Enbrighten, White & Light Almond, GE Z-Wave Plus Smart Motion Light Dimmer, Funziona con Alexa, Google Assistant, SmartThings, Wink, Zwave Hub richiesto, Ripetitore/Range Extender, Compatibile a 3 vie, 26933

Brand:Enbrighten

3.2/5

116.31

Metti in moto la domotica con Enbrighten Z-Wave In-Wall Smart Motion Dimmer. Se abbinato a un hub compatibile, il dimmer intelligente cablato aziona plafoniere, apparecchi a parete e altro tramite comandi individuali e impostazioni programmate. Controlla e programma in modalità wireless gli apparecchi interni o esterni per una gestione senza sforzo della tua casa. Le tue possibilità di automazione sono apparentemente infinite quando sei connesso a hub di Wink, SmartThings, Home Seer, Vera, Nexia e altri.

FACILE INSTALLAZIONE - Richiede l'installazione interna a parete con connessioni cablate. NECESSARIO FILO NEUTRO. Include bottoni di copertura a mandorla bianchi e chiari (piastra a muro non inclusa). Capacità dimmerabile a gamma completa per l'uso con LED e CFL dimmerabili, nonché lampadine a incandescenza e alogene. Potenza supportata: 600 W a incandescenza; LED/lampada fluorescente da 150 W. Tensione supportata: 120 V CA. Intervallo di temperatura operativa 32-104 gradi Fahrenheit. COPERTURA COMPLETA PER LA CASA - Z-Wave Plus funziona con tutte le precedenti generazioni di Z-Wave per consentire la continua espansione della tua rete domotica. Il dimmer è in grado di controllare apparecchi interni o esterni per l'automazione di tutta la casa e ripete il segnale Z-Wave dal tuo hub o altri dispositivi per estendere la portata fino a 150 piedi. La portata del segnale estesa aumenta la copertura domotica per migliorare il controllo. 3-WAY READY – Il dispositivo intelligente funziona perfettamente da solo o si integra perfettamente in configurazioni multi-switch con switch aggiuntivi richiesti – modelli 12723 o 46199. È possibile collegare fino a quattro switch aggiuntivi allo stesso dispositivo. CONTROLLO DEL MOVIMENTO SELEZIONATO - Il dimmer regola i livelli di luminosità delle luci LED, CFL, a incandescenza e alogene regolabili dallo 0 al 100 percento per ridurre i costi energetici e migliorare la durata della lampadina. Personalizza il dimmer con tre opzioni di rilevamento del movimento: presenza, assenza e manuale. La modalità di occupazione accende/spegne automaticamente le luci, mentre le luci vengono accese manualmente e spente automaticamente nell'impostazione di posto vacante. Per disattivare il sensore di movimento, selezionare il funzionamento manuale. Con cinque opzioni di durata del timeout che vanno da cinque secondi a 30 minuti e una copertura di rilevamento fino a 180 gradi, il dimmer si adatta a qualsiasi stanza con quantità variabili di attività. Inoltre, goditi scene personalizzate, programmazione versatile e comodi avvisi con funzionamento remoto e controllo vocale quando sei connesso a un hub compatibile. CONTROLLO VOCALE – COMPATIBILE CON ALEXA E GOOGLE ASSISTANT (richiede un hub certificato Z-Wave). Funziona con i seguenti hub certificati Z-Wave: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera e altri.
Actuator Type Push Button
Actuator Type ‎Push Button
Batteries Included? ‎No
Batteries Required? ‎No
Brand Enbrighten
Brand ‎Enbrighten
Circuit Type 3-way
Circuit Type ‎3-way
Color ‎White & Light Almond
Connectivity Protocol ‎Wi-Fi, Z-Wave
Control Method ‎Voice
Controller Type ‎Nexia, Vera, Google Assistant, Amazon Alexa, SmartThings
Country of Origin ‎China
Customer Reviews 4.1 4.1 out of 5 stars 178 ratings 4.1 out of 5 stars
Included Components ‎1 In-Wall Sensor
International Protection Rating IP00
International Protection Rating ‎IP00
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 1.5 x 1.5 x 3 inches
Item Dimensions LxWxH ‎1.5 x 1.5 x 3 inches
Item model number ‎26933
Item Package Quantity ‎1
Item Weight ‎7 ounces
Manufacturer ‎Jasco Products Company, LLC
Mechanical Life Expectancy ‎2 years
Mounting Type Wall Mount
Mounting Type ‎Wall Mount
Number of Items ‎1
Operating Voltage 120 Volts
Operating Voltage ‎120 Volts
Operation Mode ON-OFF
Operation Mode ‎ON-OFF
Part Number ‎26933
Product Dimensions ‎1.5 x 1.5 x 3 inches
Size ‎Dimmer
Style ‎Motion Dimmer
Switch Style Motion Dimmer
Switch Style ‎Motion Dimmer
Terminal Spdt
Terminal ‎Spdt
Unit Count ‎1.0 Count
Upper Temperature Rating ‎40 Degrees Celsius
Warranty Description ‎2-Year Limited Warranty
Wattage ‎600 watts

3.2

4 Review
5 Star
59
4 Star
20
3 Star
6
2 Star
4
1 Star
10

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Corey
Works well, a bit pricey
The product itself works great. I am using one for my guest bathroom and laundry room. I think the price is a bit high for what you get but there are not a lot of comparable zwave in wall switch/motion sensors. Having the motion sensor built into the switch eliminates the need for a battery or usb cable. Of course, your switch has to be located such that the field of view will detect the traffic like you want. I did have a slight issue getting the switch plate to fit over the switch. The buttons wouldn’t move freely. I just used some sandpaper to make the opening slightly larger and I was in good shape.
Scritto da: Scott Reston
Great switch for half-bath, good Home Assistant support
Installed this in my half-bath and have it connected to Home Assistant via Zwave-JS. It's working great so far. You can configure the light to stay on up to 30 minutes after motion. The motion sensor in Home Assistant reports "OFF" in about 25 seconds. I put a contact sensor on the bathroom door and set up a template sensor that's "on" when there's motion from the switch sensor or the door is closed. I have Home Assistant turn off the light when that sensor goes "off". So in practice, if you close the door, the light will stay on for you whether you move around enough to keep the motion sensor happy. But if the door is open, the light'll turn off after about 25 seconds with no motion. This works great for us as you can see the reflection of the bath light on our living room TV.
Scritto da: RAF
Got to know what you are doing :)
I have about a dozen of these in my new home and they are working great. But unlike more most reviewers I use Hubitat and not Wink or Smartthings. Hubitat allows controlling the advance features of this device and also does not use an internet connection to a remote Wink or Smartthings server. I have my switches setup in "Automatic" mode and when the light turns on Hubitat switches the mode to manual. This allows me to control the switch in a more sophisticated way. For example, in our master bathroom with the switch in automatic mode you walk into the room and the lights turn on immediately. But leaving the switch in automatic mode is a problem when we go into our walk in shower and are out of view, after X number of minutes the lights would turn off. The solution was to put a motion sensor in the shower (it has a high ceiling and stays dry). By creating a Hubitat rule and switching the dimmer to manual mode once the lights are turned on and using motion seen by either motion sensor, the shower or GE dimmer, Hubitat keeps the lights on in the bathroom. The shower motion sensor has another rule to turn on the shower lights and fan (another GE Z-Wave Switch).. The combination of Automatic and Manual modes and the Hubitat controller has been a very useful technique in automating my home lighting. Hubitat also controls the dimmer settings used throughout the day and night and I've seen no issues. It's nice to walk into the bathroom late at night or early morning and now be blinded with very bright lights!
Scritto da: Pierce Thomas
Works well, would recomend if a motion switch is needed.
I recently took the leap into starting my smart home. I purchased a few switches and thought I would leave a review that other might find helpful as a first-time setup. Below are a few details about my current configuration with the GE 26933 Motion Switch. Setup: I am using 4 of the Cree 9.5W Dimmable LEDs Cree 65W Equivalent Soft White (2700K) 9.5W BR30 9W Dimmable LED Flood Light Bulb (4-Pack) For a total load of about 47.5w on the switch. One note about the bulbs (not necessarily about the switch) is the fact that there is a slight buzzing noise, but only while in a dimmed state. PRO: • Smooth Dimming • Silent operation (no noise turning on or off) • 4x configurable associations • Motion sensing • Never worry about turn off (if you have the motion sensing activated, you never have to worry about shutting the switch off.) CONS: • Very large body (This switch takes up a lot of space in the junction box, make sure you have enough room) • No settable minimum brightness (some of the Lutron switches have a configurable minimum for LEDs) • Minimum brightness is not the same as other GE Z-Wave switches such as the GE 14294. Minimum on the GE 26933 is roughly what 30% would be on the GE 14294. The GE 14294 will go completely dark if dimmed all the way and will appear “off”. • If the switch is turned on by motion, it never appears to turn off in the Hub. It is as if the switch “dims” to 0% (not a big deal, but it does show the Hub that it is on) • I had difficulties trying to change the motion settings using the buttons as the manual describes. • No supplied cover. The Lutron screw less cover “White” matches the switch perfectly.Lutron Claro Single-gang Wallplate - Parent All in all I do really enjoy this switch, there are a few quarks to get around, but the motion sensing works very well. I have this switch installed next to stairs and it lets me know when someone is coming up. It has an automatic time out that is “configurable”, but I have yet to get it to change from the default of 5min. The color of this switch and other

Prodotti correlati

hot
Dimmer remoto, DLDIMMER
3.3/5

€ 120.95

Dimmer remoto, DLDIMMER
3.3/5

€ 120.95

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart