Danco 10062 Paraurti universale, da utilizzare con sedili WC, gomma, 1 confezione, bianco

Brand:Danco

2.8/5

22.61

DESCRIZIONE DEL PRODOTTO Questi paracolpi adesivi per il sedile del water offrono una facile alternativa alla sostituzione di un intero sedile del water. Sono inclusi (2) paracolpi rotondi e (2) paracolpi oblunghi. Sono dotati di una robusta struttura in gomma che fornisce resistenza e durata che aiutano a proteggere e proteggere il sedile del water. Questi cuscinetti di ricambio per paraurti sono in grado di sostituire i paraurti a scatto, a vite e a pressione del coperchio del sedile del water. Questi paracolpi universali per WC funzionano con la maggior parte delle marche e dei modelli di sedili WC, ma funzionano meglio con un sedile WC con una superficie liscia. Questi paraurti di ricambio sono perfetti per la riparazione del sedile del water. Ordina il tuo oggi! DAL PRODUTTORE Danco è uno dei maggiori fornitori di riparazione, sostituzione e ristrutturazione di impianti idraulici nel settore del miglioramento della casa. Ci concentriamo principalmente sull'offrire ai consumatori fai-da-te soluzioni e prodotti idraulici a prezzi accessibili che creano decorazioni nuove e rinfrescanti per bagni e cucine.

Facile da installare. Include 2 paraurti per sedile. Si attacca al sedile del water con cuscinetti adesivi su misura. Si adatta a qualsiasi marca e modello di sedile del water. Utilizzato per la riparazione del sedile del water. FACILE DA USARE: pulire accuratamente gli anelli del sedile del water e tenerlo pulito e asciutto, staccare la parte posteriore autoadesiva sul paraurti del sedile del water e incollarlo sugli anelli del sedile del water, premere con forza per assicurarsi che aderisca saldamente (non utilizzare per 10 minuti dopo l'installazione). DESIGN UNIVERSALE: design universale per adattarsi alla maggior parte delle marche e dei modelli di sedili WC (funziona meglio con un sedile WC con una superficie liscia). COMPRENDE: (2) paracolpi rotondi per sedile WC (2-1/4 pollici di lunghezza e 3/4 pollici di larghezza con uno spessore/altezza di 1/2 pollici) e (2) paracolpi oblunghi per sedile WC (diametro esterno 3/4 pollici con spessore/altezza di 1/2 pollici). AMMORTIZZAZIONE EXTRA: Sostituisce i paraurti del sedile del water di tipo snap-in, avvitabile e tack-on e il bastone sulla struttura in gomma con finitura bianca si fonde con la maggior parte dei sanitari e dei sanitari esistenti. CUSCINETTI ADESIVI SU MISURA: si attaccano al sedile del water con cuscinetti adesivi resistenti e personalizzati che aiutano a salvaguardare e proteggere il sedile del water.
Assembled Diameter ‎1 Inches
Batteries Included? ‎No
Batteries Required? ‎No
Brand Danco
Color White
Color ‎White
Country of Origin ‎China
Customer Reviews 3.8 3.8 out of 5 stars 4,773 ratings 3.8 out of 5 stars
Cutting Diameter ‎1 Inches
Domestic Shipping Item can be shipped within U.S.
Included Components ‎Rough Plumbing;Parts and Repair;toilet-repair-kits
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 2.97 x 0.59 inches
Item model number ‎10062
Item Package Quantity ‎1
Item Weight 0.08 Pounds
Item Weight ‎1.28 ounces
Manufacturer ‎Danco, Inc.
Material Rubber
Material ‎Rubber
Measurement System ‎Inch
Part Number ‎10062
Shape ‎Round
Size ‎1 Pack
Style ‎Modern
Warranty Description ‎Limited 1 Year

2.8

12 Review
5 Star
49
4 Star
15
3 Star
14
2 Star
9
1 Star
13

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Linda J
Does the job!
They are working well on my very old (and blue Koehler) toilet seat. I opted to use a different adhesive instead of what came in the package, and they are holding up well. My suggestion to the manufacturer would be to include a small tube of E6000 adhesive, which does a great job.
Scritto da: Janet Prendergast
Don't last long
I had an old (about 30 yrs) wooden toilet seat and the original bumpers were cracking and falling off. The seat was in good shape and it's hard to find the good wooden ones anymore. So I saw these and figure this was the solution. Within a week they started falling off. One landed up getting flushed. I even tried to Gorilla Glue them on but that too failed. Maybe they will work better on the plastic seats but it didn't' hold on the wooden seat. I landed up replacing the seat with a plastic one.
Scritto da: Caroline Moniz
Works well
Way better then plastic bumpers that crack. These are of very good quality.
Scritto da: Tom
Just what I needed
My hard plastic toilet seat bumpers had cracked and come apart. These were just what I needed. After a couple of months they are holding up well. Very happy with them.
Scritto da: Vince Prybeck
Easy to install and work well, if they stay glued.
Easy to install, but they may fall off after a few months requiring glue to re-install afterwards. I've already done 2 of the 4 I got, but they stay after they are re-glued so far.
Scritto da: Kathleen
Not white
Says white....not, it is an off white.
Scritto da: adumas18
Doesn't stick
The tape it comes with does not stick at all to the toilet lid or even the product itself. I had to use wall hanging double sided tape I had to get these to stick. The actual product is sturdy but the tape is useless.
Scritto da: Just Joe
Did not use. Too small to match previous bumpers.
Not used.
Scritto da: Luc Labelle
They work great but, could have better adhesion from 3M.
They work great but, they could have better adhesion from the 3M double sided tape that comes with it . I had a hard time making it stick and finally they did when I installed them under the seat and sat down on it to apply pressure on them and they finally glued on correctly and are still holding great . I would have preferred screwed on than these but, the rubbers are of really good quality , it's just the double sided tape for me that's not quite the right one for the job , I think . I'm used to double sided tape for car moldings and it sticks a lot more than these ones but like I said , they did the job . Thank you .
Scritto da: Patrick
Only diamonds are forever, not these toilet seat bumpers.
Got these bumpers so that it would fill the gap between my toilet seat and rim caused by bidet installation. They really did not last long at all. They stick on for a bit then you find later they have fallen in the toilet. They don' t stay where they are supposed to. Perhaps its because I did not use crazy glue on them like some other people have suggested. Or even use crazy clue then hold in place with binder clips over night. This could help. At first I had them on the underside of the toilet seat itself. This seemed to work for a while then they would fall off. Eventually I tried sticking them to the toilet so that my weight would constantly keep them sticky and in place. I'm not sure how but they still somehow end up falling out into your toilet at some point. I would definitely agree that the stickiness that comes with these is not a long lasting method. The other side of the coin is that they are in kind of a dirty area. Eventually they are going to get dirty and you are going to want to replace them anyway. Just a thought.
Scritto da: Amazon Customer
Don't stick
These bumpers would be great but the glue pads just do not stick. The first one fell off in less than a week and after three weeks they are all gone. This was after carefully cleaning both surfaces. Won't buy these again as I literally flushed my money down the toilet.
Scritto da: Dale
Satisfied
I was unable to locate the exact size I needed (3/8”) for my toilet seat bumpers anywhere, so had to shave these half inch ones down to work correctly. They work perfectly now.

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart