Drill America - DWTSMH11X1.25 m11 X 1.25 Matrice esagonale per filettatura in acciaio al carbonio, serie DWT M11 x 1.25 Matrice esagonale standard DWTSMH11X1.25

Name: Drill America - DWTSMH11X1.25 m11 X 1.25 Matrice esagonale per filettatura in acciaio al carbonio, serie DWT M11 x 1.25 Matrice esagonale standard DWTSMH11X1.25
Brand: Drill America
SKU: 0887861108362
Price: 42.36 EUR
Availability: InStock

Brand:Drill America

3.7/5

€
42.36

Ideale per la manutenzione in officina o sul campo. Non è richiesto alcun supporto speciale per questo tipo di matrice, sarà sufficiente qualsiasi chiave abbastanza grande. La matrice esagonale serve per ravvivare fili ammaccati o arrugginiti. Gli utensili da taglio destrimani hanno un'azione di taglio che si attiva quando vengono fatti scorrere in senso orario. Realizzato in acciaio al carbonio.

Quantity

Aggiungi al carrello Compra subito

EAN: 0887861108362

Categories: Prodotti industriali e scientifici, Utensili da taglio, Muore, Filiere per filettatura esagonale,

Is Discontinued By Manufacturer	No
Item model number	DWTSMH11X1.25
Manufacturer	Drill America
Product Dimensions	6 x 4 x 2 inches; 0.35 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: M. F.

Does what it needs to do. Ok threads

A M6-1 nut was cross threaded and unfortunately the mounting bolt that got damaged is discontinued. That means hunt the pick-parts yards or try and fix this one. For $6 worth a shot. When this arrived it was test fitted against some know fresh M6-1 bolts. Some of them this threaded on ok and others it would begin to cut. On a known fresh bolt it should not have any issues. This die may not be very high spec but being able to salvage the bolt was more important than % of thread engagement. It is an interior bolt so no high stress or issue so long as it can torque to 6-8 ft-lbs. Sometimes if it begins the cut influenced by the damaged thread it won't match up. I didn't have a thread file to clean up the initial start. Took a chance. Ran the die down the bolt with Tapmatic cutting fluid and it progressed well. Threads joined into the good ones so I was happy in that regard too. The resulting threads are usable but until I get to re-assembe this interior I won't know. The fresh nut has wobble that concerns me if the threads will even take 6-8 ft-lbs. In all decent but probably better re-thread dies out there. It is chamfered at both ends. Check which orientation seems the better side for your application. The China side down was the orientation I used. In that orientation it was able to spin down some of the bolts without it cutting.

Scritto da: t wayman

Works well

Very good for cleaning messed up axle threads. Needs a big 1 5/8 socket to fit over it though

Scritto da: EJ Honda

Fits and works well

This die works and fits as expected, so I'm scratching my head why the Drill America tap that I bought with this doesn't seem to fit well on my tests. Oh well, that's for a review of that specific item. In the meantime, this item fits and works well.

Scritto da: Willie Blues

Cleaned up bruised threads no problem!

I recommend this die! It seems to be good quality. Cleaned up and fixed some fairly bruised threads on a drive shaft flange connection (M18 x 1.5). I was concerned as the bad threads were near the end where I needed to start the die. And these are hard steel threads on a drive shaft. The die is chamfered so it's easy to start in/on bad threads.

Scritto da: trailrunner

great little thread die

works perfectly. I simply could not find a thread die in 11 x 1.25 for my motorcycle shocks. cut the threads very nicely.

Scritto da: Bill

Saved my axle.

Worked great.

Scritto da: Deric Frisbie

Perfect

Saved me $180 after getting too rough removing my rear axle on my s2000, cleaned up the threads like a champ

Scritto da: Tim Presley

Essential

Had to have this to resurrect an old mower whose spindles had to be rebuilt.

Scritto da: Luis Jorge Hernandez Campos

Buena calidad, producto equivocado.

El producto es de buena calidad, le puse 3 estrellas por que yo pedi M20x1 y mandaron M20x1.25. Aclaró que el empaque si decía el modelo, pero al sacarlo el grabado decía M20x1.25 por lo que estaba mal empaquetado el producto.

Scritto da: mimo

Cheaply made and finicky. Also - sad that Drill America is made in China

Got it to repair threads on a mangled wheel stud. Dressed the stud first with a thread file then used the threading die. You have to go slow, back it off, and rethread a couple times. It worked, but you can see the cheapness and rough teeth of the Chinese-made die. Get a large socket or use a crescent wrench. Next time, I would buy a more expensive but better quality product from Irwin Hanson, Norseman, or Cle-Line. Chinese people are awesome - their government, not so much. Support local industry where you can, all right?

Scritto da: ItalianCarSam

Good quality Tool

This is a good quality die, but one must be aware that it there is very little taper to input threads and so to use this to chase the starting threads on a bolt is difficult. In my case I simply used a file to correct the first 1 or 2 starting threads and this was enough for the die to "grab"... and at that point things worked as expected.

Scritto da: David B.

Works well

The only problem I had was finding something large enough to fit it. I redressed the threads on my axle shaft without effort. Cut like butter. Highly recommend this die

Scritto da: Denis

Prendre son temps

Je devais rectifier les filets du vilebrequin d’un Skidoo 1971, j’ai pris connaissance des commentaires avant d’acheter et d’effectuer les travaux. Prendre son temps et avec un bon lubrifiant j’ai pu corriger les filets sans rien briser. Denis