0
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister
0

Totale:€ 0.00

Vedi carrelloCheckout
LoginRegister

BOSCH TS1004 Borsa raccoglipolvere per sega da banco

Brand:Bosch

3.5/5

€
45.81

DAL PRODUTTORE Questo sacchetto raccoglipolvere per sega da tavolo Bosch TS1004 fornisce fino al 70% di raccolta della polvere. Per il modello n. 4000 sega da tavolo da 10 pollici.

Quantity
Aggiungi al carrelloCompra subito

EAN: 7147905958074

Categories: Strumenti e miglioramento della casa,

Compatibile con le seghe da tavolo Bosch 4000 da 10 pollici.
Batteries Included? ‎No
Batteries Required? ‎No
Blade Length 10 Inches
Blade Length ‎10 Inches
Brand Bosch
Brand ‎Bosch
Color One Color
Color ‎One Color
Country of Origin ‎China
Customer Reviews 4.4 4.4 out of 5 stars 3,664 ratings 4.4 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components Bare-Tool
Included Components ‎Bare-Tool
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎TS1004
Item Package Quantity ‎1
Item Weight ‎7 ounces
Manufacturer ‎Bosch
Number of Teeth ‎30
Part Number ‎TS1004
Product Dimensions 14.25"L x 4"W x 4"H
Product Dimensions ‎14.25"L x 4"W x 4"H
Warranty Description ‎1 year warranty.

3.5

13 Review
5 Star
68
4 Star
18
3 Star
8
2 Star
3
1 Star
3

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Robert Wright
Great dust bag!!!!!
What a great dust bag that fits my new Skil table saw. Fits perfect and collected almost everything that came through the dust portal under the blade.. Totally worth the 12 bucks and change to not have to sweep tons of saw dust off the floor. Just unzipped it and it all came out.. Would totally recommend if you are a simpleton woodworker like myself and dont have a fancy elaborate dust collection system in your shop. Not to mention that it is really long and went almost all the way to the floor making it able to hold quite a bit of dust. I will empty it every time I use it because its so easy, but its still nice to see that you get a good value for your money and they product is quality and well designed.
Scritto da: Charlene Phelps
It's $11 and feels that way. Consider it disposable. But it works great, the fabric is VERY cheap.
Lets face it. It's a dust bag. This sure beats hooking up a vacuum every time or cleaning up the driveway. We used ours on a Dewalt table saw and needed to bend the tabs to ease the on-off process. The only real complaint is the fabric is very cheap and I'm sure it has to be in some capacity to vent, however the fabric is REALLY cheap. In 2 days we have a hole in ours already. But we plan to get another one because of the capacity and the connection. This also fits our Dewalt 13" planer too. So we will also but 2 more.
Scritto da: qsin100
Nice to have
Getting away with loud noice from the vacuumm is awesome.. recommended.
Scritto da: Just Asking
Works great
I had my doughts on this dust bag but I sure was wrong, it collected at least 90% of the saw dust from my table saw if you don't have a good dust collector I highly recommend
Scritto da: LEM
My circuit breaker is thankful for this bag.
Like many reviewers here I use this bag with DeWALT jobsite table saw (model 7480, but I'm sure other trims will do as well). It does a great job, collecting probably a good 80-90% of all sawdust. The way most modern table saws are designed is that the blade is enclosed in the dust chute, and the rotation of the blade actually creates an air flow towards the chute exit with blade teeth working like fan blades. So it sucks most dust out that way. When I turn on the saw I can see the bag inflate, which is why it is important to have a bag that lets the air out (unlike plastic garbage bags) and keeps the dust in. So the saw sort of works like a vacuum by itself. I am sure, that attaching a shop vacuum will create even more suction, collecting even more dust, but when I tried - my circuit breaker made a firm protest. It told me that running a shop vacuum and a table saw on the same circuit is a no-no, and tripped right up. So I run them sequentially. First the saw with the bag attached, then I collect what dust remains on the table and a bit under the saw with a vac. I usually do the later at the end of a day or after especially heavy jobs, because there is not much left there. When I compare what ended up in the bag vs inside the vacuum - the bag is a clear winner by huge margin. Most dust ends up in there. And the circuit breaker approves of such an approach too.
Scritto da: Chobasco
The most simple yet PERFECT dust collection solution for table saws!
I am using this currently on my DeWalt compact jobsite table saw, and no other items were necessary to attach this. Before purchasing this, when I didn't want to go through the hassle of connecting a vacuum and turning it on every time I made a cross cut on a 3" wide wood floor board, I used a rubber band and disposable contractors trash bag to collect dust. This collector bag works very well even without having air power like a shop vac. The efficiency of this would probably be dependent on what kind of saw blade you are using, and how wide the clearance on your throat plate is. I am currently using a Freud 10" combination rip/cross blade with 50 teeth, with the original throat plate that came with the table saw (probably 1/2" opening). The more teeth your blade has, the finer the particles of dust, and the smaller the throat plate opening, the less chance of dust coming back up from the base of the saw during the rotation. The important fact about this is the composition of the bag. Its very solid, has a very high thread count, but its VERY breathable. I tried to blow into the opening as hard as i could, and the bag seriously didn't expand/move. So this means there is no resistance to airflow, and therefore doesn't kick the dust back up to your face. The shape is perfect, because there is nothing for the dust to sit on near the opening, and prevents any clogging. The bag is very easy to empty, and to get my point across, I tried clapping my hands with the bag 1/3 filled with sawdust, and no dust escaped through the fabric! That is awesome. And also, the height of the bag happens to be the exact height of the opening of the port on the table saw and the ground, so the bag doesn't sag on the ground, OR hang. The bottom just perfectly touches the ground.
Scritto da: BSJ
Snug fit for Dewalt Table Saw
Works well to collect dust from 2 1/2 inch port on Dewalt table saw. Clamp is very tight fit. So, threaded on to Hose nozzle for easy on off. I also use vacuum connection on blade guard with shop vacuum and the combination captures almost all dust.
Scritto da: Amazon Customer
Does what it's intended to
It works well enough for what it was intended for. The bag is long enough that it rests on the floor. The stitching seems a little weak in places. There is definitely a fair bit of blow back from the blade that happens because of the bag. It also seems that the dust port clogs a little easier, making the problem worse. It's simple enough to remove the bag and unclog it, though. It works for what it was made for, and does reduce the amount of dust that flies out behind the saw. Anything that blows out from the blade seems to settle on the saw or right underneath it, which makes cleanup easier.
Scritto da: R.H.
Useable
Needs to be alterd to fit correctly.
Scritto da: Leon Ofuonyemegi
A*
Great product
Scritto da: The Tech Guy
Works Well but you do get more Dust Blow Back off the Blade
This bag works surprisingly well reducing the sawdust from my Bosch Jobsite table saw. The bag itself is like an extra large sawdust catcher bag you'd find on a mitre saw only this one is 10" wide by 30" long. While this bag is designed for Bosch table saws it will work on almost any table saw (Rigid, DeWalt, Makita etc...) that has a 2.25" - 2.75" inch extraction tube or vacuum attachment. The top of the bag has a metal support bar with spring loaded connector which attaches to the vacuum outlet of your table saw. On the bottom of the bag there is a full length 10" zipper making it easy to empty the bag when full. While not as good as hooking up a vacuum to the table saw this Bosch TS1004 Collector Bag does a good job at catching about 75-80% of the debris from the table saw and works great for smaller jobs when you don't want drag out and hook the vacuum up. While the bag works well you do get more dust blow back coming up from the blade and projected out toward you when using the bag. Overall this bag reduces dust and debris and makes cleanup faster.
Scritto da: ????CM⛄
Cheaper alternative to a more expensive dust collecting system. Works on the Dewalt DWE780!
I do not have a Bosch table saw but a Dewalt DWE780 job site table saw instead. This bag fits perfectly in my Dewalt. The bag has a metal wire and frame that clasps the dust opening of the table saw. The bag actually does a great job of reducing the dust that comes with operating a table saw. I am so glad I found this dust collector as I have no plans to upgrade to a more expensive shop dust collecting system. When I initially installed the bag it blew out a lot of dust and I was thinking if I made the right purchase. Turned out I had not fully installed the bag as there was a small gap close to the opening. After tightening the noose around the opening the bag did its job. This is a great little bag that does its job very well and worth the money spent.
Scritto da: Saúl S.
Más o menos!!
No funciona muy bien con la sierra DeWalt, la bolsa es más larga que la base y al arrastrar ya no se "infla" con el mismo aserrín lo que provoca que se estanque, lo solucioné poniéndole unas pinzas de ropa para hacerla más corta, funciona bien un tiempo pero después se atasca muy fácil y termina siendo peor porque el polvo sale por todos lados de la sierra y se hace un desastre, terminé por quitarla, aunque siento que me sería útil por ejemplo cuando llevo la sierra a algún trabajo en campo y no hacer tanto desastre. Si me gustó pero no es excelente ni mucho menos, es una bolsa de tela con un aro de metal, nada más.

Prodotti correlati

hot
OK Lighting OK-5121F Lampada da terra in cristallo argento, 17" x 17" x 62"
3.8/5

€ 383.98

OK Lighting OK-5121F Lampada da terra in cristallo argento, 17" x 17" x 62"
3.8/5

€ 383.98

hot
JET JWS-10 Sistema di affilatura a umido a velocità variabile (727100)
3.1/5

€ 779.59

JET JWS-10 Sistema di affilatura a umido a velocità variabile (727100)
3.1/5

€ 779.59

hot
Lucci Air 210253010 Clima Ventilatore da Soffitto Luce Kit, Larghezza 6 Pollici, Bronzo Lucidato a Olio Bronzo Lucidato a Olio
2.6/5

€ 112.82

Lucci Air 210253010 Clima Ventilatore da Soffitto Luce Kit, Larghezza 6 Pollici, Bronzo Lucidato a Olio Bronzo Lucidato a Olio
2.6/5

€ 112.82

hot
Pfister S10-2300 3 kit di ricostruzione maniglia
3.4/5

€ 100.35

Pfister S10-2300 3 kit di ricostruzione maniglia
3.4/5

€ 100.35

hot
NTE Electronics 54-048 Interruttore a bilanciere a scatto in nylon, circuito SPDT, azione ON-nessuno-ON, attuatore in nylon nero, terminale a connessione rapida da 0,250", 15 Amp, 125 V CA
0.1/5

€ 27.79

NTE Electronics 54-048 Interruttore a bilanciere a scatto in nylon, circuito SPDT, azione ON-nessuno-ON, attuatore in nylon nero, terminale a connessione rapida da 0,250", 15 Amp, 125 V CA
0.1/5

€ 27.79

hot
MAGID TRX848L Serie Inferno
3.5/5

€ 65.08

MAGID TRX848L Serie Inferno
3.5/5

€ 65.08

hot
hansgrohe 88624000 Tubo Estraibile per Rubinetti Cucina, Piccolo, Cromo
3.8/5

€ 112.22

hansgrohe 88624000 Tubo Estraibile per Rubinetti Cucina, Piccolo, Cromo
3.8/5

€ 112.22

hot
ICON 00461 Piatto doccia SP100-27" x 24" x 4", bianco polare
3.3/5

€ 442.97

ICON 00461 Piatto doccia SP100-27" x 24" x 4", bianco polare
3.3/5

€ 442.97

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart

Totale:€ 0.00

Vedi carrelloCheckout

Categorie

Tutte le categorie
Menu Categorie Cerca Carrello

Menu