HHIP 1011-0023 Estrattore per viti n. 3 n. 3 dimensioni

Brand:HHIP

2.9/5

22.21

Estrattore per viti n. 3 (1011-0023) Rimozione rapida e semplice di viti, tubi, bulloni e prigionieri rotti senza danneggiare le filettature nel foro. Prodotto negli Stati Uniti per rimuovere viti o bulloni di dimensioni 7/32-9/32. da utilizzare con un trapano 5/32.

Da utilizzare con un trapano 5/32. Per rimuovere viti o bulloni misura 7/32-9/32. Fabbricato negli Usa!. Rimozione rapida e semplice di viti, tubi, bulloni e prigionieri rotti senza danneggiare le filettature nel foro.
Country of Origin China
Item model number 1011-0023
Manufacturer HHIP
Product Dimensions 3 x 1 x 6 inches; 0.81 Ounces

2.9

6 Review
5 Star
60
4 Star
4
3 Star
10
2 Star
11
1 Star
14

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Frank
Worked great!
Worked like a charm on three small stripped screws.
Scritto da: Kindle Customer
It is functional
The most brutal way to remove a stripped screw but it works.
Scritto da: DanB
Screw Extractor bits not effective or user not experienced
I purchased these screw extractors to remove stripped deck screws from my deck boards. I attempted to drill a hole through the center of the screws to enable the extractors to bite into the metal of the screws and help extract them. I used different size drill bits and different size extractors to try to accomplish the extraction. However, I was not able to get any of the extractors (from the smallest to the largest) to bite into the screws so I could extract them. I removed some of the damaged screws by drilling a hole far enough into the screw so that a phillips head bit was able to extract them. For the remaining damaged screws I drilled out the entire head of the screws and removed it from the other side of the board. This is the first time I attempted to use these screw extractors and maybe I don't know the technique. I would appreciate any advice from the manufacturer.
Scritto da: David R Lee
Well-made. Many small diameter extractors break easily.
Arrived quickly and excellent quality.
Scritto da: drmaturin
You need a tiny handle
need a very small tap handle to turn.
Scritto da: Tim B
Worked to remove broken exhaust bolt in snowblower engine
I was doing some maintenence on my snowblower and wanted to replace the old muffler. The muffler is held on with two Philips head bolts and I could not get one of them off, I ended up stripping the slots. I tried a pair of vice grips and completely ruined the head. I found this screw extractrbamd decided to try it. While waiting for it to arrive I kept spraying the bolt with pb blaster hoping it would penetrate the threads and help it loosen. I drilled a hole down into the bolt then used this extractor and the bolt finally came out.

Prodotti correlati

hot
Pasco 4831
4.1/5

€ 56.41

Pasco 4831
4.1/5

€ 56.41

hot
ESTRATTORE per viti Stahlwille set 6pz
3.3/5

€ 190.21

ESTRATTORE per viti Stahlwille set 6pz
3.3/5

€ 190.21

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart