Danco 11079 Bocca Vasca, Nero Opaco Nero Opaco Con Deviatore

Brand:Danco

3.4/5

€
46.51

Il nero opaco sta diventando la finitura preferita soprattutto quando si tratta di decorazioni. Il nero è un colore di design moderno ma di transizione che non passa mai di moda, quindi è probabile che gli apparecchi neri opachi siano quelli di cui non ti stancherai troppo velocemente; quindi vai avanti e cogli l'occasione con il nero opaco. Aggiorna il tuo bagno con il beccuccio per vasca Danco con deviatore in nero opaco. Questo progetto fai-da-te ti permetterà di aggiungere un nuovo stile al tuo bagno e sostituire un vecchio beccuccio per vasca che non funziona più. I vecchi beccucci usurati della vasca hanno la tendenza a erodersi e rompersi creando perdite indesiderate. Sostituire il beccuccio della vasca sporco e sporco aiuterà a migliorare l'aspetto della vasca/doccia e aiuterà a prevenire le perdite che faranno risparmiare acqua e denaro. Questo beccuccio deviatore per vasca è compatibile con slittamento in rame da 1/2 pollice, filettatura da 3/4 di pollice e filettatura da 1/2 pollice e filettatura del naso da 1/2 pollice. Viene fornito completo di adattatori e nastro filettato per tubi per un'installazione senza problemi. La costruzione in metallo offre resistenza e durata nella vasca e nella doccia del bagno. Danco è uno dei più grandi fornitori di riparazione, sostituzione e ristrutturazione di impianti idraulici nel settore del miglioramento della casa, focalizzato principalmente sul potenziamento dei consumatori "fai da te" con soluzioni idrauliche tanto pratiche quanto convenienti, dando alla tua casa un fascino moderno e fresco e rinnovata eleganza. Forniamo soluzioni per la casa innovative orientate al design e alla moda che sono facili da usare per supportare e incoraggiare i clienti ad affrontare le attività di miglioramento della casa da soli, senza il prezzo elevato dei servizi professionali. Quindi, qualunque sia il tuo prossimo progetto per la casa, sia che si tratti di sostituire rubinetti, servizi igienici, parti della doccia, prevenire intasamenti con uno dei nostri raccogli capelli, rimuovere le rifiniture,

Quantity

Aggiungi al carrello Compra subito

EAN: 0037155110797

Categories: Strumenti e miglioramento della casa, Attrezzature per cucina e bagno, Attrezzature per il bagno, Rubinetti vasca e soffioni doccia, Rubinetti per vasca,

PORTATA DEL BECCUCCIO DELLA VASCA: il beccuccio del rubinetto della vasca ha una portata di 5 pollici. DEVIATORE INCLUSO: Questo beccuccio per vasca include un'asta di sollevamento del deviatore anteriore per consentire al flusso d'acqua di fluire verso il basso nella vasca o verso l'alto nel soffione della doccia, basta tirare verso l'alto per deviare l'acqua verso l'alto e verso il basso per mantenere l'acqua che scorre nella vasca. ADATTATORE E NASTRO PER IDRAULICO INCLUSI PER UN'INSTALLAZIONE SENZA PROBLEMI: questo kit di installazione fai-da-te con beccuccio per vasca viene fornito con un adattatore, un O-ring e un nastro idraulico per garantire una perfetta aderenza e senza perdite. DIMENSIONE DELLA CONNESSIONE: Questo beccuccio della vasca del deviatore è compatibile con connessioni slip-fit per tubi in rame da 1/2 pollice, connessioni filettate maschio da 1/2 pollice, connessione per tubo maschio da 1/2 pollice con estremità filettata e connessione filettata maschio da 3/4 pollici. DESIGN CLASSICO CON STILE MODERNO: Il beccuccio deviatore Danco è l'ideale per sostituire e aggiornare il tuo beccuccio usurato e non funzionante e il design classico darà un nuovo aggiornamento alla tua vasca.

Batteries Included?	‎No
Batteries Required?	‎No
color	Matte Black
Color	‎Matte Black
Country of Origin	‎USA
Customer Reviews	4.3 4.3 out of 5 stars 2,174 ratings 4.3 out of 5 stars
Finish	‎Matte
Handle Material	‎Copper
Included Components	‎
Item model number	‎11079
Item Package Quantity	‎1
Item Weight	‎10.6 ounces
Manufacturer	‎Danco
Material	‎Metal
Part Number	‎11079
Product Dimensions	‎5.25 x 2.5 x 2.5 inches
Style	‎With Diverter
Warranty Description	‎Limited 1 Year

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Richard Skoda

Inexpensive

Inexpensive fix. Very nice piece. The printed instructions with the piece are worthless. Watch the video that is attached to the product at Amazon.

Scritto da: Renie

Works perfectly!

This tub spout with diverter has it all. I personally have never come across one of these that did not allow at least a few drops of water through the bottom spout, once the shower diverter is pulled up to change the water flow. This Danco spout allows absolutely NO water dripping once the spout has been pulled, and it stays that way for the entire duration of the shower. Unbelievably satisfying. I have not even heard of this being a possibility after reading many reviews and item documentations of tub spouts with diverters. They all say that even a brand new one out of the box will drip a little. Not this one. I may have a magically blessed spout, and no others ever produced will do what this one does, but I would rather think that you could get the same results if you purchase one. I highly recommend it. It was very easily installed, just used the supplied plumbers tape on pipe connections and installed in the reverse order that I removed the old one. There are plenty of tutorial videos if you need any additional guidance. It also automatically drops the spout diverter back down when water is turned off (which my old diverter would not do). Only downside for me, and it is totally my fault, is the length of the spout is just a few milliliters shorter that the one it was replacing. That causes a gap of about 3mm between the shower tile and the base of the spout. Haven't decided yet if I will silicone the gap - reviews and information make me hesitant. Still, overall, it's not a big deal. I Highly recommend this spout and would purchase one again.

Scritto da: Mark C.

Very easy to install

It took all of 2 min to install this replacement spout. The color really update the tired old "brass" look.

Scritto da: Rob H

Multiple issues with directions and design

Somebody from Danco should try installing the product using the directions they provide. Looks like they changed them a bit from a few years ago but still horrible! Directions are riddled with errors and lack of clarity. As far as the product is concerned it has the following issues. 1) directions Starr you should “screw through the Retaining ring and back the plastic extension nipple“. This is impossible with the thickness of the extension nipple being too thick, maybe the mold shifted over years. The hole must be drilled to properly open it. This should be done by the mfg. 2) the design required that the rubber O ring shown be tightened against the wall inside of the Extension nipple. This requires proper tightening of the Extension onto the adapter YET the hole in nipple must stay aligned with the slot in the adapter. Since the slot is only half way around the adapter in found the O right never seated tight enough when the hole was visible so it leaked. It appears their mild has shifted over the years because the older extension which was I cleaned up aligned just fine, and O ring seated flush resulting in no leak. 3) trying to take off an old Spout by twisting off the spout from the extension as suggested is very unlikely possible. More likely the O ring and adapter will twist and the screw will gouge the copper as its twisted off. Wise installation would be to ensure the Retainer ring screw is position on the bottom of the spout, not on top as suggested in directions. That way the screw can be later loosened threw the slot on the bottom of spout, granted need to use a rt angle driver but it’s a clean removal and a clean copper tube when done. Now that the price has risen on this product a smart US company should design this correctly with clear directions and produce it here in the USA, once and for all.

Scritto da: Dare to Dream

Skip this one

The method of attaching adapter A to the pipe is poorly done. As others have said, it’s hard to screw in the screw and have it stay when screwing on the spout. It leaked into our wall and onto our ceiling downstairs. Instructions also don’t mention filling the hole in the wall with plumbers putty. It was only after removing it I noticed the old putty. We bought another Danco 10317 6” tub spout from Lowe’s and the design was far better. Instead of the X at the adapter A, it’s flat on the sides like an H, so you can hold it in place with a wrench while screwing on part B, the plastic pipe. It also has a rubber gasket that goes between those two parts to prevent leaks into the wall. For the same price $30, it’s quality overall is far superior, heavier metal, better stopping water when diverted is pulled for shower, way better installation method. Skip this model. And use plumbers putty to fill the hole in the wall so leaks can be detected in the tub.

Scritto da: Greg

5 Minute Installation and only using 2 tools.

5 minutes to install this tub spout. Channel lock pliers to remove old spout, wire brush the pipe end copper fitting threads, apply new pluming tape, spin-on the new tub spout, and finely inserted rubber handle end of the channel lock pliers into spout to bring the spout into final position and test for leaks. Everything that is needed is in the package except the channel lock pliers and the wire brush. Skill level needed is a 1 out of 10, very easy to replace this tub spout using this kit and at a reasonable price.

Scritto da: Samira Barghouthi

Installation instructions are totally inaccurate

Installation is a big problem!! You are supposed to pierce a hole via a screw-pushing!! That does not work at all and it took me three attempts to finally use a hot flame and heat up the tip of a Philips screw driver and poke a hole so I could then drive in the screw through the hole and stabilise the extension on the copper plumbing pipe.

Scritto da: Judy B. Biggs

Purchased with the shower head.

I am very happy with it.

Scritto da: EMK

Basic universal, easy to install

The washer in my current tub spout needed replacing. I decided to change the entire spout as the current one is at least 20 yrs old and I wanted to keep the gold look to match the other tub accessories! I will say Amazon is good to look for items in not as popular finishes. I couldn't find a gold spout in any of the local stores. The package came with instructions. Even if you are experienced it doesn't hurt to read it once over. I'm not a handyman nor a man but I was able to follow the instructions and install the new spout...with a little help from You Tube! The most difficult part was removing the old spout. Overall the product was as described and priced right. It's basic which was all I was looking for in addition to the gold finish. Do make sure you measure the length of the copper pipe before you purchase to make sure this one is the correct fit.

Scritto da: gary

Great replacement

Ordered and came next day. Instructions clear and have many videos on you tube, very helpful. Easy to install but all the extra installations steps to avoid leaks were great. Comes with enough plumbers tape to get the job done. Addition of some sandpaper to clean the copper pipe would be good to complete the kit a to really make it an all in kit. Very good replacement, good quality and works as advertised.

Scritto da: Nick

Measure or bring in original to hard ware store

Did not fit

Scritto da: AmazonLover

Good product

It installed easily without any leakage and price is good too

Scritto da: Lorna Albanese

Quite sturdy and all the parts are included

i replaced this product with the old one. Works well and happy with this product.