Attwood 14137-7 Kit di montaggio del dispositivo di raffreddamento, 4 pezzi angolari, 2 cinghie elastiche a connessione rapida, resistente alla corrosione

Brand:attwood

3.6/5

44.84

Gli angoli dei dispositivi di raffreddamento rimangono fissati con cinghie per evitare lesioni, danni alla barca e al dispositivo di raffreddamento. Design del cinturino a sgancio rapido. A prova di corrosione. Si fissa con viti #8

Si fissa con viti #8. Il kit di montaggio è composto da 4 basi in plastica e corde elastiche elastiche. Design del cinturino a sgancio rapido e resistente alla corrosione. Aiuta a prevenire danni alla barca e al radiatore. Le cinghie mantengono il dispositivo di raffreddamento in posizione.
Brand Attwood
Brand ‎Attwood
Brand Name ‎Attwood
Chamber Depth ‎12 Inches
Color Unspecified
Color ‎Unspecified
Customer Reviews 4.6 4.6 out of 5 stars 635 ratings 4.6 out of 5 stars
Included Components End Product & Information
Included Components ‎End Product & Information
Item Dimensions LxWxH 12 x 8 x 3 inches
Item Dimensions LxWxH ‎12 x 8 x 3 inches
Item Package Dimensions L x W x H ‎11.1 x 7.44 x 2.56 inches
Item Weight 0.36 Pounds
Item Weight ‎0.36 Pounds
Manufacturer ‎Attwood
Material Other
Material ‎Other
Model Name Attwood Boating Tools
Model Name ‎Attwood Boating Tools
Number of Items ‎1
Package Information Box
Package Information ‎Box
Package Weight ‎0.34 Kilograms
Part Number ‎14137-7
Product Dimensions ‎8"D x 12"W x 3"H
Size ‎One Size
Special Feature Insulated
Special Feature ‎Insulated
Sport Type ‎Boating
Suggested Users ‎Unisex-adult
Team Name Attwood
Team Name ‎Attwood

3.6

12 Review
5 Star
77
4 Star
12
3 Star
5
2 Star
2
1 Star
4

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Travis
Great solution for my cooler
This is perfect to secure a cooler to the floor of your boat. I used this in conjunction with an igloo marine cooler and it worked perfectly. Please note that these do not come with screws and you should purchase the proper stainless steel screws to mount them. Also they will collect dirt under them unless you figure out a way to seal them to the boat floor. Other than that they do exactly what they are supposed to. I installed them in maybe 20 minutes tops. Set down your cooler, place these underneath, slide the cooler to where you want it positioned, make sure the mounting brackets are tight against the cooler and mark. Pull up the cooler, drill your holes using the brackets as guidelines (make sure you have the proper drill bit for the size screw you are using,) put some marine grade silicone sealant in each ones of the holes and screw down.
Scritto da: Raymond Doucette
Dimensions Matter
As advertised - seems comparable in quality to the brackets that I just removed after many years of use. Note that the screw holes are 2.5 inches apart at the center and the mounting holes form an inside angle of 110 degrees. If you draw a triangle with two sides of 2.5 inches and one side of 4.125 inches (4 1/8th) then you have a template that you can use to match up against your existing holes. The inner bracket has a turn radius of 1 inch but because of the long sides you could likely fit a cooler with a turn radius up to about 2.5 inches. I took a risk buying this because i didn't have these dimensions until it arrived - that's why I took a star off the review - these details matter and should have been published by the vendor.
Scritto da: elizabeth russell
Atwood
Bought this for a friend . Worked great
Scritto da: CPT Sy
Good cooler / box mount for inside the boat
Good cooler / box mount for inside the boat, but wished it had larger loops attached that other bungee cords could be used to cross over the cooler diagonally from corner to corner really locking it in place. Instead I bought (4) stainless steel 3" eye screws that will screw into the boat's wood flooring and the eye circle exposed above the mount and attach bungee cords to, put these thru the middle screw hole, works better now. Fairly inexpensive, works good, would recommend instead of constructing corner mounts by yourself from metal corner angles and wood, or other material. Also recommend using stainless steel screws to prevent corrosion issues.
Scritto da: Chris
Thin plastic and no screws for installation
May not last long ,very thin plastic and came with no hardware for installation
Scritto da: Jay Wag
Great buy
Good product I just put these on my boat in the beginning of the season to replace the old ones that of been there for years very easy to install took me a few minutes to do
Scritto da: Daniel M.
Works as intended.
Just the parts I needed to replace my old kit, which was brittle and half broken from constantly battling the elements in the Florida Keys. Wish they made a stronger product. Seems like the life on these is 2 years or so.
Scritto da: Anthony
Strong structure
Easy to use/ install
Scritto da: Jeanne Dennis
Add another secure seat
Make securing cooler easier!
Scritto da: Michael H.
Good holder
Works great
Scritto da: Jim c.
like described fast delivery
like described fast delivery
Scritto da: mike b
Four Stars
Will sdo the trick.

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart