Century Drill & Tool 95207 Maschio a spina metrica in acciaio ad alto tenore di carbonio, 14,0 x 1,25 SP 14,0 per 1,25 SP

Name: Century Drill & Tool 95207 Maschio a spina metrica in acciaio ad alto tenore di carbonio, 14,0 x 1,25 SP 14,0 per 1,25 SP
Brand: Century Drill & Tool
SKU: 0081838952075
Price: 27.05 EUR
Availability: InStock

Brand:Century Drill & Tool

3.8/5

€
27.05

Filettature con taglio di precisione, accuratamente formate per una filettatura uniforme ed esatta. Trattato termicamente e temperato per limare fili duri e una vita utile più lunga. Progettato per applicazioni di taglio a mano. Da utilizzare con giramaschi per tagliare le filettature interne. Coinvolgimento del thread del 75%. Lo stile della spina è lo stile più comunemente usato del rubinetto da -3 a 5 filettature smussate.

Quantity

Aggiungi al carrello Compra subito

EAN: 0081838952075

Categories: Prodotti industriali e scientifici, Utensili da taglio, Rubinetti, Maschi per filettatura manuale,

SP sta per filettatura delle candele. Utilizzare 1/2 punta da trapano per ottenere i migliori risultati. Il maschio a spina è lo stile di maschio più comunemente usato: da 3 a 5 filettature smussate sulla punta. Progettato per applicazioni di taglio a mano. Trattato termicamente e temperato per limare fili duri e una vita utile più lunga.

Batteries Required?	‎No
Color	‎Steel
Country of Origin	‎Japan
Customer Reviews	4.7 4.7 out of 5 stars 142 ratings 4.7 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Tap
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item model number	‎95207
Item Package Quantity	‎1
Item Weight	‎0.8 ounces
Manufacturer	‎Century Drill & Tool Corp
Material	‎Metal
Measurement System	‎Imperial
Part Number	‎95207
Power Source	‎Hand Powered
Product Dimensions	‎3.5 x 0.5 x 0.5 inches
Size	‎14.0 by 1.25 SP

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Ed

Great deal

Works good to retap the rusted thread with oil. Cuts right thru.

Scritto da: fuzebox40

Good so far.

So far, I've only used it to clean up some existing threads that were pretty messed up. The tap is still sharp as ever, but the real test is cutting new threads, but that's for another day. This is a replacement for one I broke from a good quality set I have. The broken tap was not abused but I neglected to use oil while tapping when it broke. Over the years I have come to believe in using oil for drilling and tapping in metal. I can tell you it does make a difference; you'll get cleaner work results and your tools will last longer.

Scritto da: Patrick Henry

Worked as intended

This tap came quickly and was the right size. I had no issues using it to chase threads that were goobered up with paint. Haven't used it to actually cut threads but from the looks of it I assume it will work.

Scritto da: Amazoncustomer

Used to clean out VERY rusty threads on truck. Did 6 holes and all cut easily.

This is a quality tap, not a cheap China one. Cuts easily (Just remember to clean out the hole frequently and keep it lubed) It also has the size stamped onto it, not just "laser etched" that will wear off quickly. I used this to clean out the threads on the factory welded nuts to mount a hitch to my Honda Ridgeline (and It has been through 7 years of winters in the NorthEast before my purchase). In case for some crazy reason you are doing the same thing the sizes needed are: M12 x 1.25 and M10 x 1.25 - 2007 Honda Ridgeline. I cut 6 holes with the M12 x 1.25 and the last hole was just as easy as the first one. Take care of them, and use them properly an they work well. Hope this helps someone, if so, please rate it "Helpful"!

Scritto da: James P davis

Package says, "made in Japan", 12mmx1.25mm tap inside package is stamped INDIA

Misleading manufacturing data - Japan is what the package says, item inside says INDIA. India manufacturing quality not typically the same as Japan.

Scritto da: Jason

Great product. Aligns to threads well, doesn't break even with a lot of pressure and torque.

I used this tap to "chase" the threads on my 2007 Odyssey's frame receiver hitch mounting points. I put a liberal amount of super lube on the heavily rusted threads and some on the tap, which I simply put in my DeWalt cordless drill chuch and spun on low speed. This tap powered through the completely rusted threads without stopping or breaking and self aligned with the existing vague remaining threads without a problem. Great product did what I needed it to do, I only had one shot at this and it performed very well on all 4 mounting points.

Scritto da: My 2 cents worth

I did not use this. I had wanted a ...

I did not use this. I had wanted a 12 X 1.25 tap. I had selected it in the dropdown, but somehow in the purchase process it reverted to the top item in the list. Once I saw that on the shipping notification I then ordered the correct one and it did what I needed. I expect that both sizes should work the same.

Scritto da: R. LaRue

Works fine for light use

I needed to buy a single tap because my el-cheapo PRC tap-and-die set didn't come with this particular size (M 10 x 1.25). Taps are simple tools that have always been over-priced. Thank heaven, then, for the availability of cheap Chinese tools for hobbyists who don't need to use them on a daily basis. (And thank Amazon for Amazon Prime, a service that makes getting an obscure item like this to my door quick and inexpensive.) I'm not sure how this tool would fare in a production setting. But for my simple threading job--and any similar ones I can imagine--this tap works just fine.