Big Horn 19408 Iniettore di colla ad alta pressione con 2 punte in ottone

Name: Big Horn 19408 Iniettore di colla ad alta pressione con 2 punte in ottone
Brand: BIG HORN
SKU: 0766565194089
Price: 47.25 EUR
Availability: InStock

Brand:BIG HORN

3.5/5

€
47.25

Big Horn 19408 Iniettore di colla ad alta pressione con 2 punte in ottone. Ripara facilmente assemblaggi delicati e molto altro ancora con l'iniettore di colla ad alta pressione di Big Horn con punte in ottone. Ottimo per piccoli mestieri e hobby, inoltre fornisce fino a 550 psi di potenza pressurizzata per entrare nelle aree più piccole Caratteristiche: Fornisce fino a 550 psi di potenza pressurizzata Include iniettore di colla ad alta pressione e punte in ottone 1-16 e 1/32 Utilizzare con colle a base d'acqua

Quantity

Aggiungi al carrello Compra subito

EAN: 0766565194089

Categories: Arti, artigianato e cucito, Creazione, Forniture artigianali, Adesivi, Colle e paste artistiche,

✅ Utilizzare con colle a base d'acqua. ✅ Include iniettore di colla ad alta pressione e punte in ottone 1-16 e 1/32. ✅ Fornisce fino a 550 psi di potenza pressurizzata.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	BIG HORN
Compatible Material	Wood, Plastic
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 339 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	6 x 2.75 x 1.25 inches
Item model number	‎19408
Item Package Quantity	‎1
Item Weight	‎3.99 ounces
Manufacturer	‎Big Horn
Part Number	‎19408
Power Source	Corded Electric
Power Source	‎Corded Electric
Product Dimensions	‎6 x 2.75 x 1.25 inches
Style	Trigger
Style	‎Trigger

5 Star

4 Star

3 Star

2 Star

1 Star

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con^*

La tua valutazione

Scritto da: Amazon Customer

Worked like a charm!

Used it for re-glueing floor tile. It has a thinner tip than a standard caulking tube. Worked great.

Scritto da: Chef Joseph

Good quality

Good quality

Scritto da: AB

Has 2 small size options and the needle adapter tip

This is the best you can buy for DIY wood floor repair. Sturdy, adaptable and comes with spare orings just in case.

Scritto da: Bill

Works pretty well with some design flaws

Used this to fill voids in my floors. Warming the caulk makes it easier to inject. Takes quite a bit of effort to get the stuff into the void. The 1/16th inch hole ends up getting enlarged but I used colored caulk and the holes aren't very noticeable. The problem is with the screw on top and screw on handle. When you unscrew the top to reload, it's difficult not to also unscrew the handle. Biggest problem is with the threads on the cap. It's cheap plastic and the cap pulls off quite easily. Need more sturdy threads. While it worked ok, I'd probably try a different kind next time due to the design issues.

Scritto da: Paul C.

Not useful for squeaky floors

You can’t inject glue into a crack with a round tip. It would take a prism shape to create enough back pressure. And you can’t just inject down or up into a drilled hole with hardwood floors because there is a layer of felt and old floors use boards on a diagonal with gaps, not plywood, so that further complicates things. These old floors squeak because the base boards bow side to side due to drying out, or due to cracks in them, or due to nails that hit along the side of the joist. You really have to get up in there and use thin shims with glue to quiet them (or bend the nails). You can also screw up into the hardwood in difficult cases, or slap 2x4’s with adhesive and screws up alongside a joist. But even with access from below in this manner it is amazingly difficult to isolate and stop these squeaks. It takes time and effort. I don’t see how any of these other quick and easy technologies are going to do much good. There are no easy answers here.

Scritto da: Amazon Customer

Great tool for fixing squeaky hardwood floor

Had a few loose planks on my hardwood floor. Bought it and used with TiteBond III wood glue as recommend by another review. The result was great. Also tried it with TiteBond II that had lower VOC and was cheaper than III, but II was thicker and more difficult to inject.

Scritto da: Pericombobulation53

Used for gluing flooring

Let me fully endorse the use of this glue injector for filling gaps under hardwood flooring. What a great technique! I installed bamboo flooring in our upstairs hallway and for whatever reason, in one spot the boards didn't get glued to the floor properly during installation. Walking over the spot was annoying because you could easily feel it under foot. It felt like walking on a trampoline! I drilled a tiny little hole near the center of the problem area, right on a knot, so you can barely see it. Then I filled it with wood glue using this injector. I was shocked at how much it took! Nearly an entire bottle of glue went into that tiny hole. I marked it off with masking tape so we wouldn't step on it for a few days and voila, worked like a charm! Feels nice and solid underfoot now.

Scritto da: David Von Schmidt

high quality product

I bought this to get rid of the squeak and a hardwood floor drilled a very small hole and squirted the glue in with high pressure worked very well easy to clean quality was very impressive

Scritto da: Blair

Plastic screw head may be a problem

The tool is easy and comfy to use. It also allows needle ends to be used for it - my application is injecting glue into loose wooden connections. I used it with water soluble glue for an easy cleanup. I really do not know how much pressure you can put on it. When I put too much pressure, the black end popped off. It is a plastic end screwed onto a plastic end - so there is only so much pressure you can apply. I ended up holding the body while pressing the plunger. Mind you - this was with a need end and not with the supplied ones. I am not sure how long it will hold up - I would say this is an OK tool, but not as sturdy as I would like.

Scritto da: jsnt

Great product

I bought this to apply glue to fix my squeaky wood floor problem. I couldn't be more happy. It's easy to fill up and clean. I used the large tip and i could push glue as hard as I could without a problem. I highly recommend it for this purpose. I tried the special glue for floors that comes in a tube for caulking guns. The problem is that if you fill up the cavity under the floor the back pressure makes the tube leak from the back; creating a big mess. Also, the glue is too expensive for the purpose and it looks and smells like regular white glue. So I then purchased here this injector and a gallon of regular white glue and it worked great.

Scritto da: Mrs. Brenda Kranenburg

Glue injector.

First I found the top of the handle would keep getting loose....solved that with a drop of crazy glue! Drill a hole (worked best drilled where hardwood is notched...see pic.) Injected about 2 full syringes of glue. Cover hole with painters tape. Don't walk on area for 2 days. Fill hole with wood filler. Done. No squeeks. Works beautifully!

Scritto da: Draco Bellator

Estupendo funcionamiento

El aplicador es muy útil para inyectar pegamento, de muy alta viscosidad, en pisos de madera de ingeniería. Eso sí, requiere fuerza para utilizarlo. Muy buen producto.

Scritto da: GC

works well

This injector is very useful with my squeaky floors. Would of like a larger model, need to refill often when you have a large area to work.