Eaton 7737W 1-Watt 120-Volt Full LED Corridoio Nightlight Heavy Duty Grado, Bianco

Name: Eaton 7737W 1-Watt 120-Volt Full LED Corridoio Nightlight Heavy Duty Grado, Bianco
Brand: Eaton
SKU: 0032664727764
Price: 44.74 EUR
Availability: InStock

Brand:Eaton

3.7/5

€
44.74

Può essere cablato in serie e controllato da un interruttore per applicazioni come corridoi, scale o camere da letto. Include funzionalità di oscuramento completo e 3 livelli preimpostati per abbinare facilmente i livelli di luce sul dispositivo. Per una maggiore protezione, la cinghia di montaggio è zincata per proteggere dalla corrosione. La parte superiore e il corpo posteriore in materiale termoplastico sono praticamente infrangibili per garantire anni di utilizzo. Gestito da un sensore fotografico che si accende automaticamente al buio e si spegne quando c'è luce.

Quantity

Aggiungi al carrello Compra subito

EAN: 0032664727764

Categories: Strumenti e miglioramento della casa, Illuminazione e ventilatori a soffitto, Lampade da parete, Luci sotto il mobile,

Brand	Eaton
Color	White
Light Source Type	LED
Material	Thermoplastic
Power Source	Corded Electric

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: bhobbs

Hope this helps others with hopes of a similar setup...

At first this did not work for me, but then I figured out a safe way to make it work. I bought this with a lesser understanding of 110V wiring than I have now. This LED night light requires a neutral, and you cannot just swap out an unused hot grounded light switch for this... I bought this because I have an unused unnecessary switch that runs up to a ceiling fixture for providing off an on power to a ceiling fan motor, a separate switch next to it to controls the light. The switch location is an ideal spot for a nightlight as it right in the middle of a hallway. Not only that, but I wanted this because the ceiling fan I bought has an inline controller that switches the light and fan off by remote, or via an app; so only one of the switches and wiring to that fixture was necessary. Long story short I went up to the ceiling fixture removed the wiring cover, found the unused wire that runs to switch, connected that up to the white neutral wire that ceiling fixture was using for a complete circuit, and that ran a neutral down to where the LED switch was. Aside from being a black neutral, which I remedied with white electrical tape, the circuit is proper, and the LED night light works perfectly. The photo shows 2 switches, the LED nightlight and my ceiling fan remote, the one on the far left is my hall light, the one in the middle the ceiling fan/light (controlled by the remote to the right of the three receptacle faceplate), and then of course the LED night light wired up with a proper circuit (so long as your not anal about the fact that the wire running as a neutral is black under the tape; but that doesn't matter).

Scritto da: Harry Reckinrod

Nice Installed Nightlight Solution

I used these to replace two dead switches created during remodeling. This time they were a solution to a problem, but in our next house I'll be actively looking for opportunities to install them. After installing an inline duct fan that serviced both vents in our master bathroom, I had a dead switch next to the toilet. This was the perfect solution for that area, as it allowed night time use without having to turn on the lights in the bathroom. The second light was installed next to a closet where light control had been moved from two switches to one. This made a great night light for the room. The highest brightness setting is offensively bright. Medium and low are both suitable for use as night lights. The nightlight takes about 10 seconds to activate after the room goes dark. These were installed for about six months before we sold our house and we had no issues with them. For these people having them burn up, I'd be interested in seeing what their wiring looked like. For someone to have 4 out of 5 units burn up when no one else it having problems suggests either a batch QA issue or end user error. Maybe time to call in the electrician.

Scritto da: Darrel

Love this night light

The light has a built in dimmer so that the light output can be adjusted as you desire. It can be set to come on automatically when there is little light or to stay on all the time. Instructions were included on how to adjust the settings. I am accustomed to night lights coming on almost instantly when it gets dark and turning off almost instantly when there is light. This one takes about 10 or 15 seconds to come on or turn off automatically. Installation was easy. At maximum brightness it provides a good amount of light. The light is attractive and is well made and sturdy.

Scritto da: B. Johnson

Simply the best

We have installed a few nightlights of this type and this one is by far the best we have found. We will only use these from now on.

Scritto da: Amazon Customer

A little more detail in the manual...

Fits perfectly. Easy to install. However the settings are a bit confusing. It can always be simply turned on, but the setting for auto on as explained I the pamphlet gets a bit confusing. I would buy this again, and probably will for other locations in the house, because it does what it's supposed to do.

Scritto da: A Customer

Decent Quality product that works well.

I like the flush profile, cool and modern look of this unit, it's a tad pricey for what it is, but it does everything it says it does very well and it's an established brand that I trust to have as part of my house wiring. I did see a newer and slightly more curvy design from another manufacturer, very similar features for a higher price, that might appeal to some more than others but worth checking out to see which one suits you best. You can find full specs in a PDF on the Cooper Industries web page, I've attached a snapshot of the main details - make sure you look for the 7737W model though.

Scritto da: Howard C

Works well as a hallway night light.

Hallway night light. Works well. Photocell controls the light. Would buy again if needed.

Scritto da: NASA engineer

great addition

great product, very nice addition to the new bathroom. i installed it at normal outlet height between the toilet and sink. easily lights up the entire bathroom so you don't have to turn on the main lights for a late night bathroom run. some people say there is a long delay before it turns on but i think it is very acceptable, the way it is prevents the light from flickering on and off. i will defiantly but more as my home is upgraded.

Scritto da: Wendi A.

Very bright, better then expected.

Lights up my front entrance way. Very bright. Excellent decision to put this in our light switch.

Scritto da: B

This is a nice little addition to the bathroom

This is a nice little addition to the bathroom. Easy to turn on and off. Easy to adjust the brightness up and down. It has a nice range of brightness from low to high

Scritto da: Matt Robertson

Exactly as advertised

This light works great. I like the soft white color, although others prefer the bright white LEDs typically deliver. I think this is less abrupt in the middle of the night. High quality Cooper device!

Scritto da: Sarah M

Great Little Hall Light

Pretty good little light for the hallway. The dimming feature is nice. If you have it all the way on the highest setting, it is a little to bright I find.

Scritto da: Ron

Sleek looking. Clean

Having an adjustable Nightlight is ideal!