Kingston Brass CC10T1 Riempimento per vasca da gamba vintage con doccetta, 4-3/4 pollici, cromo lucido

Name: Kingston Brass CC10T1 Riempimento per vasca da gamba vintage con doccetta, 4-3/4 pollici, cromo lucido
Brand: Kingston Brass
SKU: 6928934288117
Price: 552.14 EUR
Availability: InStock

Brand:Kingston Brass

3.4/5

€
552.14

Costruzione in ottone massiccio per una maggiore durata e affidabilità, Finitura di colore premium che resiste all'appannamento e alla corrosione, Cartuccia a dischi ceramici da 1/4 di giro, Rompivuoto per prevenire il riflusso, 3 3/8 di diffusione da centro a centro, Rompivuoto nel palmare, Ingresso IPS da 3/4, Doccetta decorativa inclusa

Quantity

Aggiungi al carrello Compra subito

EAN: 6928934288117

Categories: Strumenti e miglioramento della casa, Attrezzature per cucina e bagno, Attrezzature per il bagno, Rubinetti vasca e soffioni doccia, Sistemi vasca e doccia,

Conforme al titolo 20 della California Energy Commission. Portata massima di 2,0 GPM/7,6 LPM a 80 PSI sulla doccetta. 3-3/8 Diffusione; Manici in porcellana etichettati a caldo e a freddo. Cartuccia a dischi ceramici da 1/4 di giro. Costruzione in ottone.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Kingston Brass
Brand	‎Kingston Brass
Color	Polished Chrome
Color	‎Polished Chrome
Country of Origin	‎Taiwan
Customer Reviews	4.4 4.4 out of 5 stars 136 ratings 4.4 out of 5 stars
Finish	‎Polished
Finish Type	Polished
Finish Type	‎Polished
Flow Rate	‎2 Gallons Per Minute
Handle Material	‎Brass,Ceramic,Porcelain
Handle/Lever Placement	‎Wall-mount
Is Discontinued By Manufacturer	‎No
Item model number	‎CC10T1
Item Package Quantity	‎1
Item Weight	‎8.16 Pounds
Manufacturer	‎Kingston Brass
Material	Brass
Material	‎Brass
Mounting Type	‎Spread
Number of Handles	3
Number of Handles	‎3
Number Of Holes	‎2
Part Number	‎CC10T1
Product Dimensions	‎10 x 9.5 x 4.25 inches
Size	‎4-3/4-Inch
Style	‎Contemporary
Water Consumption	‎2 Gallons per Minute

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Cheryl J. Lorditch

Order this part listed below for an easy install takes a 3/4 NPS female not 3/4 IPs as listed

Order this... G ProLock PSEI622036E-L ProLock Push-to-Connect Female Connector (2 Pack), 1/2" CTS x 3/4" NPS, Black, 2 Piece Brand: JG ProLock you wont get a 3/4 ips sharkbite to seal on the threads.. I tried several times. You need a a fitting with a rubber gasket that hits the flat surface of the threads end.

Scritto da: John M. Schubert

Kingston Tub Faucet is a Winner

Make certain that the spacing between the faucet holes is correct before you order. There are different sizes. That said this really works great. I had a plumber help with the installation of the shut-offs. He said that Kingston Brass was the best, I'd have to agree. The plumber had to leave so I did the rest of the install myself. The drain pipes have to be cut to fit. I used a tubing cutter and filed the edges after the cut. Where the drain fits under the tub I used 3M scotch-brite sanding pads to remove any scale or rust. I got a "drain insert tightening tool" with 4 prongs from Ace hardware just to install the drain. This is a speciality tool that you will need. The drain has a rubber washer that fits under the tube to provide a flexable seal. I used Locktite #2 Form-a-Gasket to adhere this to the tub. I installed the drain from the bottom and the strainer from the top using the 4 prong drain tool form Ace. I used flexible stainless supply lines (hot and cold) from Home Depot and installed the Kingston faucet with no trouble. Worked the first time with no leaks. It's been 3 months now and no problems yet.

Scritto da: Mollita

We were able to tweak the compression fitting into a handheld diverter valve enough to get the riser to sit plumb but it isn't the best practice to do so

This valve is solid and substantial but the main defect in the specific one we received is that the elbow that goes to the shower or handheld cradle is less than 90 degrees, if using the handheld cradle this would not be noticeable but we were installing an overhead shower riser pipe and had to force it back quite a bit to get a vertical/plumb installation. Another thing I noticed is that the brass is more yellow/gold color than Kingston Brass shower valves I have purchased in previous years, I don't know if the composition of the alloy has changed or it is an artifact of the tarnish protection, but I prefer the older color which is darker, more copper in appearance. We were able to tweak the compression fitting into a handheld diverter valve enough to get the riser to sit plumb but it isn't the best practice to do so. Another thing, the instructions are limited, this valve uses lever handles that secure with an allen head setscrew, you do not use the screws that come attached to the knurled valve stems.You do not and cannot remove the cap that is installed on the handle. The screws on the tips of the valve stems would be used for cross handles in another type of setup. We removed the red and blue indicator O-rings before installation.

Scritto da: Rattpac

Fits my claw foot tub to the T

Update on 1/8/2020. Got the new valve stem in yesterday, installed and faucet works fine. We will see how well it holds up. Update 12/31. Got it hooked up today to the water lines and hot side will not close all the way off. Used the Amazon app to file warranty clam, said est. delivery date is on 1/7 so we will see how it goes. Also went ahead and contacted Kingston Brass to see if I can get it rushed but no luck. I know quality control sometimes can fail, but if I was not a DYI person, I would have to pay for a plumber to come and install. Bought as Christmas gift for my wife to replace a faucet I got a few years back. This fit the claw foot tub faucet holes perfectly without using adapters like the older faucet. It seems to be built better, heavier and better styling. Installed after I re coated the tub and she is very happy with the outcome.

Scritto da: Anonymous2001

Some issues

My handle on the hot water didnt fit properly. I has an orange o-ring that was proud and that makes the handle loose. Also the one way valve on the sprayer stopped working after a week so I had to remove it. Overall its well made and I'm happy with it

Scritto da: Marc Ness

Solid construction, good finish.

Very solid construction, straightforward install. I installed it about 2 weeks ago, works great. One unexpected bonus, the water runs almost silently through the assembly, no aeration or chaotic flow means it fill the tub fast and almost silently. To me this is a bonus, since I'm not a fan of lots of noise, and burbling water makes a white noise that means I can't hear anything happening outside of the bathroom. For some, this might be a negative, it does mean that you can't start to fill the tub and walk out of the room only to be reminded that your tub might be overflowing five minutes later when you hear the water splashing into the tub water. Shower head works great. Polished finish is high quality. Very nice product.

Scritto da: Bonnie Cosby

No technical support

I'm trying to replace my ten year old filler with a new one. Should be an easy swap out. I'm having a small problem and have tried all afternoon (Thursday) to ask a simple question. I also dropped it and the lever for the hand shower broke. I don't see anything like it in their parts page. Not a very happy person at all right now. My tub is unusable and no Idea when it will be. Thanks, Kingston Brass. I really expected better.

Scritto da: Teresa Frith

fits old fashioned tubs great

It was very hard to find a hand held faucet that fit my old claw foot tub and this one even though a bit expensive fit great.

Scritto da: Douglas M. Irvine

Classy Addition to Claw-foot Tub

This is well worth the price. Very fancy. One handle arrived cracked which seemed a little weird but they were quick to replace.

Scritto da: Amazon Customer

excellent produit

Belle qualité et prix tres competitiufs

Scritto da: Mama Ris

Looks awesome!

Looks great. Excellent quality. Would recommend Kingston Brass for anyone wanting a great tap for their vintage tub.

Scritto da: Ghemri

Robinet

Un produit de qualité

Scritto da: Amazon Customer

This product looks nice and arrived in a timely fashion

This product looks nice and arrived in a timely fashion. However, there was a set screw missing which holds the cold water tap knob in place and this was the last part to be installed. We either have to take it all apart and return in for a replacement or we have to find a local retailer with a screw that fits.The plumbers doing the work said it was a unique screw. The hand shower knob screw won't tighten enough to hold the knob in place, so the knob just sits there and will come off in your hand with ease. This was disappointing for the price of the taps.