Little Giant AFV-GH Valvola di riempimento automatico/valvola di pompaggio, per laghetti, fontane, giochi d'acqua, acquari o serbatoi, bianco/nero, 566286

Brand:Little Giant

3.2/5

79.33

Il kit valvola di riempimento automatico Little Giant AFV-GH è progettato per riempire automaticamente skimmer, stagni, acquari, fontane o serbatoi. Questa unità include raccordi per un tubo da giardino standard da 3/4 di pollice, tubo da giardino da 1/2 pollice, tubo da 1/2 pollice o tubo in PVC da 1/2 pollice. L'acqua viene aggiunta a una velocità di circa 1,5 litri al minuto per aiutare a mantenere un ecosistema sano, quindi non è necessaria acqua declorata. La valvola di riempimento automatico manterrà il livello dell'acqua a circa 1-1/4 pollici al di sotto della linea centrale orizzontale del foro di montaggio. La regolazione del livello dell'acqua può essere effettuata regolando il dado ad alette vicino al galleggiante.

SPECIFICHE: l'unità è lunga 7,6 pollici x 2,3 pollici di larghezza x 2,3 pollici di altezza (esclusi gli adattatori); la valvola ha una filettatura MNPT da 1/2 pollice; morsetto in acciaio e adattatori inclusi. PORTATA LENTA: aiuta a mantenere un ecosistema sano in modo che l'acqua declorata non sia necessaria negli stagni o negli acquari; si riempie a una velocità di circa 1,5 litri al minuto. REGOLABILE: manterrà il livello dell'acqua a circa 1,25 pollici al di sotto della linea centrale orizzontale sul foro di montaggio a riempimento automatico; regolare il dado ad alette vicino al galleggiante per regolare. ADATTATORI INCLUSI: la valvola MNPT da 1/2 pollice viene fornita con un adattatore per tubo da 1/2 pollice, un adattatore spinato da 1/2 pollice per tubi da 1/2 pollice e un adattatore per tubo da giardino da 3/4 pollici. APPLICAZIONI: funziona con la maggior parte degli skimmer e altre attrezzature o serbatoi per laghetti/fontane per consentire all'acqua di riempire automaticamente la volta, il bacino o il serbatoio.
Brand Little Giant
Country of Origin USA
Customer Reviews 4.1 4.1 out of 5 stars 127 ratings 4.1 out of 5 stars
Exterior Finish Steel
Inlet Connection Size 0.5 Inches
Inlet Connection Type National Pipe Tapered
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 5.1 x 2.3 x 2.3 inches
Item model number 566286
Item Weight 0.01 ounces
Manufacturer Little Giant
Material Plastic
Outlet Connection Type MNPT
Product Dimensions 5.1 x 2.3 x 2.3 inches
Valve Type Float Valve

3.2

11 Review
5 Star
55
4 Star
22
3 Star
10
2 Star
8
1 Star
5

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Clyde Logan
Easy to install; and also like having connector options
The best part about this item is that is comes with several connector options in the box, so no additional searching for these.
Scritto da: Kindle Customer
This is the float valve to use for garden hose connection
This inlet float valve has a bulkhead fitting AND it has a hose connector - for garden hoses. Other floats that I've seen (and 'returned') that said they had garden hose connections did not. Because the connector is plastic, I would use plumbers tape before threading on the hose connection. This is going to be somewhat tricky as I can't spin the tank and spinning the hose is rather awkward. But I'll figure it out. I would LIKE to have one of those connectors that are on the end of a garden hose. Oh well. Not terribly likely. When I get the self-watering system set up and have it installed, I'll put up a picture. 4 stars because the garden hose connector should be similar to that on the a hose where it connects to the hose bib rather than stationary. UPDATE: 2012-09-30: I found one of those connectors that has the female hose connector that 'spins', like the faucet side connector (I did not want to cut the hose and put a 'faucet side' connector on the output side as I might want to use the hose elsewhere someday). Anyways, it works just fine. I have a minor drip (from the hose!!!), but it is a cheap piece of garbage that I got a few years ago. I'm going to replace it (after all) with a shorter piece of Flexogen hose that I put two after market female connectors on - one on each side. I just recovered one of my 55 gallon drums and am going to use it as my water tank, rather than leave the water running. I'm also curious to see how my 'gutter self-watering' system is going to work and how much water the 9 tomato plants sitting on it use. Perhaps I shall put up pictures and give a link. It is the BEST self watering system I've seen, as it is self-minding. I love 'science fair' type projects. Where you just fiddle around to get new ideas to work, don't you? Anyway, this Little Giant valve is a great product. It is working like a champ! I'd up it to 5 stars as there is nothing else as good on the market that I have found. 2012-10-21: I put up a picture of the 'gutter watering system' with the float installed in the end of the gutter.
Scritto da: Kitten
Really works!
Saves me so much worry over loosing water from my pond from evaporation. Also makes a great fish toy. My Koi go up under it and push up and make it spray water all over for the other fish to swim through. Connects to a regular water hose. I use an Amazon inline water filter to take out chlorine. This is a fantastic product.
Scritto da: Jeff W. Johnson
Waterfall Filler-Upper
Great little fillers. I had the brass version for the last 15 years, however, these split last winter when the pond level got up to the level of the filler and then froze. These are plastic, but appear well made. The orifice is small and that is my only concern. They just don't allow much water in at a time, however, it does keep up with the loss in both my waterfall ponds. The kit also comes with four connection options, which is really nice as an aside.
Scritto da: Stanley S.
This looks more promising because it is easy to clean of pond debris which clogs valves
Working very well - have had it about 6 weeks. Time will tell if it lasts; previous other kinds of fill valves have failed after a season or two in my fish pond. This looks more promising because it is easy to clean of pond debris which clogs valves. You need to consider carefully how you will be able to install it. I needed to drill a half-inch hole in the side of a heavy plastic tank in a difficult to access location, which necessitated hiring a handyman. Little Giant 566286 Auto Fill Valve, 1/2-Inch NPT
Scritto da: Zay
Better left for very small and light jobs
This seems to work fine, but installation can be a pain due to the fact the product is pretty fragile. Anything more than finger tightening and you risk breaking it. Be very careful putting any sort of tool to this thing. The nuts are made of soft plastic, so... thread lightly :-) I installed this in a small water feature outside. I wanted a small float and this sort of fits the bill. But I probably would not buy it again in less I was putting it in an aquarium or something pretty small. It comes with several adapters, nice idea, but for $30 it is a little iffy...
Scritto da: Jimmie Knox
Little Giant Fill Valve
We have a water pond feature that requires constant attention to refill because of evaporation. The Little Giant Auto Fill Valve is perfect for the task of keeping the water level as it should be. At first I was dubious about how it would perform but after installation, and a little trouble with the included washer, it has performed perfectly for my needs. The only reason I chose 4 stars to rate this instead of 5 is because I'm not really in love with it, but I do consider it a worth while investment for the job at hand.
Scritto da: Allerion
Does the job
Works. Kind of low-budget like a cheap toilet auto-fill, but it does the job...and it was the cheapest on Amazon so why should I complain. Perhaps I should give it 5 stars, but this was a pretty simple product designed to keep your fish from dying in the event that your pond goes nuts while you're away. The only possible fault I can give this product is that it does not thread tightly to my skimmer, but it is a DIY skimmer, so maybe it works better with pre-fab products.
Scritto da: Kent Molberg
Excellent product
Worth the purchase. Float level is adjustable. Works excellent in my pond skimmer
Scritto da: Anthony J. Shaw
It really works well.
Keeps the water level in the pond to a consistent level. Great little addition to my pond.
Scritto da: Roger Desaulniers
Installation facile
Niveau de bassin. Très correct

Prodotti correlati

hot
Nuovo manometro carburatore Stens 705-020
3.4/5

€ 159.88

Nuovo manometro carburatore Stens 705-020
3.4/5

€ 159.88

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart