of totes in you condo storage so you can get to your shelves in behind! Saves you from lifting individual boxes and then restacking. Simple assembly.

Prodotti correlati

hot
Carlisle FoodService Products IT41003 Cateraide Carrello caricatore frontale IT con rotelle, onice
0.1/5

€ 532.61

Carlisle FoodService Products IT41003 Cateraide Carrello caricatore frontale IT con rotelle, onice
0.1/5

€ 532.61

hot
dbest products Carrello per scalatore per scale Carrello per la spesa pieghevole Carrello per la spesa a 3 ruote per carichi pesanti Realizzato per condomini Appartamenti, altezza della maniglia di 39 pollici, 17,25 "x 15,25" x 39,5 ", nero standard nero
3.4/5

€ 218.09

dbest products Carrello per scalatore per scale Carrello per la spesa pieghevole Carrello per la spesa a 3 ruote per carichi pesanti Realizzato per condomini Appartamenti, altezza della maniglia di 39 pollici, 17,25 "x 15,25" x 39,5 ", nero standard nero
3.4/5

€ 218.09

hot
Vestil VHMS-2 Rullo per macchina con parte superiore girevole, corpo in ferro con cuscinetti in acciaio, capacità 2000 libbre, 3-1/4" x 3-1/2" x 8"
4.1/5

€ 230.30

Vestil VHMS-2 Rullo per macchina con parte superiore girevole, corpo in ferro con cuscinetti in acciaio, capacità 2000 libbre, 3-1/4" x 3-1/2" x 8"
4.1/5

€ 230.30

hot
Carlisle FoodService Prodotti Cateraide Carrello in alluminio per portabacinelle (PC300N) Alluminio
3.6/5

€ 494.40

Carlisle FoodService Prodotti Cateraide Carrello in alluminio per portabacinelle (PC300N) Alluminio
3.6/5

€ 494.40

hot
MaxWorks 50562 Base a rotelle mobile multifunzione regolabile Capacità di carico di 500 libbre per elettrodomestici e mobili, grigio
3.3/5

€ 77.11

MaxWorks 50562 Base a rotelle mobile multifunzione regolabile Capacità di carico di 500 libbre per elettrodomestici e mobili, grigio
3.3/5

€ 77.11

hot
Carrello ruota Sunex da 1500 libbre
3.4/5

€ 468.22

Carrello ruota Sunex da 1500 libbre
3.4/5

€ 468.22

hot
Amazon Basics Carrello pieghevole per scalatore per scale trasformabile in carrello, altezza maniglia 44 pollici, blu 44 pollici blu
3.5/5

€ 182.82

Amazon Basics Carrello pieghevole per scalatore per scale trasformabile in carrello, altezza maniglia 44 pollici, blu 44 pollici blu
3.5/5

€ 182.82

hot
Vestil ATD-1622-6 Carrello regolabile in acciaio con rotelle da 6", capacità 3000 libbre, lunghezza massima utilizzabile 34" x larghezza 24"
3.9/5

€ 701.46

Vestil ATD-1622-6 Carrello regolabile in acciaio con rotelle da 6", capacità 3000 libbre, lunghezza massima utilizzabile 34" x larghezza 24"
3.9/5

€ 701.46

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu