Display e interruttore digitale remoto Progressive Industries, EMS-RDS

Brand:PROGRESSIVE INDUSTRIES

3.5/5

114.78

Protezione contro le sovratensioni: 3 modalità / 1.790 J / 44.000 A. Valori nominali: 30 A / 120 V / 3.600 W. Temperature di esercizio: da -40°C a +105°C. Semplice installazione plug-in. Consente all'utente di aggiungere un ulteriore display digitale remoto. Display digitale, scorrimento continuo delle informazioni sulla fonte di alimentazione: tensione/e corrente, frequenza, codice di errore, codice di errore precedente (se applicabile). Lettura digitale integrata. Il cavo di collegamento dati da 1-14' e il cavo di collegamento dati da 1-3' sono inclusi. Da utilizzare solo con EMS-HW30C e EMS-HW50C. Garanzia a vita.

Da utilizzare solo con EMS-HW30C e EMS-HW50C. Garanzia a vita. Il cavo di collegamento dati da 1-14' e il cavo di collegamento dati da 1-3' sono inclusi. Display digitale, scorrimento continuo delle informazioni sulla fonte di alimentazione: tensione/e corrente, frequenza, codice di errore, codice di errore precedente (se applicabile). Lettura digitale integrata. Semplice installazione plug-in. Consente all'utente di aggiungere un ulteriore display digitale remoto. Protezione contro le sovratensioni: 3 modalità / 1.790 J / 44.000 A. Valori nominali: 30 A / 120 V / 3.600 W. Temperature di esercizio: da -40°C a +105°C.
Brand PROGRESSIVE INDUSTRIES
Brand ‎PROGRESSIVE INDUSTRIES
Brand Name ‎PROGRESSIVE INDUSTRIES
Color ‎Unspecified
Connector Type Plug In
Connector Type ‎Plug In
Control Method Remote
Control Method ‎Remote
Current Rating 30 Amps
Current Rating ‎30 Amps
Customer Reviews 4.5 4.5 out of 5 stars 20 ratings 4.5 out of 5 stars
Included Components ‎Digital Switch, digital display, 14' data link cable, 3' data link cable
International Protection Rating IP54
International Protection Rating ‎IP54
Item Dimensions LxWxH 3 x 3.5 x 7.5 inches
Item Dimensions LxWxH ‎3 x 3.5 x 7.5 inches
Item Package Dimensions L x W x H ‎7.4 x 3.35 x 2.95 inches
Item Weight ‎0.48 Pounds
Manufacturer ‎Progressive Industries
Material Other
Material ‎Other
Model Name ‎Progressive Industries boating electrical equipment
Mounting Type Plug-In Mount
Mounting Type ‎Plug-In Mount
Number of Items ‎1
Number of Positions 3
Number of Positions ‎3
Operating Voltage 120 Volts
Operating Voltage ‎120 Volts
Package Weight ‎0.22 Kilograms
Part Number ‎EMS-RDS
Style ‎Ems-rds
Suggested Users ‎Unisex-adult
Unit Count ‎1.0 Count

3.5

8 Review
5 Star
75
4 Star
16
3 Star
0
2 Star
0
1 Star
10

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Ed Schellhase
Works as ir should
Plug and play installation. No issues. Displays on either display, depending on the switch settings. Too bad it won't mirror so you could see at either location
Scritto da: DJL09
Fantastic secondary display
I wanted the ease of seeing when the EMS was ready from outside the coach while hooking up to shore power, then to see what was occurring with shore power from inside the coach. This for the ticket perfectly. I have one display with the selector switch near the wet bay, outside the coach. I can see it perfectly while turning on shore power. Once it is on and the EMS has allowed power to the coach, I then use the selector switch to turn on the select display. My second display is inside the coach by the distribution center, which happens to be in the pantry. Being in the pantry helps to shield from the distraction of the display being illuminated and scrolling all the time. It is a little pricey, but beats going outside in the event of a problem with shore power in the middle of the night.
Scritto da: MikeF
Good product but quality control loose
This is a good product (allows me to have a display in the compartment where I have the EMS when hooking up at the park then switch to the display up in the trailer that I can see during normal operations). Reasonably well put together (the bottom falls off the display and you need to make sure you put it back on right when it is not mounted). Problem I had was when I hooked it up to the EMS, I got a "E 9" error (no data link) on both displays. After troubleshooting, I found the 3 foot data cable included with the device was defective - wiggling the connector caused intermittent displays and never got the data link to work. Fortunately, I had a RJ11 crimper and spare 4 conductor wire and just made a new cable. All works as expected now. Obviously, the included data cable was not checked thoroughly (if at all). [UPDATE] I bought this to go with their HW30C 30 amp RV Surge and Electrical protector. For some reason, Amazon takes me to this review when I try to review the HW30C. Since they are used together, I wanted to add a comment about their poor tech "support" - I had emailed them with 3 items clearly indicated - the first an error in their support address on their manual, the second a question about mounting position not listed in the manual and the third was about a second display. All I got was the run around from their "support" trying to get answers to my simple questions.
Scritto da: Jason Spitz
Great addition to the Progressive EMS
Works as advertised. Nice to have one unit in the storage area where I can watch it as I plug in the RV, and another in the kitchen area where I can easily and quickly see what the problem may be if there is an issue with incoming RV park power.
Scritto da: N50486
Convenient to have inside display
This is a very useful addition to the Progressive EMS system I installed in the RV. Having recently stayed at a park with wildly fluctuating power, in order to make my complaint to park maintenance accurate, I no longer have to go outside to the the power compartment to see just how bad the incoming voltage is. I wanted to mount the second display inside above my switch panel so I needed a longer phone cable and the ability to run through the smallest hole possible. Having a spool of phone cable, RJ11 connectors and a crimping tool made the installation easy. I mounted the displays and switch box with industrial Velcro.
Scritto da: Donna
Exactly
Exactly what I needed
Scritto da: Capixaba
This will give me the option of not having to ...
This will give me the option of not having to run from one end of the coach to the other and also inside to outside to see what the condition of the power that I'm trying to use from an outside source. I will now have 2 monitors one in the coach and one outside.
Scritto da: Bob Ingulli
Perfect solution
Exactly as presented,easy install suits my needs completely.

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart